The Bitaxe 6AMP Power Supply is a simple spare or replacement power adapter for compatible Bitaxe home Bitcoin miners. If your Bitaxe power brick is missing, tired, damaged, or you want a backup on the bench, this is the practical part to keep around.

This adapter is rated for 5V / 6A / 30W, which is the common power lane used by many Bitaxe-style small ASIC mining builds. It is meant for compatible miners that use a 5V DC barrel-style input.

Why keep a spare Bitaxe power supply?

• Easy replacement: swap out a missing or failing Bitaxe power brick.
• Bench-ready spare: handy if you test, tune, move, or travel with small miners.
• Home mining part: small support gear that keeps a Bitaxe setup online.
• Correct output lane: 5V / 6A / 30W for compatible 5V Bitaxe miners.

Specs

Compatibility notes

This is intended for compatible Bitaxe miners that require 5V power. Many Bitaxe Gamma, Supra, Ultra, and similar builds use this 5V 6A power lane, but you should still check your miner before ordering. Match the voltage, current requirement, and connector style on your specific unit.

Do not use this on miners that require 12V, USB-C PD-only input, XT30 input, or a different voltage/current setup. Wrong power supplies can damage hardware.

Good fit for

• Bitaxe power supply replacement
• Bitaxe spare power adapter
• Home Bitcoin mining repair kits
• Small ASIC bench testing
• Keeping a backup power brick in the shop

FAQ

Is this a Bitaxe replacement power supply?

Yes. This is a replacement or spare power supply for compatible Bitaxe miners that use 5V / 6A power.

What output is this Bitaxe power adapter?

It is rated at 5V / 6A / 30W.

Will this work with every Bitaxe?

No. Check your exact miner input first. This is for compatible 5V Bitaxe setups, not every miner or every power connector.

Is this for Bitcoin mining?

Yes. It is a support part for compatible Bitaxe home Bitcoin miners.

The post Bitaxe 6AMP Power Supply appeared first on CryptoCloaks.

Table of Contents

Hammer Miner BC04 Stand for a cleaner home Bitcoin mining setup

The Hammer Miner BC04 Stand is a 3D printed desktop mount built for the Hammer Miner BC04. It holds the miner at a clean working angle so the fan face, board, OLED screen, power side, and cable routing stay easier to see and reach on a desk, shelf, workbench, or home mining rack.

If you already have the BC04 and just want the printed stand setup, this listing keeps it simple. Pick your colors, choose any combination at the same price, and give the miner a stable spot instead of leaving it loose on the desk.

Case Color and Stand Color options

Choose a Case Color and a Stand Color. Any color combo is $12.00.

• Case Color: choose the printed BC04 frame/case color.
• Stand Color: choose the angled base/stand color.
• No price games: standard colors, galaxy colors, carbon fiber, and fade colors stay the same price.

What is included

• 1x CryptoCloaks Hammer Miner BC04 Stand/frame set in your selected Case Color and Stand Color

What is not included

• Hammer Miner BC04 miner
• Fan, PSU, power cable, USB/network cables, or any mining hardware
• Pool setup, firmware setup, or mining support beyond the printed accessory

Compatibility

This stand is made for the Hammer Miner BC04. It is not a universal ASIC stand, not a BC01 stand, and not a BC08 stand. For the miner itself, see the Hammer Miner BC04 product page. For other printed mining accessories, browse Home Mining Shrouds Etc.

FAQ

Does this include the Hammer Miner BC04?

No. This product is the 3D printed BC04 stand/frame set only. The miner shown in photos is for fit and display reference.

Can I choose both colors?

Yes. Choose the Case Color and Stand Color at checkout. The price stays $12.00 for any color combination.

Does this fit the BC01 or BC08?

No. This listing is for the Hammer Miner BC04. Use a model-specific stand for other Hammer Miner models.

Where should I use it?

It is meant for a desk, shelf, workbench, garage bench, or home mining area where you want the BC04 upright, stable, and easier to access.

The post Hammer Miner BC04 Stand appeared first on CryptoCloaks.

The BC01 is the accessible Hammer Miner entry point: 1.5 TH/s in a tiny, quiet, low-power miner that makes Bitcoin mining easy to learn from a desk, office, or workshop.

Pre-order window: 5 slots available. Shipping Date: June 17th, 2026. Available on July 15, 2026.

Why CryptoCloaks is listing the Hammer Miner BC01

Home Bitcoin mining is moving fast, and the Hammer Miner line hits the exact lane we care about: compact gear, real SHA-256 mining, sane power draw, and hardware that fits on a desk instead of taking over the garage.

This page is built to give buyers the details that matter before a pre-order: hashrate, wattage, noise, shipping timing, included power, and where this miner fits in a home mining stack.

Key benefits

• 1.5 TH/s SHA-256 Bitcoin mining performance
• 23W max listed power draw
• 16 J/TH listed efficiency
• 38dB quiet desktop operation
• WiFi 2.4GHz connectivity
• Good fit for learning, testing, and low-power home mining

Specs

Best fit

• Home Bitcoin miners
• Desk or workshop mining setups
• Learning SHA-256 mining without industrial hardware
• Solo mining experiments
• Low-noise Bitcoin mining setups

Pre-order notes

This is a pre-order product. The source timeframe is included above so buyers know the expected shipping and availability window before checkout.

Need a different home miner? Compare this with the Hammer Miner BC04 or browse all CryptoCloaks Home Miners.

Frequently asked questions

Is the Hammer Miner BC01 good for learning Bitcoin mining?

Yes. The BC01 is built as a low-power home Bitcoin miner for learning, experimentation, and everyday desktop use.

When does the BC01 pre-order ship?

The source pre-order timeframe lists Shipping Date: June 17th, 2026 and Available on July 15, 2026.

How much power does the BC01 use?

The listed max power draw is 23W.

Does the BC01 use WiFi?

Yes. The BC01 listing includes WiFi 2.4GHz connectivity.

The post Hammer Miner BC01 | 1.5 TH/s Home Bitcoin Miner appeared first on CryptoCloaks.

The BC08 is the serious desktop option: 12 TH/s of SHA-256 Bitcoin mining at a 210W max draw, built for miners who want meaningful hashrate in a home or shop setup.

Pre-order window: 5 slots available. Shipping Date: Aug 1st. Available on August 1, 2026.

Why CryptoCloaks is listing the Hammer Miner BC08

Home Bitcoin mining is moving fast, and the Hammer Miner line hits the exact lane we care about: compact gear, real SHA-256 mining, sane power draw, and hardware that fits on a desk instead of taking over the garage.

This page is built to give buyers the details that matter before a pre-order: hashrate, wattage, noise, shipping timing, included power, and where this miner fits in a home mining stack.

Key benefits

• 12 TH/s SHA-256 Bitcoin mining performance
• 210W max power draw
• 17.5 J/TH listed efficiency
• 38dB quiet operation for desktop placement
• SOLO, PPLNS, and PPS mining modes
• 12V power system with included PSU

Specs

Best fit

• Home Bitcoin miners
• Desk or workshop mining setups
• Learning SHA-256 mining without industrial hardware
• Solo mining experiments
• Low-noise Bitcoin mining setups

Pre-order notes

This is a pre-order product. The source timeframe is included above so buyers know the expected shipping and availability window before checkout.

Need a different home miner? Compare this with the Hammer Miner BC04 or browse all CryptoCloaks Home Miners.

Frequently asked questions

Is the Hammer Miner BC08 good for home Bitcoin mining?

Yes. It is designed as a quiet desktop Bitcoin miner with 12 TH/s hashrate, 210W listed max draw, and 38dB operation.

When does the BC08 pre-order ship?

The source pre-order timeframe lists Shipping Date: Aug 1st and Available on August 1, 2026.

What mining algorithm does the BC08 use?

The BC08 mines SHA-256, the algorithm used by Bitcoin.

Does the BC08 include a power supply?

Yes. The listing specs state that a 12V/20A adapter is included.

The post Hammer Miner BC08 | 12 TH/s Desktop Bitcoin Miner appeared first on CryptoCloaks.

Table of Contents

Hammer Miner BC04 6 TH/s Home Bitcoin Miner

The Hammer Miner BC04 is built for the home Bitcoin miner who wants a real ASIC on the desk, not an industrial wind tunnel in the house. It targets around 6 TH/s of SHA-256 Bitcoin mining performance at about 110W, with an OLED stats screen, quiet cooling, and both WiFi and Ethernet onboard.

This is the kind of miner that makes sense for a shelf, office, workshop, garage bench, or apartment setup. Plug it in, connect it to your network, point it at your mining pool, and start stacking sats from home.

The BC04 matters because it sits in the sweet spot between tiny learning miners and big noisy farm hardware. You get enough hashrate to make the miner feel real, but the power draw stays low enough that normal home miners can actually live with it.

Why CryptoCloaks likes the BC04

• Real Bitcoin hashrate: about 6 TH/s SHA-256 performance in a compact desktop unit.
• Low power draw: roughly 110W stock operation, with tuned profiles reported around 120-125W.
• Home-friendly cooling: designed for quieter daily use compared with full-size industrial ASICs.
• Simple network setup: use 2.4GHz WiFi or RJ45 Ethernet.
• OLED stats screen: see miner status without digging through a dashboard every time.
• PSU included: comes with the power supply and cable shown in the product photos.

Hammer Miner BC04 specs

Good fit for

• Home Bitcoin mining
• Desk, garage, shelf, and office mining setups
• Apartment-friendly low-power mining
• Learning how ASIC mining and mining pools work
• Bitcoiners who want a compact miner instead of a warehouse machine

Setup Instructions

Compare with other home miners

If you want a quiet compact ASIC, this BC04 belongs in the same home mining lane as the Canaan Avalon Nano 3S and the rest of our Home Miners lineup. The point is simple: run a real Bitcoin miner at home without industrial noise or a giant power bill.

The Nano 3S is the heater-style favorite. The BC04 is the desk-friendly ASIC lane. Both are for people who want Bitcoin mining in a real house instead of a warehouse.

Want the broader home-mining setup angle? Read our home Bitcoin mining heater and home miner setup guide for airflow, heat, and room-planning basics.

Official Hammer Miner resources

For deeper technical digging, Hammer Miner maintains public BC04 firmware/UI repositories on GitHub: HammerMiner BC04-APP and HammerMiner BC04-WWW. We link those because buyers should be able to find the official project resources, not just another thin reseller page.

Need the deeper buyer breakdown? Read the full Hammer Miner BC04 review for home Bitcoin miners.

Hammer Miner BC04 FAQ

Can the Hammer Miner BC04 mine Bitcoin?

Yes. The Hammer Miner BC04 mines SHA-256 and is intended for Bitcoin mining.

How much hashrate does the Hammer Miner BC04 make?

The BC04 is listed around 6 TH/s, with tuned profiles reported up to about 6.5 TH/s depending on the unit and settings.

How much power does the Hammer Miner BC04 use?

Stock operation is around 110W. Tuned profiles are reported around 120-125W.

Does the BC04 support WiFi?

Yes. It supports 2.4GHz WiFi and RJ45 Ethernet.

Is this a good beginner Bitcoin miner?

Yes. It is a practical beginner-friendly ASIC because it is compact, low power, network-ready, and easier to live with than full-size industrial miners.

Does the Hammer Miner BC04 include a power supply?

Yes. The product photos and source listing show the BC04 shipping with the PSU and power cable.

Is the Hammer Miner BC04 quiet enough for a desk?

It is built for quiet desktop mining compared with industrial ASICs. Noise still depends on room temperature, firmware profile, airflow, and tuning, but this is a home-miner design, not a rack miner pretending to be friendly.

The post Hammer Miner BC04 | 6 TH/s Home Bitcoin Miner appeared first on CryptoCloaks.

The post Canaan Avalon Nano 3S Dual Cooler Box Bundle | 12 TH/s Bitcoin Mining Heater appeared first on CryptoCloaks.

CryptoCloaks is developing a custom stand and case specifically for the Turbo Touch’s new form factor. We’ve been first with accessories for every major BitAxe release — this one’s no different.

Coming soon. Drop your email below to get notified when it’s live, or check back soon.

Made in Colorado on Bambu printers. Bitcoin accepted. 25+ color options.

The post BitAxe Turbo Touch Stand & Case | CryptoCloaks appeared first on CryptoCloaks.

The Dual Bitaxe Gamma Case – Mini PC Gaming Rig Edition turns your miners into a tiny desktop powerhouse that looks ready to run max settings… but instead it’s busy stacking sats. Built to house two Bitaxe Gamma units, this case gives your setup that sleek mini-gaming-PC aesthetic while keeping everything tidy and display-worthy.

Best part? You’re the builder here. With full color customization options, you can match your setup, your battle station, your brand, or your chaotic gamer personality. Clean, loud, stealthy, or neon — it’s your rig, your rules.

Why you’ll love it:
Holds two Bitaxe Gamma units in one compact case
Styled like a miniature gaming PC tower
Custom color options to match your setup or vibe
Keeps your desk looking intentional instead of “DIY lab experiment”
A guaranteed conversation starter for gamers, miners, and curious coworkers

Because if you’re going to mine at home, you might as well look like you’re winning. 🎯⚡

Other parts you’ll want:
– 2X – 60mm Fans (Noctua or others)
– Fan adapters if you don’t get Noctuas

The post Bitaxe Triton Dual Gamma Gaming Rig Case appeared first on CryptoCloaks.

The Canaan Nano 3 / Nano 3S Cooler Box turns a messy home-mining stack into a clean, serviceable Bitcoin mining setup. It is built for the regular Canaan Avalon Nano 3 and the Avalon Nano 3S, with 2-unit and 4-unit versions available. Instead of letting tiny miners sit flat on a desk, fight for air, and drag cables everywhere, this box gives each unit a proper stand, a shared airflow path, and cable routing that looks intentional.

This product is the cooler box only. Canaan miners are not included. Choose the 2-unit or 4-unit layout, then select whether you want fans, controller, and an exhaust shroud included. Base pricing starts at $50 for the 2-unit cooler box without fans or shroud. Fan and shroud options change the final price in the selector above.

Canaan Nano 3 cooler box and Canaan Nano 3S cooler box compatibility

The CryptoCloaks cooler box fits both generations Ricky keeps getting asked about: the regular Canaan Avalon Nano 3 and the Canaan Avalon Nano 3S. Canaan lists the Avalon Nano 3 at up to 4 TH/s with configurable power modes and the Avalon Nano 3S at 6 TH/s and 140W. Both are small enough for desks, shelves, garages, offices, and mining corners, but both get cleaner when they are mounted with airflow and wire management in mind.

What this ASIC miner stand fixes

• Airflow: gives the Nano 3 or Nano 3S stack a cleaner cooling path than loose miners sitting flat on a table.
• Wire management: routes power, network, fan, and controller cables instead of letting everything pile up behind the miners.
• Multi-unit layout: supports 2 or 4 Canaan Nano 3 or Nano 3S units in one organized cooler box.
• Optional exhaust control: add a 6 inch or 8 inch exhaust shroud when you want to push warm air away from the shelf or desk.
• Shop-built parts: printed by CryptoCloaks in Colorado for home miners who care what the setup looks like.

Available options

• 2-unit cooler box: best for a small desk, shelf, bedroom, or starter home-mining setup.
• 4-unit cooler box: best for stacking multiple Nano miners in a cleaner garage, office, or shop corner.
• Fans and controller: optional. Select yes if you want a ready cooling package, or select no if you already have your own Noctua-style fan plan.
• Exhaust shroud: optional 6 inch or 8 inch shroud, color matched to the case when selected.

Specs and fitment

• Fits: Canaan Avalon Nano 3 and Canaan Avalon Nano 3S
• Capacity: 2 miners or 4 miners depending on selected version
• Cooling: 140mm fan mount support with optional fan/controller bundle
• Shroud options: none, 6 inch, or 8 inch exhaust shroud
• Product type: 3D printed cooler box, dock, stand, and wire-management enclosure
• Made by: CryptoCloaks in Colorado

Why not use a basic Nano 3 dock?

A basic Canaan Nano 3 dock or Nano 3S stand mostly holds one miner upright. That is better than nothing, but it does not solve the full home-mining mess. This cooler box is made for the way people actually run small Bitcoin miners at home: multiple units, power bricks, fans, controllers, Ethernet or Wi-Fi, and a limited amount of desk or shelf space. The goal is simple: cooler miners, cleaner cables, and a setup that does not look like a science project collapsed behind your monitor.

Related CryptoCloaks Nano products

If you need the miner too, see the Canaan Avalon Nano 3S. If you want the complete miner-plus-cooler setup, see the Canaan Avalon Nano 3S Dual Cooler Box Bundle.

FAQ

Does this fit the regular Canaan Avalon Nano 3?

Yes. This cooler box fits the regular Canaan Avalon Nano 3 and the Canaan Avalon Nano 3S.

Are the Canaan miners included?

No. This product is the CryptoCloaks cooler box, dock, stand, and wire-management enclosure. Miners are sold separately unless you buy one of the complete bundle listings.

Should I choose the 2-unit or 4-unit version?

Choose 2-unit if you are running a small desk or shelf setup. Choose 4-unit if you already have multiple Nano miners or plan to expand the stack.

Do I need fans and a controller?

If you want the simplest cooling setup, choose the fan and controller option. If you already have your own fan plan, select the no-fans option and use your preferred 140mm fans.

What is the exhaust shroud for?

The exhaust shroud helps direct warm air away from the cooler box. It is useful when the miners sit near a wall, shelf, desk, or window vent path.

The post Canaan Nano 3 / Nano 3S Cooler Box | ASIC Miner Stand appeared first on CryptoCloaks.

The post GekkoAxe GT 2xBM1370 Solo Miner Custom Case appeared first on CryptoCloaks.