Hammer Miner Thor P2 10 TH/s Home Bitcoin Miner

The Thor P2 fills the gap between small single-chip desktop miners and loud, high-current industrial ASICs. It puts up to 10 TH/s of real Bitcoin hashrate on a desk or shelf while staying on a standard household outlet and drawing no more than approximately 157W in its published Overclock profile.

Unlike a bare board that still needs a power supply, cooler, fan, stand, and wiring, the Thor P2 arrives assembled, tested, and firmware-flashed. Its 240W power adapter, 120mm tower cooler, eight copper heatpipes, ARGB fan, ABS stand, color display, and network hardware are already part of the package.

Use the purchase controls above to order the Hammer Miner Thor P2 from CryptoCloaks.

Want the deeper analysis first? Read our 3,400-word Hammer Miner Thor P2 research review for source-by-source wall-power ranges, independent video observations, Thor OS firmware history, electricity costs, setup checks, and comparisons with four other home Bitcoin miners.

Choosing between dual-chip miners? Our Bitaxe Naja Duo vs Hammer Thor P2 comparison separates dashboard power from wall power and compares efficiency, power supplies, Ethernet, cooling, size, warranty, and monthly electricity cost.

Why choose the Thor P2?

• Up to 10 TH/s: dual BM1373 SHA-256 mining performance in a home-friendly format.
• Three tested modes: move between lower power, balanced operation, and maximum hashrate.
• Measured wall-power figures: compare electricity use using approximately 60W, 88W, and 157W rather than firmware estimates alone.
• Serious cooling: a 120mm tower heatsink, eight copper heatpipes, and 120mm fan provide thermal headroom.
• WiFi plus Ethernet: use easy wireless setup or a stable wired connection for 24/7 mining.
• Local display and dashboard: check hashrate, pools, settings, block data, and Bitcoin price information.
• 240W PSU included: the 12V/20A adapter leaves headroom above the published 157W maximum mode.
• Pool or solo-pool: choose steadier pool payouts or probabilistic solo mining.
• ARGB lighting: select color cycle, marquee, breathing, flashing, or turn the lighting off.
• Compact footprint: approximately 5.99 x 5.7 x 6.94 inches and 1 lb 13 oz.

Thor P2 hashrate, power, efficiency, and noise

These published mode figures are tested starting points, not guaranteed output. Actual results vary with firmware, tuning, ambient temperature, airflow, power quality, network conditions, and individual hardware. The detailed source table reports power measured at the wall.

Start with a tested mode and verify stable temperature, accepted shares, fan behavior, and network uptime before changing frequency or voltage. Higher hashrate settings create more heat and may reduce efficiency.

Eight-heatpipe cooling built for sustained mining

Two BM1373 chips need more cooling than a typical single-chip desktop board. The Thor P2 uses a 120mm tower cooler with eight copper heatpipes and a full-size ARGB fan. The larger surface area lets the fan move heat without using the high-speed blower system found in industrial miners.

Keep the fan intake and exhaust open. Do not place the miner in a sealed cabinet, against a wall that blocks airflow, or in a wet, dusty, or excessively humid area. Published ambient operating range is 0 to 45 degrees Celsius.

WiFi, Ethernet, color display, and local controls

The LilyGO T-Display S3 controller combines an ESP32-S3 with a color LCD. The interface can show live hashrate, mining status, pool configuration, device settings, block monitoring, and Bitcoin price information. The local dashboard provides a larger view for performance and configuration.

WiFi keeps first-time placement flexible. Ethernet is the better choice when the miner can reach a cable because it removes wireless interference and signal quality from the mining path.

What’s included

• Hammer Miner Thor P2 dual-BM1373 Bitcoin miner
• 3D-printed ABS desktop stand
• 12V/20A 240W AC power adapter with XT60 connector
• US AC power cable
• EU AC power cable

You still need: a wall outlet, WiFi or Ethernet network connection, a compatible Bitcoin pool or solo-pool endpoint, and payout information required by your chosen service. An Ethernet cable is not listed as included.

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases.

Thor P2 specifications

Thor P2 vs CryptoCloaks home Bitcoin miners

The Thor P2 is the middle step for buyers who want substantially more hashrate than a single-chip miner while staying well below industrial power and noise.

Compare CryptoCloaks home Bitcoin miners by hashrate, power, noise, and connectivity.

Pool mining vs solo mining

Pool mining combines your hashrate with other miners and pays according to the pool’s rules and your contributed work. It is the practical choice for smaller, more frequent payouts, but results still depend on pool terms, fees, uptime, Bitcoin price, network difficulty, and electricity cost.

Solo-pool mining gives the full block reward to the winning miner after any service terms, but the odds of finding a block at 10 TH/s remain extremely long and no result is guaranteed. Solo mining is best treated as a Bitcoin hobby, network participation, and probabilistic experiment rather than predictable income.

Hammer Miner Thor P2 setup

1. Place the assembled miner on a flat, stable surface with clear air around the 120mm fan and heatsink.
2. Connect the included XT60 power adapter to the miner, then connect the correct AC cable to a 100-240V outlet.
3. For wired networking, connect an Ethernet cable. For WiFi, connect a phone or computer to the temporary setup network shown by the miner.
4. Open 192.168.4.1 while connected to the setup network, enter the 2.4GHz WiFi name and password, save, and restart.
5. Open the miner’s local interface after it joins your network.
6. Enter the pool URL, worker name, and payout details required by your pool or solo-pool service.
7. Start in Low Power or Normal mode and verify temperature, hashrate, accepted shares, fan speed, and network stability.
8. Use Overclock mode only with unrestricted airflow and active temperature monitoring.

Heat, noise, and honest operating expectations

Nearly all electrical power used by a Bitcoin miner becomes room heat. The Thor P2 adds approximately 60W of heat in Low Power mode, 88W in Normal mode, or 157W in Overclock mode. That is far below a typical industrial ASIC, but it is still noticeable in a small closed room over time.

Published sound figures range from approximately 35 to 44 dB. Distance, fan condition, ambient temperature, nearby walls, desk vibration, and room acoustics affect what you hear. Treat the ratings as comparison points, not promises for every room.

Hammer Miner Thor P2 FAQ

How much hashrate does the Thor P2 produce?

Published targets are approximately 4.8 TH/s in Low Power mode, 6.8 TH/s in Normal mode, and 10 TH/s in Overclock mode. Actual results vary with tuning and operating conditions.

How much power does the Thor P2 use?

The detailed measured-at-the-wall mode table lists approximately 60W, 88W, and 157W. The package includes a 240W power supply with headroom above the published maximum mode.

How efficient is the Thor P2?

Published efficiencies are approximately 12.5 J/TH in Low Power mode, 12.9 J/TH in Normal mode, and 15.7 J/TH in Overclock mode.

How loud is the Hammer Miner Thor P2?

Published figures are approximately 35 dB on Low Power, 41 dB on Normal, and 44 dB on Overclock. Room acoustics, distance, fan speed, and ambient temperature affect perceived noise.

Does the Thor P2 include a power supply?

Yes. It includes a 12V/20A 240W adapter with XT60 connector plus US and EU AC power cables.

Does the Thor P2 support Ethernet?

Yes. The Thor P2 supports both 2.4GHz WiFi and Ethernet. An Ethernet cable is not listed as included.

What ASIC chips are in the Thor P2?

It uses two Bitmain BM1373 SHA-256 ASIC chips from Bitmain’s 3nm generation.

Can the Thor P2 mine Bitcoin?

Yes. It performs SHA-256 hashing used for Bitcoin mining and supports compatible pool and solo-pool endpoints.

Can I solo mine with the Thor P2?

Yes, through a compatible solo-pool or supported solo configuration. Finding a block is probabilistic, the odds are extremely long, and no block or return is guaranteed.

What comes in the Thor P2 box?

The package includes the assembled and tested miner, ABS stand, 240W power adapter, US AC cable, and EU AC cable.

Can I change the fan lighting?

Yes. The ARGB fan supports color cycle, marquee, breathing, and flashing effects, and the lighting can be turned off.

Is Bitcoin mining with the Thor P2 profitable?

Profitability changes with Bitcoin price, network difficulty, block rewards, pool fees, uptime, selected mode, and electricity cost. CryptoCloaks does not promise a fixed return or block result.

The post Hammer Miner Thor P2 | 10 TH/s Home Bitcoin Miner appeared first on CryptoCloaks.

Hammer Miner Thor X1 3.2 TH/s Home Bitcoin Miner

The Thor X1 brings meaningful SHA-256 hashrate into a small desktop format without the electrical work, industrial noise, or several-hundred-watt load of a full-size ASIC. Connect the supplied USB-C power adapter, join a 2.4GHz WiFi network, enter your Bitcoin mining pool information, and monitor performance from the miner’s screen and local interface.

Its newest-generation BM1373 ASIC is tuned for efficiency. Low Power mode targets approximately 2.1 TH/s at only 22W, while Overclock mode reaches approximately 3.22 TH/s at 46W. That range lets you choose whether your room needs the quietest operation, the best balance, or maximum available hashrate.

Why choose the Thor X1?

• Up to 3.22 TH/s: real SHA-256 Bitcoin mining performance from a compact desktop miner.
• 22–46W operating range: far below the power demand of industrial ASIC miners.
• As low as 10.6 J/TH: efficient low-power tuning based on the BM1373 chip.
• Three performance profiles: select Low Power, Normal, or Overclock mode.
• Built-in color display: see hashrate, efficiency, temperature, fan speed, shares, pool data, and configuration details.
• USB-C power: the included 65W supply keeps deployment simple.
• 2.4GHz WiFi: configure and monitor the miner over your local network.
• Desktop-friendly acoustics: published figures range from approximately 34 to 51 dB depending on profile.
• Complete package: miner, stand, USB-C power supply, and both US/Canada and EU cords are included.

Thor X1 hashrate, power, efficiency, and noise

The Thor X1 is not locked to one operating point. Published profile figures are targets rather than guarantees; actual results can vary with firmware, ambient temperature, WiFi conditions, chip quality, fan behavior, and user configuration.

Higher settings produce more heat and noise. Keep the fan intake and exhaust clear, use the supplied power system, and confirm stable temperatures after changing profiles.

Built-in Bitcoin mining dashboard

The Thor X1’s color display puts useful mining data directly on the device. Available screens show live hashrate, J/TH efficiency, temperature, accepted shares, current pool, best difficulty, Bitcoin price, uptime, voltage, frequency, fan speed, power draw, network address, and ASIC configuration.

What’s included

• Hammer Miner Thor X1 desktop Bitcoin miner
• Purpose-built desktop stand
• 65W USB Type-C power supply
• NEMA 5-15P power cord for the United States and Canada
• CEE 7/7 EU power cord

You still need: a 2.4GHz WiFi network, a compatible Bitcoin mining pool or solo-pool destination, and a Bitcoin payout address or pool account as required by your chosen service.

Thor X1 specifications

Thor X1 vs other CryptoCloaks home Bitcoin miners

The Thor X1 is for buyers who value new-chip efficiency and very low power draw more than raw hashrate per dollar. It sits above entry-level single-chip miners but below larger multi-chip desktop systems.

• Choose the Thor X1 for BM1373 efficiency, three power modes, a polished color display, USB-C simplicity, and up to 3.22 TH/s.
• Choose the Hammer Miner BC01 when lower purchase price matters more than maximum hashrate.
• Choose the Hammer Miner BC04 when you want more hashrate and Ethernet at a higher power draw.
• Choose the Hammer Miner BC08 for a larger jump to approximately 12 TH/s.
• Choose the GekkoScience KBox for an enclosed all-in-one system with Ethernet, integrated AC power, and up to 22 TH/s.

Hammer Miner Thor X1 setup

1. Place the miner and stand on a stable surface with open airflow around the fan and electronics.
2. Connect the included 65W USB-C power supply and the correct regional power cord.
3. Power on the Thor X1 and join a 2.4GHz WiFi network.
4. Open the miner’s local configuration interface from a device on the same network.
5. Enter your Bitcoin pool or solo-pool URL, worker name, and payout information as required.
6. Start with Low Power or Normal mode and confirm stable hashrate, temperature, fan speed, and accepted shares.
7. Use Overclock mode only with adequate airflow and careful temperature monitoring.

Firmware resources are maintained by Hammer Miner at the official Hammer Miner GitHub organization. Use only firmware intended for the exact Thor X1 hardware revision.

Hammer Miner Thor X1 FAQ

How much hashrate does the Thor X1 produce?

Published targets are approximately 2.1 TH/s in Low Power mode, 2.7 TH/s in Normal mode, and 3.22 TH/s in Overclock mode. Actual results vary with configuration and operating conditions.

How much power does the Thor X1 use?

Published figures are approximately 22W on Low Power, 34W on Normal, and 46W on Overclock. The package includes a 65W USB-C power supply.

How efficient is the Thor X1?

The lowest-power profile is rated at approximately 10.6 J/TH. Normal and Overclock targets are approximately 12.6 and 14.2 J/TH.

How loud is the Hammer Miner Thor X1?

Published figures are approximately 34 dB on Low Power, 44 dB on Normal, and 51 dB on Overclock. Room acoustics, distance, fan condition, and ambient temperature affect perceived noise.

Does the Thor X1 include a power supply?

Yes. The package includes a 65W USB-C power supply plus NEMA 5-15P and CEE 7/7 power cords.

Does the Thor X1 support WiFi?

Yes. It connects to 2.4GHz WiFi for configuration and mining. It is not listed as an Ethernet miner.

Can the Thor X1 mine Bitcoin?

Yes. The BM1373 ASIC performs SHA-256 hashing used for Bitcoin mining. You must configure a compatible pool or solo-pool destination.

Can I solo mine with the Thor X1?

Yes. You can configure a compatible solo-pool endpoint, but finding a Bitcoin block is probabilistic and never guaranteed.

Can I use the Thor X1 as a heater?

Like nearly all miners, its electrical input becomes room heat. At 22–46W it produces gentle localized heat, not the output of a conventional space heater.

Is overclocking supported?

The published Overclock profile targets approximately 3.22 TH/s at 46W. Higher settings increase heat and fan noise, so maintain clear airflow and monitor temperatures.

What comes in the Thor X1 box?

The package includes the miner, desktop stand, 65W USB-C power supply, a US/Canada NEMA 5-15P cord, and a CEE 7/7 EU cord.

Is Bitcoin mining with the Thor X1 profitable?

Profitability changes with Bitcoin price, network difficulty, pool terms, uptime, electricity cost, and selected power mode. CryptoCloaks does not promise a fixed return or a block result.

The post Hammer Miner Thor X1 | 3.2 TH/s Home Bitcoin Miner appeared first on CryptoCloaks.

GekkoScience KBox Bitcoin Miner combines 22 TH/s home-mining performance, an integrated power supply, wired and wireless networking, a live OLED display, and adjustable RGB lighting in one enclosed machine.

GekkoScience KBox Bitcoin Miner: 22 TH/s at home

The KBox takes the pieces that normally spread across a home-mining desk and puts them into one finished enclosure. There is no external controller, loose power brick, exposed hashboard, or separate network device to assemble. Connect power, join WiFi or Ethernet, open the browser-based dashboard, enter your pool information, and mine Bitcoin.

Inside are 18 BM1370 ASIC chips, an integrated 93%-efficient Mean Well power supply, a Linux mining controller, speed-controlled fans, active safety monitoring, a live stats display, and RGB lighting with 28 built-in modes. The fully enclosed steel-and-aluminum body is designed for a home, office, workshop, or dedicated Bitcoin room instead of an industrial mining facility.

For manufacturer background and other American-built mining hardware, visit GekkoScience.

Why the KBox is different

• Real home-mining hashrate: up to 22 TH/s from a desktop-sized enclosure.
• One-box setup: power supply, controller, networking, screen, cooling, and lighting are integrated.
• Three power levels: choose a quieter low-power profile, balanced medium mode, or full high mode.
• Quiet enough for occupied rooms: approximately 38 dB on low and 47 dB on high.
• Ethernet and dual-band WiFi: use a wired connection or 2.4GHz/5GHz wireless networking.
• Useful heat: turn the electrical input into roughly 607–1,099 BTU/hr of room heat while mining Bitcoin.
• Built-in visibility: see hashrate, temperature, power, pool status, fan speed, network information, and more without opening another device.
• Designed and built in America: assembled in the USA by GekkoScience.

KBox power modes, hashrate, heat, and noise

The KBox can be tuned for the room instead of forcing one fixed operating point. The figures below are practical preset targets; actual results vary with firmware, ambient temperature, chip quality, network configuration, and user tuning.

Nearly all miner power becomes room heat. BTU/hr values are watt-to-heat conversions, not an additional heater rating. GekkoScience also documents tuning headroom up to roughly 23 TH/s, 330W operation, and efficiency as low as approximately 13 J/TH under suitable tuning.

Integrated OLED Bitcoin mining display

The front display automatically rotates through useful live information, allowing the KBox to work as both a miner and a visible Bitcoin dashboard. Depending on firmware and selected display settings, it can show:

• Current hashrate and operating mode
• ASIC temperature and fan speed
• Power draw and efficiency
• Pool connection and share information
• Best share and blocks found
• Network SSID, signal strength, and local IP address
• Live Bitcoin price
• Bitcoin halving countdown

28 customizable RGB lighting modes

The KBox is meant to look good on a desk instead of hiding in a server closet. Its front RGB lighting includes 28 built-in effects with adjustable color, brightness, and animation speed. Choose a subtle ember glow, match the room, react to local weather, or let the front panel run a full animated light show.

Browser-based KBox dashboard

No separate computer is required after setup. The integrated Linux controller serves a local web interface where you can configure Bitcoin mining pools, view charts, select power presets, monitor hardware, tune performance, and control the RGB system.

Advanced users can adjust hashrate, efficiency, heat output, fan behavior, and lighting without rebuilding the miner around third-party controllers.

Built-in safety systems

The enclosed KBox includes several layers of protection intended for home operation:

• Active fan monitoring: hashing stops if either cooling fan stops.
• Double fuse protection: independent protection on the AC power supply and hashboard DC bus.
• Software thermal limits: ASIC temperature is actively monitored.
• Hardware regulator protection: the primary voltage-regulation system has its own thermal limits.
• Protected front grille: the 7mm hexagonal face grid restricts finger access while preserving airflow.
• Fully enclosed electronics: no exposed controller, hashboard, or loose desktop power brick.

As with any miner or space heater, keep the air intake and exhaust clear, place the KBox on a stable nonflammable surface, and do not enclose it in a cabinet without engineered ventilation.

GekkoScience KBox specifications

KBox vs smaller and larger home Bitcoin miners

The KBox sits in the middle of the home-mining range. It delivers roughly 3.7 times the hashrate of a 6 TH/s compact miner while staying far below the power draw of a 90 TH/s full-room heater miner.

• Choose the KBox when you want a polished all-in-one 22 TH/s desktop miner with Ethernet, dual-band WiFi, RGB lighting, and an integrated PSU.
• Choose the Canaan Avalon Nano 3S when lower price and lower power draw matter more than maximum desktop hashrate.
• Choose the Hammer Miner BC04 for a compact open-frame 6 TH/s home-mining setup with WiFi and Ethernet.
• Choose the Hammer Miner BC08 when you want approximately 12 TH/s from a quieter midrange desktop miner.
• Choose the Canaan Avalon Q when 90 TH/s matters more than compact size or low household power draw.

GekkoScience KBox setup

1. Place the KBox on a stable surface with clear intake and exhaust space.
2. Connect the AC power cable and switch the integrated PSU on.
3. Connect Ethernet or join a 2.4GHz/5GHz WiFi network.
4. Open the KBox local web interface from a device on the same network.
5. Enter your Bitcoin pool or solo-pool information and worker details.
6. Select Low, Medium, or High mode and confirm normal temperatures and fan operation.
7. Choose an RGB program, brightness, and effect speed if desired.

GekkoScience KBox FAQ

How much hashrate does the GekkoScience KBox produce?

The standard high-power target is approximately 22 TH/s. GekkoScience documents tuning headroom up to roughly 23 TH/s under suitable conditions.

How much power does the KBox use?

Preset operation is approximately 178W on Low, 242W on Medium, and 322W on High. User tuning can push operation to about 330W.

How loud is the KBox Bitcoin miner?

Published operating figures are approximately 38 dB on Low, 42 dB on Medium, and 47 dB on High. Room acoustics, fan tuning, ambient temperature, and measurement distance affect the number you hear.

Does the KBox include the power supply?

Yes. A 93%-efficient Mean Well power supply is integrated into the enclosure. You do not need a separate desktop power brick or external controller.

Does the KBox support WiFi and Ethernet?

Yes. The KBox supports Ethernet plus both 2.4GHz and 5GHz WiFi.

Can the KBox be used as a Bitcoin mining heater?

Yes. Depending on the selected power mode, it releases roughly 607–1,099 BTU/hr of heat into the room while mining Bitcoin. It is useful supplemental heat, not a replacement for properly sized primary heating equipment.

Can I solo mine with the GekkoScience KBox?

Yes. The KBox is a SHA-256 Bitcoin miner and can be configured for compatible Bitcoin mining pools or solo-pool infrastructure. Finding a block is probabilistic and never guaranteed.

Is Bitcoin mining with the KBox profitable?

Profitability changes with Bitcoin price, network difficulty, pool terms, uptime, selected tune, and your electricity rate. CryptoCloaks does not promise a fixed return or block result.

What RGB effects does the KBox include?

The onboard controller includes 28 lighting modes with user-adjustable colors, speed, and brightness. Examples include Embers, Woodstove, Rainbow, Breathe, weather-matching, and other animated effects.

What does the KBox screen display?

The front screen can rotate through hashrate, power, efficiency, temperature, fan speed, pool status, shares, network information, local IP, Bitcoin price, and halving countdown data.

What ASIC chips are in the KBox?

The KBox uses 18 BM1370 SHA-256 ASIC chips.

Where is the GekkoScience KBox made?

The KBox is designed and assembled in the United States.

Does the KBox have the hidden Doom Easter egg?

Yes. On supported firmware, open Settings and click the GekkoScience logo five times. Use the arrow keys to move and Control to shoot.

The post GekkoScience KBox 22 TH/s All-In-One Bitcoin Miner appeared first on CryptoCloaks.

The BC01 is the accessible Hammer Miner entry point: 1.5 TH/s in a tiny, quiet, low-power miner that makes Bitcoin mining easy to learn from a desk, office, or workshop.

In stock and shipping from Colorado.

Why CryptoCloaks is listing the Hammer Miner BC01

Home Bitcoin mining is moving fast, and the Hammer Miner line hits the exact lane we care about: compact gear, real SHA-256 mining, sane power draw, and hardware that fits on a desk instead of taking over the garage.

This page is built to give buyers the details that matter before ordering: hashrate, wattage, noise, shipping timing, included power, and where this miner fits in a home mining stack.

Key benefits

• 1.5 TH/s SHA-256 Bitcoin mining performance
• 23W max listed power draw
• 16 J/TH listed efficiency
• 38dB quiet desktop operation
• WiFi 2.4GHz connectivity
• Good fit for learning, testing, and low-power home mining

Specs

Best fit

• Home Bitcoin miners
• Desk or workshop mining setups
• Learning SHA-256 mining without industrial hardware
• Solo mining experiments
• Low-noise Bitcoin mining setups

Pre-order notes

This is a pre-order product. The source timeframe is included above so buyers know the expected shipping and availability window before checkout.

Need a different home miner? Compare this with the Hammer Miner BC04 or browse all CryptoCloaks Home Miners.

Frequently asked questions

Is the Hammer Miner BC01 good for learning Bitcoin mining?

Yes. The BC01 is built as a low-power home Bitcoin miner for learning, experimentation, and everyday desktop use.

When does the BC01 pre-order ship?

The source pre-order timeframe lists Shipping Date: June 17th, 2026 and Available on July 15, 2026.

How much power does the BC01 use?

The listed max power draw is 23W.

Does the BC01 use WiFi?

Yes. The BC01 listing includes WiFi 2.4GHz connectivity.

The post Hammer Miner BC01 | 1.5 TH/s Home Bitcoin Miner appeared first on CryptoCloaks.

The BC08 is the serious desktop option: 12 TH/s of SHA-256 Bitcoin mining at a 210W max draw, built for miners who want meaningful hashrate in a home or shop setup.

In stock and ready to ship from CryptoCloaks.

Why CryptoCloaks is listing the Hammer Miner BC08

Home Bitcoin mining is moving fast, and the Hammer Miner line hits the exact lane we care about: compact gear, real SHA-256 mining, sane power draw, and hardware that fits on a desk instead of taking over the garage.

This page is built to give buyers the details that matter before you buy: hashrate, wattage, noise, shipping status, included power, and where this miner fits in a home mining stack.

Key benefits

• 12 TH/s SHA-256 Bitcoin mining performance
• 210W max power draw
• 17.5 J/TH listed efficiency
• 38dB quiet operation for desktop placement
• SOLO, PPLNS, and PPS mining modes
• 12V power system with included PSU

Specs

Best fit

• Home Bitcoin miners
• Desk or workshop mining setups
• Learning SHA-256 mining without industrial hardware
• Solo mining experiments
• Low-noise Bitcoin mining setups

Shipping

This miner is in stock and ready to ship from CryptoCloaks. Orders move into fulfillment after payment is confirmed.

Need a different home miner? Compare this with the Hammer Miner BC04 or browse all CryptoCloaks Home Miners.

Frequently asked questions

Is the Hammer Miner BC08 good for home Bitcoin mining?

Yes. It is designed as a quiet desktop Bitcoin miner with 12 TH/s hashrate, 210W listed max draw, and 38dB operation.

When will the Hammer Miner BC08 ship?

The Hammer Miner BC08 is in stock and ready to ship from CryptoCloaks.

What mining algorithm does the BC08 use?

The BC08 mines SHA-256, the algorithm used by Bitcoin.

Does the BC08 include a power supply?

Yes. The listing specs state that a 12V/20A adapter is included.

The post Hammer Miner BC08 | 12 TH/s Desktop Bitcoin Miner appeared first on CryptoCloaks.

Table of Contents

Hammer Miner BC04 6 TH/s Home Bitcoin Miner

The Hammer Miner BC04 is built for the home Bitcoin miner who wants a real ASIC on the desk, not an industrial wind tunnel in the house. It targets around 6 TH/s of SHA-256 Bitcoin mining performance at about 110W, with an OLED stats screen, quiet cooling, and both WiFi and Ethernet onboard.

This is the kind of miner that makes sense for a shelf, office, workshop, garage bench, or apartment setup. Plug it in, connect it to your network, point it at your mining pool, and start stacking sats from home.

The BC04 matters because it sits in the sweet spot between tiny learning miners and big noisy farm hardware. You get enough hashrate to make the miner feel real, but the power draw stays low enough that normal home miners can actually live with it.

Why CryptoCloaks likes the BC04

• Real Bitcoin hashrate: about 6 TH/s SHA-256 performance in a compact desktop unit.
• Low power draw: roughly 110W stock operation, with tuned profiles reported around 120-125W.
• Home-friendly cooling: designed for quieter daily use compared with full-size industrial ASICs.
• Simple network setup: use 2.4GHz WiFi or RJ45 Ethernet.
• OLED stats screen: see miner status without digging through a dashboard every time.
• PSU included: comes with the power supply and cable shown in the product photos.

Hammer Miner BC04 specs

Optional CryptoCloaks color upgrade

The BC04 already includes the manufacturer-supplied standard stand. For a personalized setup, add the CryptoCloaks custom-color BC04 case and angled stand set for $12. Choose separate case and stand colors. This is an optional cosmetic and positioning upgrade, not a required accessory.

Good fit for

• Home Bitcoin mining
• Desk, garage, shelf, and office mining setups
• Apartment-friendly low-power mining
• Learning how ASIC mining and mining pools work
• Bitcoiners who want a compact miner instead of a warehouse machine

Setup Instructions

Compare with other home miners

If you want a quiet compact ASIC, this BC04 belongs in the same home mining lane as the Canaan Avalon Nano 3S and the rest of our Home Miners lineup. The point is simple: run a real Bitcoin miner at home without industrial noise or a giant power bill.

The Nano 3S is the heater-style favorite. The BC04 is the desk-friendly ASIC lane. Both are for people who want Bitcoin mining in a real house instead of a warehouse.

Want the broader home-mining setup angle? Read our home Bitcoin mining heater and home miner setup guide for airflow, heat, and room-planning basics.

Official Hammer Miner resources

For deeper technical digging, Hammer Miner maintains public BC04 firmware/UI repositories on GitHub: HammerMiner BC04-APP and HammerMiner BC04-WWW. We link those because buyers should be able to find the official project resources, not just another thin reseller page.

Need the deeper buyer breakdown? Read the full Hammer Miner BC04 review for home Bitcoin miners.

Hammer Miner BC04 FAQ

Can the Hammer Miner BC04 mine Bitcoin?

Yes. The Hammer Miner BC04 mines SHA-256 and is intended for Bitcoin mining.

How much hashrate does the Hammer Miner BC04 make?

The BC04 is listed around 6 TH/s, with tuned profiles reported up to about 6.5 TH/s depending on the unit and settings.

How much power does the Hammer Miner BC04 use?

Stock operation is around 110W. Tuned profiles are reported around 120-125W.

Does the BC04 support WiFi?

Yes. It supports 2.4GHz WiFi and RJ45 Ethernet.

Is this a good beginner Bitcoin miner?

Yes. It is a practical beginner-friendly ASIC because it is compact, low power, network-ready, and easier to live with than full-size industrial miners.

Does the Hammer Miner BC04 include a power supply?

Yes. The product photos and source listing show the BC04 shipping with the PSU and power cable.

Is the Hammer Miner BC04 quiet enough for a desk?

It is built for quiet desktop mining compared with industrial ASICs. Noise still depends on room temperature, firmware profile, airflow, and tuning, but this is a home-miner design, not a rack miner pretending to be friendly.

The post Hammer Miner BC04 | 6 TH/s Home Bitcoin Miner appeared first on CryptoCloaks.

The post Canaan Avalon Nano 3S Dual Cooler Box Bundle | 12 TH/s Bitcoin Mining Heater appeared first on CryptoCloaks.

The post Canaan Avalon Q 90TH Bitcoin Home Mining Space Heater – US PLUG appeared first on CryptoCloaks.

Table of Contents

• What Is the Canaan Avalon Mini 3?
• Specs
• The Space Heater Angle
• Who It’s For
• How It Compares
• Setup & Connectivity
• Why Buy from CryptoCloaks
• FAQ

Note: Gift cards are not accepted on miner purchases. Sorry in advance.

What Is the Canaan Avalon Mini 3?

The Canaan Avalon Mini 3 is the best mid-power Bitcoin home miner on the market right now. It delivers 37.5 TH/s of SHA-256 hashrate at just 800 watts — making it the sweet spot between the desktop-class BitAxe and a full industrial ASIC. It’s designed from the ground up for home use: low noise, built-in Wi-Fi, standard 110V–240V power, and a form factor that fits on a shelf.

It also heats your room. That’s not a marketing angle — at 800W of continuous power, the Canaan Avalon Mini 3 outputs real heat. Run it in a bedroom or office in winter, and your heating bill offsets part of your electricity cost. You’re not just mining Bitcoin — you’re replacing your space heater with something that stacks sats while it works.

Specs

For a deeper look at how the Canaan Avalon Mini 3 performs in real-world conditions, Hashrate Index has a thorough review. For up-to-date profitability calculations based on your electricity rate, NiceHash’s profitability calculator is the most accurate tool available.

The Space Heater Angle

Here’s the honest math: at $0.12–$0.16/kWh, the Canaan Avalon Mini 3 may not be printing profit on electricity alone right now — but it’s not meant to be evaluated that way.

If you’re heating a room anyway, you’re spending that electricity regardless. The Canaan Avalon Mini 3 replaces your dumb space heater with one that stacks Bitcoin 24/7. The heating is free. The mining is a bonus. That’s the play.

• 800W = meaningful room heat in a bedroom, office, or garage
• 33–55 dB noise level — quieter than most window AC units
• Works on standard US household outlets (110V)
• No special electrical work required

In winter months especially, the Canaan Avalon Mini 3 is one of the most rational home mining decisions you can make.

Who It’s For

• Home miners who want more hashrate than a BitAxe but don’t want a full industrial ASIC in their living room
• Space heater replacers — anyone already paying for heat who wants to stack sats while they do it
• Solo mining lottery players — 37.5 TH/s is real odds on CKPool. Not BitAxe odds. Actually meaningful.
• Citadel builders — people stacking infrastructure one machine at a time
• Gift buyers — the best Bitcoin gift you can give someone who already has everything

How It Compares

The Canaan Avalon Mini 3 sits right in the middle of the lineup — more hash than a desktop machine, far quieter and cheaper than a full-size ASIC. It’s the entry point for serious home miners who want real numbers.

Setup & Connectivity

The Canaan Avalon Mini 3 is designed for non-technical home users. Setup takes under 10 minutes:

1. Plug into standard outlet (110V–240V, no special wiring)
2. Connect via Wi-Fi or Ethernet to your home network
3. Open the web dashboard (IP address shown on device)
4. Enter your mining pool credentials (CKPool, Braiins, Ocean, or any SHA-256 pool)
5. Start hashing

CryptoCloaks recommends CKPool for solo mining — no registration required, and you keep 100% of the block reward if you find one. At 37.5 TH/s, your odds are real.

Why Buy from CryptoCloaks

• In stock, ships from Colorado — no 6-week wait from overseas distributors
• Bitcoin accepted — always. Pay in sats.
• Bitcoiners selling to Bitcoiners — we run these machines ourselves. We know what you’re buying.
• Accessories available — exhaust shrouds, fan adapters, and space heater mods to get the most out of your miner
• US-based support — real humans, fast replies

FAQ

Q: Does the Canaan Avalon Mini 3 work on a standard US outlet?
A: Yes. It runs on 110V–240V and doesn’t require any special electrical setup. Standard household outlet.

Q: How loud is it?
A: 33–55 dB depending on load. For reference, a normal conversation is ~60 dB. The Mini 3 is quieter than most window AC units. Bedroom-friendly.

Q: Is it profitable?
A: Depends on your electricity rate. At under $0.10/kWh it’s profitable on mining alone. At higher rates, treat it as a space heater that mines — the heating offsets your electricity cost, and the mining is on top. Use NiceHash’s calculator for your specific numbers.

Q: Can I solo mine with it?
A: Yes. Point it at CKPool for solo mining. At 37.5 TH/s you have real odds — not BitAxe lottery odds, but meaningful chances of finding a block. Expected time varies with network difficulty.

Q: Can I use it as my main space heater?
A: It outputs 800W of heat continuously. That’s solid for a bedroom, home office, or small room. Not a whole-house solution, but genuinely effective for a single room.

Q: Do you accept gift cards?
A: No — gift cards are not accepted on miner purchases.

Q: Do you accept Bitcoin?
A: Always.

The post Canaan Avalon Mini 3 37.5TH Bitcoin Home Mining Space Heater appeared first on CryptoCloaks.

It still behaves like an always-on miner: expect audible airflow, warm exhaust, and mining results that change with network difficulty, pool terms, fees, uptime, and Bitcoin price. We do not promise a fixed daily payout, profit, or payback date.

Published Canaan Avalon Nano 3S specifications

These are published specifications, not CryptoCloaks shop measurements. Actual wall power, sound, fan behavior, and hashrate can vary with environment, configuration, and workload.

Power, operating cost, and heat

At the published 140W maximum, continuous operation uses up to 3.36 kWh per day or 100.8 kWh over 30 days. Your actual bill depends on your electricity rate and operating time.

Nearly all electricity used by a miner ends up as heat in the room. At 140W, the Nano 3S provides roughly 478 BTU/h of supplemental warmth. That can be useful near a desk or in a small cool area, but it is not a replacement for a full-size room heater and the heat is not free.

Power-connection safety

Setup expectations

Before ordering, plan for:

1. The included PSU and power hardware. The purchase selector currently covers miner color only, so contact CryptoCloaks before ordering if you need a specific regional plug.
2. A stable network connection and a compatible Bitcoin mining pool or solo-mining endpoint.
3. A Bitcoin address you control for payouts.
4. Open space around the intake and exhaust.
5. A first-day check of the power connection, reported hashrate, fan behavior, and temperature.
6. A room where roughly 140W of continuous heat and audible airflow are acceptable.

Pool mining provides smaller, steadier credited work than solo mining. Solo mining is lottery-like and does not provide a predictable return. Neither mode supports a fixed earnings or payback promise.

Who should buy the Nano 3S?

It makes sense if you want:

• A compact first ASIC for learning home Bitcoin mining.
• 6 TH/s without the electrical and airflow project of a full-size miner.
• A pool or solo-mining setup with the PSU included.
• Supplemental warmth from hardware that is also hashing.

Skip it if you need:

• Silent operation.
• Predictable profit or a guaranteed payback date.
• Enough heat to replace a full-size room heater.
• An industrial-scale hashrate-per-dollar setup.

For a deeper buyer breakdown, read our source-backed Canaan Nano 3S specification review.

Nano 3S accessories

Canaan Avalon Nano 3S FAQ

What hashrate and power does the Nano 3S use?

Canaan publishes 6 TH/s and 140W maximum. That works out to about 23.3 W/TH using the published figures.

Is it silent?

No. Canaan lists a 33–40 dB range. Placement, room temperature, fan speed, and surrounding surfaces can change how it sounds in your space.

Can it run on a standard US outlet?

The current offer includes a PSU, and Canaan lists US and EU adapter variants. This product’s purchase selector currently covers miner color only. Contact CryptoCloaks before ordering if you need a specific regional plug, and use the bundled power hardware.

Is the Nano 3S profitable?

There is no fixed answer. Mining results change with network difficulty, pool terms, fees, uptime, Bitcoin price, and your electricity rate. Use current inputs and treat any earnings estimate as temporary, not guaranteed.

Does it replace a space heater?

No. Its roughly 140W of heat can provide supplemental warmth near a desk or in a small cool area, but it is far below the output of a typical full-size room heater.

Can it pool mine or solo mine?

Yes. It can send SHA-256 work to a compatible pool or solo-mining endpoint. Pool mining provides steadier credited work; solo mining is lottery-like.

Can it mine other coins?

It is SHA-256 hardware sold here for Bitcoin mining.

The post Canaan Avalon Nano 3S — 6 TH/s Home Bitcoin Miner appeared first on CryptoCloaks.