The Trezor Safe 7 Dock is a 3D printed desktop stand built to hold your Trezor Safe 7 at a comfortable angle while making the USB-C connection easier to reach. Instead of laying the wallet flat, chasing the cable around your desk, or leaving it loose between signing sessions, this dock gives the device a simple home base.

Why this dock exists

The Trezor Safe 7 is a serious self-custody tool. The setup around it should feel just as intentional. This dock keeps the wallet upright, stable, and ready to connect to your computer using the USB-C cable that comes with the hardware wallet.

• Designed for Trezor Safe 7: shaped to hold the device nicely without a generic phone-stand fit.
• USB-C cable channel: routes the cable through the front of the dock for a cleaner plug-in setup.
• Desktop friendly: keeps the hardware wallet visible, organized, and easier to grab when it is time to sign.
• 3D printed by CryptoCloaks: made for Bitcoiners who care about their self-custody workspace.
• Color selectable: choose the dock color at checkout. Color does not change the price.

What is included

• 1x CryptoCloaks Trezor Safe 7 Dock in your selected color

What is not included

• Trezor Safe 7 hardware wallet
• USB-C cable

Compatibility

This dock is made for the Trezor Safe 7. It uses the USB-C cable that comes with the hardware wallet. If you need a different holder, check the full Hard Wallet Mounts category for other CryptoCloaks hardware wallet mounts.

FAQ

Does this include the Trezor Safe 7?

No. This listing is for the 3D printed dock only. The hardware wallet is shown for fit/reference and is not included.

Does it include a USB-C cable?

No. It is designed to use the USB-C cable that comes with the Trezor Safe 7.

Does color change the price?

No. Pick the color you want. The dock price stays the same.

Is this a wall mount?

No. This is a desktop dock/stand made to hold the Safe 7 upright near your computer.

The post Trezor Safe 7 Dock – USB-C Hardware Wallet Stand appeared first on CryptoCloaks.

Your ColdCard MK5 should not live loose in a drawer, sliding around your desk, or disappearing under a pile of cables. This CryptoCloaks ColdCard MK5 mount gives your Bitcoin hardware wallet a dedicated spot so it is organized, easy to reach, and ready when it is time to sign.

Printed by CryptoCloaks for bitcoiners who care about clean setups, this mount is a simple upgrade for a serious self-custody desk: low profile, practical, and built around the ColdCard MK5 form factor.

Table of Contents

• What Is the ColdCard MK5 Mount?
• Why a Dedicated MK5 Mount Matters
• ColdCard MK5 Mount Features
• Installation and Setup
• What It Fits
• Why CryptoCloaks
• FAQ

What Is the ColdCard MK5 Mount?

The CryptoCloaks ColdCard MK5 Mount is a 3D printed desk or wall mount designed to hold a ColdCard MK5 hardware wallet in a stable, repeatable place. It is made for people who actually use their ColdCard instead of treating self-custody gear like random junk in a drawer.

Use it near your signing workstation, on a shelf, in a cabinet, or anywhere you want your ColdCard MK5 to stay put without making your desk look like a fiat help desk exploded.

Why a Dedicated MK5 Mount Matters

• Keeps your ColdCard MK5 organized: no more hunting through drawers or desk clutter.
• Makes signing sessions cleaner: your device has a predictable home near your Bitcoin workstation.
• Protects the setup vibe: self-custody gear should look intentional, not tossed around.
• Simple, useful, no gimmicks: a practical mount for a practical Bitcoin tool.

ColdCard MK5 Mount Features

• Designed for the ColdCard MK5 hardware wallet
• 3D printed by CryptoCloaks
• Low-profile holder for desk, shelf, cabinet, or wall placement
• Helps keep your Bitcoin signing device visible and easy to grab
• Clean self-custody desk accessory for home offices, workshops, and Bitcoin setups
• Only $7.99

Installation and Setup

Place the mount where your ColdCard MK5 naturally belongs in your workflow. Depending on your setup, it can be positioned near your computer, signing station, safe area, or Bitcoin desk. Keep your device accessible when you need it and out of the random desk-junk danger zone when you do not.

This listing is for the mount only. ColdCard device, cables, tools, and any other accessories shown in photos are not included unless explicitly stated in the selected product option.

What It Fits

This page is for the ColdCard MK5 Mount. Match the mount to your exact ColdCard generation before ordering so your Bitcoin hardware wallet setup stays clean.

• Laser Etched ColdCard Wallet Cases and Sleeves
• Seedor Safe Starter Set for Bitcoin seed backup

Why CryptoCloaks

CryptoCloaks builds Bitcoin-native 3D printed accessories for people who actually use this stuff. The goal is not novelty plastic. The goal is useful shop-made gear that cleans up your setup, supports real self-custody, and looks like it belongs next to Bitcoin hardware.

If your ColdCard MK5 is part of your long-term Bitcoin plan, give it a real home.

FAQ

Does this fit the ColdCard MK5?

Yes. This product page is for the ColdCard MK5 Mount.

Does this listing include a ColdCard?

No. This listing is for the 3D printed mount only. The ColdCard device is not included.

Is this for the MK5 version?

Yes. This page is for the ColdCard MK5 Mount. Match your mount to your exact ColdCard generation before ordering.

Who is this for?

Bitcoiners who want their ColdCard MK5 organized, visible, and ready at their signing station instead of floating around loose on a desk.

Order the ColdCard MK5 Mount

Clean up the desk. Give the ColdCard MK5 a real spot. Keep your Bitcoin signing setup tight.

The post MK5 ColdCard Mount appeared first on CryptoCloaks.

OneKey Classic 1S
High Quality ABS
1.54 inch LCD
86 x 52 x 5.2 mm
20.5 g
✅
Bluetooth
✅
USB-C
110mA Lithium Battery
Compatible with Mac & PC & Mobile Phone

The post OneKey Hardware Wallet – Official Reseller appeared first on CryptoCloaks.

Your Trezor is worth protecting, but leaving it loose on a desk puts expensive hardware at risk of theft, damage, or simply being knocked to the floor. The Trezor Safe Mount from CryptoCloaks gives your device a secure, discreet home for $7.99, without drilling into walls or settling for a generic shelf that was never designed for a hardware wallet.

Table of Contents

• What Is the Trezor Safe Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the Trezor Safe Mount

The Trezor Safe Mount is a purpose-built bracket designed to hold your Trezor Safe 3 or Trezor Safe 5 securely under a desk, on a wall, or inside a cabinet. CryptoCloaks engineered this mount specifically for these two devices, so the fit is exact rather than approximate. No adapters, no foam padding, no hoping it stays put.

Generic stands treat your hardware wallet like any small gadget. This mount treats it like the secure signing device it is. It keeps your Trezor accessible when you need it and hidden from view the rest of the time, adding a layer of physical security that an open shelf simply cannot provide.

The design supports two installation methods. Use #8 screws for a permanent, rock-solid install. Or choose the 3M tape option for a clean, damage-free placement that will not leave residue on painted surfaces. Either way, the Trezor Safe Mount holds firm once in place and stays there.

Why CryptoCloaks

CryptoCloaks has been operating in the Bitcoin space since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop in America. When you order a Trezor Safe Mount, you are not waiting on an overseas warehouse or trusting a faceless fulfillment center to get the details right.

Every unit is printed to order. That means fresh material, not old stock sitting in a bin for months. It also means CryptoCloaks can offer color options, black or white, and fulfill orders quickly without carrying excess inventory. The result is a product that arrives in good condition and fits as designed.

CryptoCloaks builds mounts for a range of hardware wallets, not just Trezor. If you run a multi-wallet security setup, browse the full lineup at Other hardware wallet mounts to find options for your entire stack. Every product ships from the same American shop, with the same level of care.

Specs and Compatibility

The Trezor Safe Mount fits the Trezor Safe 3 and Trezor Safe 5 only. It does not accommodate older Trezor hardware like the Model One or Model T. If you are unsure which version you own, the Trezor Safe 5 official specs page lists the physical dimensions you need to confirm compatibility before ordering.

• Compatible Models: Trezor Safe 3, Trezor Safe 5
• Mounting Methods: #8 Screws or 3M Tape
• Materials: 3D Printed (to order)
• Colors: Black, White
• Dimensions: 9″ × 6″ × 1″
• Weight: 3 oz
• Price: $7.99
• Fulfillment: Printed to order, ships from America

At 3 oz and $7.99, this is one of the most cost-effective physical security upgrades you can make for your hardware wallet setup. The compact dimensions keep the footprint minimal whether you mount it under a desk, on a wall stud, or inside a storage enclosure.

How It Compares

The Trezor Safe Mount outperforms the alternatives across every dimension that matters: device fit, price, discretion, and installation method. Here is a direct side-by-side breakdown:

DIY solutions require trial-and-error and risk permanent damage to your device housing. Generic stands leave your hardware visible to anyone who walks past. The Trezor Safe Mount solves both problems at $7.99 flat, with no technical skill required for installation.

Frequently Asked Questions

Will this Trezor Safe Mount work with the Trezor Safe 7?

The Trezor Safe Mount is engineered specifically for the Trezor Safe 3 and Trezor Safe 5. Newer models like the Trezor Safe 7 may carry different physical dimensions and are not confirmed compatible with this bracket. CryptoCloaks designs each mount to precise device specifications, so compatibility is never assumed based on brand family alone. If you own a Safe 7 or another newer Trezor variant, contact CryptoCloaks directly to ask whether a compatible mount exists or is currently in development. Older Trezor hardware, including the Model One and Model T, uses a different form factor entirely and will not seat correctly in this bracket. Always verify your exact device model before adding to cart to avoid a return.

Does the 3M tape option damage walls or leave residue?

3M Command-style tape is designed to release cleanly from most painted drywall, wood, and smooth surfaces when removed using the proper pull-tab method. Under typical conditions, you will see no residue and no surface damage after removal. However, results vary depending on wall surface type, paint finish, and how long the tape has been in place. Fresh paint, wallpaper, and heavily textured surfaces carry a higher risk of peeling. CryptoCloaks recommends testing a small strip of 3M tape on an inconspicuous area before committing to a permanent placement. The #8 screw option is always available as an alternative if you prefer a mechanical mount that does not rely on adhesive. Both methods hold the device securely under normal use conditions.

How durable is a 3D printed mount over the long term?

CryptoCloaks prints the Trezor Safe Mount using quality filament selected for structural reliability. Because the mount holds a lightweight device in a static position rather than bearing dynamic mechanical load, the material faces minimal stress in everyday use. Under normal indoor conditions, a properly printed mount will last for years without cracking, warping, or losing its grip on the wall surface. Extended UV exposure can affect some filament types over time, so placing the mount away from direct sunlight is a reasonable precaution. If you ever need a replacement down the line, CryptoCloaks prints every unit to order, so you can reorder an identical mount at any time. At $7.99, replacing one several years from now is a low-stakes decision.

Pick up your Trezor Safe Mount today and stop leaving your hardware exposed. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Trezor Safe Mount appeared first on CryptoCloaks.

Maximalist’s rejoice! Your favorite wallet finally has a mounting solution!

Info:
– #8 Screws (Screw) OR 3M Tape (Screwless)
– 3D Printed to order!

The post MK3 ColdCard Mount appeared first on CryptoCloaks.

Info:
– #8 Screws (Screw) OR 3M Tape (Screwless)
– 3D Printed to order!

The post Trezor One Mount appeared first on CryptoCloaks.

ColdCard MK4 Mount: Purpose-Built for Your Bitcoin Hardware Wallet

Your ColdCard is sitting loose on a cluttered desk or rattling around in a drawer. That is no way to treat the device guarding your bitcoin. The ColdCard MK4 mount from CryptoCloaks puts your hardware wallet exactly where it belongs, locked in, organized, and ready when you need it.

Table of Contents

• What Is the ColdCard MK4 Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the ColdCard MK4 Mount

The ColdCard MK4 mount is a 3D printed holder designed from the ground up to fit the Coinkite MK4 form factor. It holds your COLDCARD MK4 hardware wallet securely on a desk, shelf, under a monitor, or anywhere else in your setup. This is not a universal adapter or a generic slot that sort of fits. It was built for the MK4 specifically.

One verified buyer put it simply: the fit was “like an absolute glove.” That kind of feedback does not come from a generic holder. It comes from a product designed around the exact dimensions of the device it holds. CryptoCloaks confirmed that fit before putting it on the market, and customers continue to confirm it after the fact.

Additionally, the ColdCard MK4 mount works with both the original Coinkite clear sleeves and CryptoCloaks cases and sleeves. You do not have to strip your wallet bare just to dock it. That compatibility is intentional, not accidental, and it sets this product apart from any DIY solution you might cobble together.

Why CryptoCloaks

CryptoCloaks has been building bitcoin hardware accessories since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop. When you order a ColdCard MK4 mount from CryptoCloaks, it comes from a person who understands this space, not a dropshipper who does not know a ColdCard from a thumb drive.

Every mount is printed to order. That means fresh parts, not old shelf stock. It also means customization is on the table. Choose from 20 colors: Black, Cherry Red, Red, Orange, Yellow, White, Florescent Green, Green, Dark Green, Dark Blue, Blue, Clear, Beige, Bronze, Silver, Purple, Pink, Marble, Gold, and Teal. Add custom text engraving for an additional $3.00, which is a useful option for labeling wallets in a multisig setup or simply making the piece your own.

If you want a full protection solution alongside your mount, pair it with the ColdCard MK4 case and sleeve from CryptoCloaks. Both products are designed to work together. The mount fits whether your wallet is in a case or not, so you never have to choose between organized and protected.

Specs and Compatibility

The ColdCard MK4 mount ships ready to install. Full specifications are listed below.

• Price: $7.99 (on sale from $9.99)
• Weight: 3 oz
• Dimensions: 9 x 6 x 1 in
• Mount Method: #8 Screws or 3M Tape
• Default Color: Black
• Color Options: 20 colors including Black, Cherry Red, Teal, Marble, Gold, Purple, and more
• Custom Text Engraving: Available for +$3.00
• Compatibility: MK4 ColdCard with Original Clear Sleeves or CryptoCloaks Cases and Sleeves
• Production: 3D printed to order in the USA
• SKU: CC-HW-MK4COLDMOUN

The dual install system deserves a closer look. Screw mounting with standard #8 screws gives you a permanent, rock-solid installation on wood, drywall, or metal. The 3M tape option handles renters, shared workspaces, or any surface where drilling is not practical. No other purpose-built ColdCard MK4 mount on the market gives you both methods in a single product at this price point.

How It Compares

Coinkite sells the wallet but offers zero mounting or organization accessories. Generic DIY options exist, but none are fit-tested for the MK4 specifically. The ColdCard MK4 mount from CryptoCloaks is effectively the only purpose-built solution on the market. Here is how it stacks up.

Frequently Asked Questions

Does the ColdCard MK4 mount work with CryptoCloaks cases and sleeves on the wallet?

Yes. The ColdCard MK4 mount is designed to accommodate the MK4 with both the original Coinkite clear sleeves and CryptoCloaks cases and sleeves installed. Most generic holders require you to remove any case before docking your wallet, which adds friction to your daily routine and increases the risk of dropping or mishandling the device. CryptoCloaks built this mount to work with their own cases from the start, so the compatibility is tested and intentional, not a lucky coincidence. If you are running a CryptoCloaks case on your MK4, the mount accepts it without modification, forced fitting, or any compromise to the hold. You get organization and protection at the same time.

Can I mount this under a desk without screws?

Yes. The ColdCard MK4 mount fully supports 3M tape installation, which makes undersurface or screwless mounting straightforward. This is the right choice for renters, anyone in a shared office, or setups where drilling into a surface is not an option. The 3M tape method holds firmly on most clean, flat surfaces, including the underside of desks, the back panels of shelving units, and the stands of monitor arms. If you later need to relocate your setup, the tape removes cleanly from most surfaces without leaving residue or damage. Screw mounting with standard #8 screws remains available for those who want a fully permanent installation that does not flex or shift over time.

What screw size do I need to install the ColdCard MK4 mount?

The ColdCard MK4 mount uses standard #8 screws for permanent installation. This is one of the most common screw sizes available at any hardware store, so you will not need to track down specialty fasteners or order anything additional. The #8 size provides a solid, reliable hold on wood surfaces, drywall with appropriate anchors, and metal with the right hardware for the surface type. If drilling is not an option for your setup, the 3M tape method is a fully supported alternative that requires no tools and no fasteners at all. Both installation methods are designed to hold the mount firmly in a stationary workspace so your wallet stays secure and accessible during daily use.

Order your ColdCard MK4 mount today and give your hardware wallet a setup that reflects how seriously you take your bitcoin security. Choose from 20 colors, add custom engraving for $3.00, and get a purpose-built fit that no generic solution can match. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post MK4 ColdCard Mount appeared first on CryptoCloaks.

Your BitBox02 sits on your desk in plain sight, and that is a problem. The CryptoCloaks BitBox02 hardware wallet mount fixes that with a purpose-built, 3D-printed holder that keeps your device concealed, within reach, and locked in place.

Table of Contents

• What Is the BitBox Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the BitBox02 Hardware Wallet Mount

The BitBox Mount is a 3D-printed holder designed from the ground up for the BitBox02 hardware wallet. CryptoCloaks prints each unit to order from its shop in America, in your choice of 18+ colors. No generic shelf product here. Every piece is made fresh for your specific order.

This BitBox02 hardware wallet mount attaches under your desk, behind your monitor, or anywhere you want your device concealed and accessible. The dual mounting system gives you two real options: drive four #8 screws for a permanent, rigid install, or use 3M adhesive tape for a completely screwless setup. Renters, apartment dwellers, and no-drill setups are fully covered.

Shiftcrypto builds an excellent device with the BitBox02 Bitcoin-only hardware wallet by Shiftcrypto, but they sell no mounting solution of any kind. That gap is exactly what this BitBox02 hardware wallet mount was built to fill.

Why CryptoCloaks

CryptoCloaks has been operating in the bitcoin hardware space since 2017. Ricky, the founder, personally picks, prints, and ships every single order. When you buy a BitBox02 hardware wallet mount from CryptoCloaks, a real person with skin in the game handles your order before it ships. That is not something a mass-production warehouse can offer.

Most 3D-printed accessories come in one color: whatever filament was loaded that day. CryptoCloaks offers 18+ color options on every mount, plus optional custom text for an additional $3.00. Your setup, your look. Additionally, this BitBox02 hardware wallet mount is part of a broader lineup of purpose-built bitcoin accessories. Browse the full collection of hard wallet mounts for all major hardware wallets if you run more than one device.

The default color is black. However, if you want something that matches your desk setup or stands out as a statement piece, the color upgrade is just $3.00. Custom text on the BitBox02 hardware wallet mount runs the same price. Both can be added to a single order without pushing the total into painful territory.

Specs and Compatibility

• SKU: CC-HW-BITBMOUN
• Price: $7.99 (sale from $9.99)
• Weight: 1 oz
• Dimensions: 9 x 6 x 1 in
• Default color: Black
• Color options: 18+ colors available (+$3.00)
• Custom text: Yes (+$3.00)
• Mounting options: #8 screws (4x) or 3M tape (screwless)
• Manufacture: 3D printed to order in America
• Wallet compatibility: BitBox02 (all editions, including Bitcoin-only)
• Wallet included: No

This BitBox02 hardware wallet mount fits both the standard BitBox02 and the Bitcoin-only edition. Shiftcrypto uses identical physical dimensions across both variants. The form factor, port placement, and body shape are the same, so the mount works for both without modification or adapters.

How It Compares

No competitor sells a purpose-built BitBox02 hardware wallet mount. Shiftcrypto focuses on firmware and device security, not desk accessories. The only alternative is a DIY solution from scrap materials or a generic bracket that was never designed for the BitBox02 form factor. Therefore, this mount stands alone in its category.

Frequently Asked Questions

Does this mount fit the BitBox02 Bitcoin-only edition?

Yes. The BitBox02 hardware wallet mount from CryptoCloaks fits both the standard BitBox02 and the Bitcoin-only edition. Shiftcrypto uses the same physical dimensions for both variants of the device. The body shape, port placement, and overall footprint are identical across editions. CryptoCloaks designed this BitBox02 hardware wallet mount around those shared dimensions, so you do not need to specify which edition you own when placing your order. Whether you run the multi-edition firmware or the Bitcoin-only edition, the mount holds your device securely in place. No modifications, no adapters, and no additional hardware required. Mount it, connect your device, and get on with your stack.

Can I install the BitBox mount without drilling any holes?

Yes. The CryptoCloaks BitBox02 hardware wallet mount ships with two installation methods built in. The first is a traditional screw mount using four #8 screws for a permanent, rigid install on wood or drywall surfaces. The second is a fully screwless option using 3M adhesive tape. The tape option holds firmly on flat surfaces including the underside of desks, the back of monitors, and smooth wall panels. This makes the BitBox02 hardware wallet mount a practical choice for renters, people in shared office spaces, or anyone who prefers not to put hardware into their furniture. Press the tape-backed mount into place, allow the adhesive to set for a few hours, and your device is secured without a single hole drilled.

Is the BitBox02 hardware wallet included with the mount?

No. This listing is for the BitBox02 hardware wallet mount only. The BitBox02 device itself is sold separately by Shiftcrypto and is not included here. CryptoCloaks makes the physical mounting accessory. Shiftcrypto makes the wallet. If you are looking to purchase a BitBox02, visit the official Shiftcrypto site directly. The BitBox02 hardware wallet mount from CryptoCloaks is designed to work with a device you already own or are purchasing separately. Make sure you have the wallet before ordering, because this mount is printed to order specifically for you and cannot be returned once it has been manufactured.

Order your BitBox02 hardware wallet mount today for $7.99. Pick from 18+ colors, add custom text if you want it, and get a purpose-built mount that fits your device and your setup. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post BitBox Mount appeared first on CryptoCloaks.

Your hardware wallet is either in a drawer where anyone can find it, or buried somewhere you will forget. The bitcoin honey badger statue from CryptoCloaks solves both problems: a desk piece with real Bitcoin culture behind it and a hidden sliding drawer engineered to hold your ColdCard, Ledger, or Trezor.

Table of Contents

• What Is the Bitcoin Honey Badger Statue
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the Bitcoin Honey Badger Statue

The bitcoin honey badger statue is functional cold storage art. Every size ships with a concealed sliding drawer built into the base, sized to hold real hardware wallets. It sits on your desk and looks like bitcoin desk decor. That is entirely the point.

The design traces directly back to the Bitcoin community. ZLOK created the original 2D graphic, a piece recognized by anyone who has spent time in Bitcoin circles. NVK, founder of Coinkite and creator of the ColdCard hardware wallet, later refined the vector version. CryptoCloaks converted that community-authenticated artwork into a printable 3D model. This is not a generic crypto figurine. It carries provenance that means something inside the Bitcoin community and nothing to anyone outside it, which is exactly how good OPSEC works.

Three sizes give buyers precise control over what fits inside. Each size ships with documented wallet compatibility so you know before purchasing whether your specific device fits. The small handles Ledger S, Trezor 1, Opendimes, and SD cards. The medium adds ColdCard, Ledger X, and Trezor T. The large stores multiple ColdCards alongside the full Ledger and Trezor lineup. Every bitcoin honey badger statue is printed to order by Ricky, who handles every print and every package personally from his shop in America.

Why CryptoCloaks

CryptoCloaks has been building Bitcoin hardware products since 2017. This is not a side hustle or a print-on-demand dropship operation. Ricky runs a focused one-person shop where he controls every step from print settings to shipping label. When you order a bitcoin honey badger statue from CryptoCloaks, a human who understands Bitcoin is making it for you.

The shop builds for bitcoiners, not tourists. The design credits tell you everything: ZLOK and NVK are not household names outside of Bitcoin culture. That is what makes this piece worth putting on a serious desk. CryptoCloaks also manufactures a full range of hardware wallet protection, including the ColdCard case and accessories, for buyers who want complete physical security for their cold storage setup.

Additionally, because each unit is 3D printed to order, minor surface variation between units is normal and expected. You are not buying a factory-stamped replica off a warehouse shelf. You are buying a made-to-order piece with the organic character that comes from real print runs. That variation is a property of the medium, not a defect.

Specs and Compatibility

All three sizes of the bitcoin honey badger statue include the hidden sliding drawer. Choose based on which wallets you need to store.

• Small (6″ x 2″ x 2″): Fits Ledger S, Trezor 1, Opendimes, Micro SDs, SD cards
• Medium (8″ x 2.5″ x 2.5″): Fits ColdCard, Ledger S and X, Trezor 1 and T
• Large (11″ x 3.5″ x 3.5″): Fits multiple ColdCards, Ledger S and X, Trezor 1 and T
• Hidden drawer: Yes, included on all sizes
• ColdCard compatibility: Medium and Large only
• Material: 3D printed, each unit varies slightly
• Production time: 5 business days before shipment
• Price range: $29.99 to $129.99
• Designer credits: ZLOK (2D artwork), NVK (vector refinement), CryptoCloaks (3D conversion)
• SKU: CC-BG-BITCHONEBADG

Self-custody is a core principle of Bitcoin as a protocol. Storing your hardware wallet inside a purpose-built piece that looks like bitcoin desk decor is consistent with that philosophy. The Bitcoin open-source protocol exists so that individuals can hold their own keys without relying on third parties. Your storage solution should match that standard.

How It Compares

Generic bitcoin merchandise fills marketplaces. Here is how the bitcoin honey badger statue from CryptoCloaks measures up against what you will find elsewhere.

Frequently Asked Questions

Which size fits a ColdCard hardware wallet?

The ColdCard fits in the Medium and Large bitcoin honey badger statue. The Small (6″ x 2″ x 2″) is built for slimmer devices: Ledger S, Trezor 1, Opendimes, Micro SDs, and standard SD cards. Its drawer opening is not wide enough to seat a ColdCard. The Medium (8″ x 2.5″ x 2.5″) is the minimum size for ColdCard storage and also accommodates Ledger S, Ledger X, Trezor 1, and Trezor T. If storing a ColdCard is your primary goal, the Medium is the most direct entry point. The Large gives you room for a ColdCard alongside backup media and additional devices. When in doubt about fit, size up.

Can I store multiple hardware wallets in the large Bitcoin Honey Badger?

Yes. The Large bitcoin honey badger statue measures 11″ x 3.5″ x 3.5″ and its drawer is built to hold multiple ColdCards alongside Ledger S, Ledger X, Trezor 1, and Trezor T devices. If you run a multisig setup or manage wallets for more than one person, the Large keeps everything together in one discrete location. It also accommodates backup seed cards, Opendimes, and flat storage media alongside your primary hardware wallets. This is the right size for serious cold storage setups where capacity matters. The Small and Medium cover single-wallet use cases. The Large is for bitcoiners who store more than one device.

Is the honey badger statue solid or does it have a compartment inside?

Every size of the bitcoin honey badger statue includes a functional hidden sliding drawer built into the base. The exterior looks like a standard piece of bitcoin desk decor, which is the entire point of the design. The drawer is not decorative. CryptoCloaks engineered the compartment dimensions around the actual form factors of common hardware wallets, so the fit is deliberate. From the outside, nothing signals that storage is present. That matters for anyone applying basic OPSEC principles at home. This is the core feature that separates it from generic bitcoin gift items that carry no utility beyond visual novelty. If you need to store a wallet, this statue does the job without advertising that fact.

Pick your size, add to cart, and get your bitcoin hardware wallet off the counter. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Bitcoin Honey Badger appeared first on CryptoCloaks.

Trezor T Mount: Dual Mounting Options, Precision Fit, $7.99

Your Trezor Model T deserves better than sitting loose on a desk or getting buried in a drawer between uses. This Trezor T mount is built specifically for the Model T, giving your hardware wallet a permanent, accessible home without the compromises that come with generic alternatives.

Table of Contents

• What Is the Trezor T Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the Trezor T Mount

The Trezor T mount is a purpose-built 3D printed holder designed exclusively for the Trezor Model T hardware wallet. CryptoCloaks engineered it from scratch to fit the Model T’s exact dimensions, not adapted from a phone stand or a repurposed charging dock. The result is a snug, secure fit that keeps your wallet accessible and properly oriented at all times.

Where the Trezor T mount separates itself from everything else on the market is the dual mounting system. You get two real installation paths: four #8 screws for a permanent, rock-solid mount on any wall or surface, or 3M adhesive tape for a damage-free temporary setup. Renters, home office setups, and anyone who rotates their hardware around multiple workspaces will appreciate having both options in a single product at a single price.

CryptoCloaks prints every unit to order. There is no warehouse full of identical plastic parts sitting around. Each Trezor T mount ships in the color you choose, black or white, produced specifically for your order. That is how made-to-order hardware is supposed to work.

Why CryptoCloaks

CryptoCloaks has been building bitcoin-native hardware accessories since 2017. Ricky, the founder, personally handles printing, quality control, and shipping from his shop in America. When you order a Trezor T mount from CryptoCloaks, a real person who has been in this space for years is handling your order before it goes in the box.

The made-to-order production model matters beyond freshness. It means CryptoCloaks can offer customization that mass-produced competitors cannot. The color options at checkout are the actual colors being printed, not marketing photography. Additionally, because production scales with demand rather than anticipating it, there is no overproduction waste baked into the price or the process.

At $7.99, this is the most affordable dedicated Trezor T mount available anywhere online. If you want to see what else CryptoCloaks builds for securing and displaying your hardware, browse other hardware wallet mounts in the full catalog. The same level of precision and bitcoin-native thinking goes into every product in the lineup.

Specs and Compatibility

If you already understand why hardware wallets matter for securing your bitcoin, you know that dedicated mounting is part of that discipline too. Keeping your Model T in a fixed, accessible position reduces handling, reduces risk, and keeps your setup clean. The Trezor T mount below is built with that operational mindset in mind.

• Dimensions: 9 × 6 × 1 inch
• Weight: 3 oz
• Material: 3D printed durable plastic
• Mounting Options: 4 #8 screws (permanent) or 3M adhesive tape (damage-free)
• Colors Available: Black, White
• Production: Made to order
• Compatibility: Trezor Model T only
• Price: $7.99
• Ships: 2-3 business days

How It Compares

The Trezor T mount from CryptoCloaks is not competing against other premium options. It is competing against generic Amazon docks, the included magnetic stand that ships with the Trezor itself, and charger docks that were never designed with the Model T in mind. Here is how it stacks up directly:

Frequently Asked Questions

Can I use this mount with the Trezor T’s included magnetic mount?

The CryptoCloaks Trezor T mount is a standalone solution and is not designed to interface with the magnetic stand included in the Trezor box. The magnetic stand that ships with the Trezor Model T uses a proprietary base system, which limits where and how you can position it. Most users find the included magnetic stand works fine on a flat desk but offers no real wall or vertical mounting path. The CryptoCloaks Trezor T mount bypasses that limitation entirely. You choose between four #8 screws for a permanent wall or surface installation, or 3M adhesive tape for a no-drill setup that still holds firm. If you want the magnetic option for travel or portability, keep it for that purpose. For a dedicated, fixed workspace position with more placement flexibility, the CryptoCloaks version is the better tool for the job.

Does the 3M tape option damage walls or desks, and is it removable?

3M adhesive tape, when applied and removed correctly, is designed to be damage-free on most clean, painted, and smooth surfaces. The removable adhesive category used with the Trezor T mount follows the same approach as the standard damage-free hanging solutions most people already use in their homes. That said, surface conditions vary. Older paint, textured walls, or certain desk finishes may respond differently than a clean modern surface. The standard approach is to press the mount firmly after applying, allow the adhesive to cure for at least 24 hours before loading your wallet into the holder, and when removing, pull the tape tab slowly at a low angle rather than yanking straight out from the wall. If you are uncertain about your specific surface, the screw mount option gives you a permanent installation path that does not rely on adhesive at all. Both options ship with the mount.

What is the difference between the screw mount and the screwless 3M tape option?

The screw mount uses four #8 screws to anchor the Trezor T mount directly into a wall stud, drywall anchor, or desk surface. This is the permanent option. It will not shift, flex, or move once installed, and it supports the weight of the Model T without any concern about adhesive fatigue over time. The 3M tape option skips the drilling entirely. You peel, press, and hold. It is the right choice for renters, temporary workspaces, or anyone who wants the flexibility to reposition the mount without putting holes in walls or surfaces. Both options come with the mount at checkout, so you are not sourcing hardware separately or hunting down the right adhesive strips on your own. You decide at installation which setup fits your specific situation, and everything you need is already in the package.

Order your Trezor T mount today and give your Model T a dedicated, secure home that fits your workspace. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Trezor T Mount appeared first on CryptoCloaks.