Blockstream Jade Plus mount for a cleaner Bitcoin setup

A hardware wallet works better when you know exactly where it is. This compact Jade Plus holder keeps the device in a repeatable spot instead of leaving it loose on a desk, buried in a drawer, or mixed into a pile of cables.

The mount is shaped for the newer Jade Plus form factor shown in the product photos. Blockstream lists the Jade Plus at 65 × 30 × 12 mm, with a 1.9-inch display, camera, USB-C, Bluetooth, and SD card or USB-drive support. The original Blockstream Jade uses a different enclosure. This listing is for Jade Plus only and is not compatible with the original Jade.

Why use a dedicated Jade Plus hardware wallet holder?

Choose Screw or Screwless mounting

Screw

Select Screw when you want visible mechanical fastening points. Choose screws and anchors that match the mounting surface, and check for wiring or plumbing before drilling.

Screwless

Select Screwless for an installation designed around suitable 3M mounting tape. Adhesive mounting works best on a clean, smooth, non-porous surface. Surface preparation, temperature, tape selection, and installation direction all affect the bond.

For overhead or against-gravity placement, use the screw-ready version when maximum mechanical retention matters. Do not install the mount where a release could drop the device onto a person, a hard floor, or another object.

Jade Plus Mount color options

The standard mount is black. Optional custom colors are available through the product add-on selector for an additional $3. Because every mount is 3D printed to order, normal layer lines and slight surface variation are part of the manufacturing process.

What is included?

• One CryptoCloaks Jade Plus Mount in the selected Screw or Screwless configuration
• Your selected custom color when purchased through the add-on field

Not included: Jade Plus hardware wallet, screws, wall anchors, tools, furniture, cables, Bitcoin, or any item not explicitly listed in the selected product configuration. The Jade Plus shown in the photos demonstrates fit only.

Jade Plus Mount specifications

About Jade Plus compatibility

This holder is designed for the Blockstream Jade Plus form factor. Blockstream lists the Jade Plus enclosure at 65 × 30 × 12 mm and offers reinforced-plastic and metal versions. Confirm that your device is a Jade Plus before ordering. Do not force an original Jade or another hardware wallet into the holder.

This CryptoCloaks mount is a physical organization accessory only. It does not generate, store, back up, recover, or secure Bitcoin keys, and it does not change the Jade Plus security model. Follow Blockstream’s official instructions for setup, firmware, signing, recovery, and device security.

Installation guide

1. Confirm that your device is the Jade Plus shown in this listing, not the original Jade.
2. Choose a dry location away from heat, moisture, direct sunlight, impact, and cable strain.
3. For the Screw version, use fasteners and anchors suitable for the mounting surface.
4. For the Screwless version, clean and dry a smooth mounting surface before applying suitable 3M mounting tape.
5. Install the empty mount first and verify that it is stable.
6. Insert the Jade Plus gently. Never force a device that does not match the Jade Plus form factor.
7. Recheck the installation periodically, especially after temperature changes or when adhesive is used.

Explore more Bitcoin hardware mounts

Browse the CryptoCloaks Docks & Mounts collection for other purpose-built Bitcoin hardware wallet holders, including the separate original Blockstream Jade Mount.

Jade Plus Mount FAQ

Which Blockstream device does this mount fit?

It is designed for the Blockstream Jade Plus form factor shown in the product photos.

Does it fit the original Blockstream Jade?

No. The original Jade uses a different enclosure. Use the separate original Blockstream Jade Mount instead.

Is a Jade Plus hardware wallet included?

No. This listing includes the 3D-printed mount only. The device shown in the photos demonstrates fit.

What is the difference between Screw and Screwless?

The Screw version provides mechanical fastening points. The Screwless version is designed for installation with suitable 3M mounting tape on a clean, smooth surface.

Can I mount it under a desk?

Yes, if the surface and mounting method can safely support the mount and device. The screw-ready version is the stronger choice for long-term against-gravity installation.

Can I install it on a wall or inside a cabinet?

Yes, on a suitable flat surface. Use the mounting method appropriate for the surface and installation direction.

What color is the standard mount?

The standard color is black. Optional custom colors are available for an additional $3.

Does this mount improve digital security?

No. It is a physical storage and organization accessory. It does not alter the Jade Plus keys, signing process, recovery, firmware, or security model.

Is this an official Blockstream product?

No. This is an independent CryptoCloaks accessory made for the Blockstream Jade Plus hardware wallet. CryptoCloaks is not affiliated with or endorsed by Blockstream.

Where is the Jade Plus Mount made?

It is 3D printed to order by CryptoCloaks.

The post Jade Plus Mount appeared first on CryptoCloaks.

Bitkey Mount for the second-generation Bitkey with screen

Keep your Bitkey hardware organized instead of leaving it loose on a desk, buried in a drawer, or mixed into a pile of cables. This compact holder is shaped around the second-generation, screen-equipped Bitkey hardware device and provides a repeatable storage location near your Bitcoin setup.

The pictured hardware is the newer Bitkey introduced in 2026 with an OLED touchscreen and fingerprint sensor. Its enclosure differs from the original screenless model. This mount fits the second-generation Bitkey with the screen shown in the product photos. It does not fit the first-generation screenless Bitkey.

Why use a dedicated Bitkey hardware wallet mount?

Choose Screw or Screwless mounting

Screw

Select Screw when you want a mount with mechanical fastening points. This is the stronger choice for wood, an appropriate anchored surface, or an installation where the mount will hold against gravity for long periods. Choose fasteners and anchors that match the mounting surface.

Screwless

Select Screwless for a clean installation using 3M tape rather than drilled fasteners. Adhesive mounting performs best on a clean, smooth, non-porous surface. Clean the surface first, press the mount firmly into place, and allow the adhesive to bond before loading the device. Adhesive performance depends on the surface, preparation, temperature, and installation.

Do not place the mount where a release could cause the hardware device to fall onto a person, a hard floor, or another object. The screw-ready option is recommended when maximum mechanical retention matters.

Bitkey Mount color and customization options

The standard mount is black. The product form also matches the customization setup used on the CryptoCloaks MK5 ColdCard Mount:

• Custom text: add up to 8 characters to the top of the mount for an additional $3.
• Custom mount color: choose an available custom color for an additional $3.
• Installation style: choose Screw or Screwless before adding the mount to your cart.

Because CryptoCloaks prints each mount to order, small layer lines and normal surface variation are part of the 3D-printing process.

What is included?

• One CryptoCloaks Bitkey Mount in the selected installation style
• Your selected custom text or custom color when purchased through the add-on fields

Not included: Bitkey hardware device, phone, Bitcoin, cables, tools, wall anchors, furniture, or any item not explicitly listed in the selected product configuration. The Bitkey shown in the photo demonstrates fit only.

Compatibility and fit

About second-generation Bitkey compatibility

This mount is shaped for the current screen-equipped Bitkey, introduced in 2026. Bitkey lists an OLED touchscreen display, biometric fingerprint sensor, NFC, USB-C charging, and a 66 mm x 60 mm x 13.6 mm enclosure. Read the manufacturer’s introduction to the new Bitkey for device details.

This CryptoCloaks mount is a physical storage and organization accessory only. It does not generate, store, back up, recover, or secure Bitcoin keys, and it does not change the security model of the Bitkey wallet. Follow Bitkey’s official instructions for setup, use, recovery, firmware, and account security.

Bitkey Mount vs leaving the device loose

Installation guide

1. Confirm that your hardware is the second-generation Bitkey with the screen shown in this listing.
2. Choose a location that keeps the device accessible without exposing it to heat, moisture, direct sunlight, impact, or cable strain.
3. For the Screw version, select fasteners and anchors suitable for the surface. Check for wiring and plumbing before drilling.
4. For the Screwless version, clean and dry a smooth mounting surface before applying the 3M tape.
5. Install the empty mount first and verify that it is stable.
6. Insert the Bitkey gently. Never force a device that does not match the pictured second-generation form factor.
7. Recheck the mount periodically, especially after temperature changes or if adhesive is used.

Explore more Bitcoin hardware mounts

Building a cleaner Bitcoin workstation? Browse the CryptoCloaks Docks & Mounts collection for other purpose-built hardware wallet holders and mounting accessories.

Bitkey Mount FAQ

Which Bitkey does this mount fit?

It is designed for the second-generation Bitkey with the screen shown in the product photos.

Does this fit the first-generation screenless Bitkey?

No. The original screenless Bitkey has a different enclosure. Order this mount only for the pictured second-generation screen-equipped device.

Is a Bitkey hardware wallet included?

No. This listing includes the 3D-printed mount only. The Bitkey device in the photo demonstrates fit and is not included.

What is the difference between Screw and Screwless?

The Screw option provides mechanical mounting points. The Screwless option is intended for installation with 3M tape on a suitable clean, smooth surface.

Can I install the Bitkey Mount under a desk?

Yes, if the chosen surface and mounting method can safely support the mount and device. For long-term overhead or against-gravity installation, the screw-ready option provides the strongest mechanical retention.

Can I mount it on a wall or inside a cabinet?

Yes, on a suitable flat surface. Use appropriate screws and anchors or properly applied 3M tape based on the surface and installation direction.

What color is the standard mount?

The standard mount is black. Optional custom colors are available through the product add-on selector for an additional $3.

Can I add text to the mount?

Yes. Optional custom text of up to 8 characters is available for an additional $3.

Is the custom color fee charged in addition to custom text?

Yes. Custom text and custom color are separate optional add-ons, each priced at $3.

Does this mount improve Bitkey’s digital security?

No. It is a physical organization accessory. It does not alter Bitkey’s keys, signing, recovery, fingerprint approval, firmware, or multisig security model.

Is this an official Bitkey product?

No. This is an independent CryptoCloaks accessory made for the second-generation screen-equipped Bitkey hardware device. CryptoCloaks is not affiliated with or endorsed by Block, Inc. or Bitkey.

Where is the Bitkey Mount made?

It is 3D printed to order by CryptoCloaks.

The post Bitkey Mount appeared first on CryptoCloaks.

The ColdCard Mk5 Dock is a 3D printed desktop stand built for bitcoiners who want a cleaner self-custody desk. Instead of laying your ColdCard loose on the table and chasing a cable every time you need to sign, this dock gives your Mk5 a dedicated home with a USB-C to USB-C cable built into the dock.

Set the dock near your computer, choose your printed color, and keep the connector ready. The exposed USB-C plug sits inside the stand so the ColdCard Mk5 can drop into place for a cleaner hardware wallet workflow.

Why this ColdCard Mk5 dock exists

A ColdCard Mk5 is a serious Bitcoin self-custody tool. The desk setup around it should be just as intentional. This dock keeps the wallet upright, easier to see, and easier to connect without adding another loose cable to the pile.

• Designed for ColdCard Mk5: shaped as a dedicated desktop dock/stand for the Mk5 form factor.
• Built-in USB-C to USB-C cable: the cable is part of the dock setup, with the connector positioned for easy plug-in.
• Clean signing station: keeps your hardware wallet upright, organized, and ready for Bitcoin transactions.
• 3D printed by CryptoCloaks: made in-house for real Bitcoin self-custody setups.
• Any color, same price: choose your dock color at checkout. Color does not change the $7.99 price.

What is included

• 1x CryptoCloaks ColdCard Mk5 Dock in your selected color
• 1x built-in USB-C to USB-C cable installed/routed with the dock

What is not included

• ColdCard Mk5 hardware wallet
• Computer, laptop, or other signing device

Compatibility

This dock is made for the ColdCard Mk5. It is built around a USB-C connection and is intended as a desktop hardware wallet stand for Bitcoin signing setups.

If you need a different holder, check the full Hard Wallet Mounts category for other CryptoCloaks hardware wallet mounts.

FAQ

Does this include a ColdCard Mk5?

No. This listing is for the 3D printed dock with built-in USB-C to USB-C cable only. The ColdCard hardware wallet is not included.

Does the dock include the USB-C cable?

Yes. This version has a USB-C to USB-C cable built into the dock setup.

Does color change the price?

No. Pick the color you want. Every color option is $7.99.

Is this a wall mount?

No. This is a desktop dock/stand for keeping your ColdCard Mk5 upright and easier to plug in near your computer.

Is this official Coinkite/Coldcard hardware?

No. This is a CryptoCloaks 3D printed dock designed for ColdCard Mk5 owners. ColdCard/Coinkite hardware wallet is not included.

The post ColdCard Mk5 Dock – USB-C Hardware Wallet Stand appeared first on CryptoCloaks.

The Trezor Safe 7 Dock is a 3D printed desktop stand built to hold your Trezor Safe 7 at a comfortable angle while making the USB-C connection easier to reach. Instead of laying the wallet flat, chasing the cable around your desk, or leaving it loose between signing sessions, this dock gives the device a simple home base.

Why this dock exists

The Trezor Safe 7 is a serious self-custody tool. The setup around it should feel just as intentional. This dock keeps the wallet upright, stable, and ready to connect to your computer using the USB-C cable that comes with the hardware wallet.

• Designed for Trezor Safe 7: shaped to hold the device nicely without a generic phone-stand fit.
• USB-C cable channel: routes the cable through the front of the dock for a cleaner plug-in setup.
• Desktop friendly: keeps the hardware wallet visible, organized, and easier to grab when it is time to sign.
• 3D printed by CryptoCloaks: made for Bitcoiners who care about their self-custody workspace.
• Color selectable: choose the dock color at checkout. Color does not change the price.

What is included

• 1x CryptoCloaks Trezor Safe 7 Dock in your selected color

What is not included

• Trezor Safe 7 hardware wallet
• USB-C cable

Compatibility

This dock is made for the Trezor Safe 7. It uses the USB-C cable that comes with the hardware wallet. If you need a different holder, check the full Hard Wallet Mounts category for other CryptoCloaks hardware wallet mounts.

FAQ

Does this include the Trezor Safe 7?

No. This listing is for the 3D printed dock only. The hardware wallet is shown for fit/reference and is not included.

Does it include a USB-C cable?

No. It is designed to use the USB-C cable that comes with the Trezor Safe 7.

Does color change the price?

No. Pick the color you want. The dock price stays the same.

Is this a wall mount?

No. This is a desktop dock/stand made to hold the Safe 7 upright near your computer.

The post Trezor Safe 7 Dock – USB-C Hardware Wallet Stand appeared first on CryptoCloaks.

Your ColdCard MK5 should not live loose in a drawer, sliding around your desk, or disappearing under a pile of cables. This CryptoCloaks ColdCard MK5 mount gives your Bitcoin hardware wallet a dedicated spot so it is organized, easy to reach, and ready when it is time to sign.

Printed by CryptoCloaks for bitcoiners who care about clean setups, this mount is a simple upgrade for a serious self-custody desk: low profile, practical, and built around the ColdCard MK5 form factor.

Table of Contents

• What Is the ColdCard MK5 Mount?
• Why a Dedicated MK5 Mount Matters
• ColdCard MK5 Mount Features
• Installation and Setup
• What It Fits
• Why CryptoCloaks
• FAQ

What Is the ColdCard MK5 Mount?

The CryptoCloaks ColdCard MK5 Mount is a 3D printed desk or wall mount designed to hold a ColdCard MK5 hardware wallet in a stable, repeatable place. It is made for people who actually use their ColdCard instead of treating self-custody gear like random junk in a drawer.

Use it near your signing workstation, on a shelf, in a cabinet, or anywhere you want your ColdCard MK5 to stay put without making your desk look like a fiat help desk exploded.

Why a Dedicated MK5 Mount Matters

• Keeps your ColdCard MK5 organized: no more hunting through drawers or desk clutter.
• Makes signing sessions cleaner: your device has a predictable home near your Bitcoin workstation.
• Protects the setup vibe: self-custody gear should look intentional, not tossed around.
• Simple, useful, no gimmicks: a practical mount for a practical Bitcoin tool.

ColdCard MK5 Mount Features

• Designed for the ColdCard MK5 hardware wallet
• 3D printed by CryptoCloaks
• Low-profile holder for desk, shelf, cabinet, or wall placement
• Helps keep your Bitcoin signing device visible and easy to grab
• Clean self-custody desk accessory for home offices, workshops, and Bitcoin setups
• Only $7.99

Installation and Setup

Place the mount where your ColdCard MK5 naturally belongs in your workflow. Depending on your setup, it can be positioned near your computer, signing station, safe area, or Bitcoin desk. Keep your device accessible when you need it and out of the random desk-junk danger zone when you do not.

This listing is for the mount only. ColdCard device, cables, tools, and any other accessories shown in photos are not included unless explicitly stated in the selected product option.

What It Fits

This page is for the ColdCard MK5 Mount. Match the mount to your exact ColdCard generation before ordering so your Bitcoin hardware wallet setup stays clean.

• Laser Etched ColdCard Wallet Cases and Sleeves
• Seedor Safe Starter Set for Bitcoin seed backup

Why CryptoCloaks

CryptoCloaks builds Bitcoin-native 3D printed accessories for people who actually use this stuff. The goal is not novelty plastic. The goal is useful shop-made gear that cleans up your setup, supports real self-custody, and looks like it belongs next to Bitcoin hardware.

If your ColdCard MK5 is part of your long-term Bitcoin plan, give it a real home.

FAQ

Does this fit the ColdCard MK5?

Yes. This product page is for the ColdCard MK5 Mount.

Does this listing include a ColdCard?

No. This listing is for the 3D printed mount only. The ColdCard device is not included.

Is this for the MK5 version?

Yes. This page is for the ColdCard MK5 Mount. Match your mount to your exact ColdCard generation before ordering.

Who is this for?

Bitcoiners who want their ColdCard MK5 organized, visible, and ready at their signing station instead of floating around loose on a desk.

Order the ColdCard MK5 Mount

Clean up the desk. Give the ColdCard MK5 a real spot. Keep your Bitcoin signing setup tight.

The post MK5 ColdCard Mount appeared first on CryptoCloaks.

Your Trezor is worth protecting, but leaving it loose on a desk puts expensive hardware at risk of theft, damage, or simply being knocked to the floor. The Trezor Safe Mount from CryptoCloaks gives your device a secure, discreet home for $7.99, without drilling into walls or settling for a generic shelf that was never designed for a hardware wallet.

Table of Contents

• What Is the Trezor Safe Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the Trezor Safe Mount

The Trezor Safe Mount is a purpose-built bracket designed to hold your Trezor Safe 3 or Trezor Safe 5 securely under a desk, on a wall, or inside a cabinet. CryptoCloaks engineered this mount specifically for these two devices, so the fit is exact rather than approximate. No adapters, no foam padding, no hoping it stays put.

Generic stands treat your hardware wallet like any small gadget. This mount treats it like the secure signing device it is. It keeps your Trezor accessible when you need it and hidden from view the rest of the time, adding a layer of physical security that an open shelf simply cannot provide.

The design supports two installation methods. Use #8 screws for a permanent, rock-solid install. Or choose the 3M tape option for a clean, damage-free placement that will not leave residue on painted surfaces. Either way, the Trezor Safe Mount holds firm once in place and stays there.

Why CryptoCloaks

CryptoCloaks has been operating in the Bitcoin space since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop in America. When you order a Trezor Safe Mount, you are not waiting on an overseas warehouse or trusting a faceless fulfillment center to get the details right.

Every unit is printed to order. That means fresh material, not old stock sitting in a bin for months. It also means CryptoCloaks can offer color options, black or white, and fulfill orders quickly without carrying excess inventory. The result is a product that arrives in good condition and fits as designed.

CryptoCloaks builds mounts for a range of hardware wallets, not just Trezor. If you run a multi-wallet security setup, browse the full lineup at Other hardware wallet mounts to find options for your entire stack. Every product ships from the same American shop, with the same level of care.

Specs and Compatibility

The Trezor Safe Mount fits the Trezor Safe 3 and Trezor Safe 5 only. It does not accommodate older Trezor hardware like the Model One or Model T. If you are unsure which version you own, the Trezor Safe 5 official specs page lists the physical dimensions you need to confirm compatibility before ordering.

• Compatible Models: Trezor Safe 3, Trezor Safe 5
• Mounting Methods: #8 Screws or 3M Tape
• Materials: 3D Printed (to order)
• Colors: Black, White
• Dimensions: 9″ × 6″ × 1″
• Weight: 3 oz
• Price: $7.99
• Fulfillment: Printed to order, ships from America

At 3 oz and $7.99, this is one of the most cost-effective physical security upgrades you can make for your hardware wallet setup. The compact dimensions keep the footprint minimal whether you mount it under a desk, on a wall stud, or inside a storage enclosure.

How It Compares

The Trezor Safe Mount outperforms the alternatives across every dimension that matters: device fit, price, discretion, and installation method. Here is a direct side-by-side breakdown:

DIY solutions require trial-and-error and risk permanent damage to your device housing. Generic stands leave your hardware visible to anyone who walks past. The Trezor Safe Mount solves both problems at $7.99 flat, with no technical skill required for installation.

Frequently Asked Questions

Will this Trezor Safe Mount work with the Trezor Safe 7?

The Trezor Safe Mount is engineered specifically for the Trezor Safe 3 and Trezor Safe 5. Newer models like the Trezor Safe 7 may carry different physical dimensions and are not confirmed compatible with this bracket. CryptoCloaks designs each mount to precise device specifications, so compatibility is never assumed based on brand family alone. If you own a Safe 7 or another newer Trezor variant, contact CryptoCloaks directly to ask whether a compatible mount exists or is currently in development. Older Trezor hardware, including the Model One and Model T, uses a different form factor entirely and will not seat correctly in this bracket. Always verify your exact device model before adding to cart to avoid a return.

Does the 3M tape option damage walls or leave residue?

3M Command-style tape is designed to release cleanly from most painted drywall, wood, and smooth surfaces when removed using the proper pull-tab method. Under typical conditions, you will see no residue and no surface damage after removal. However, results vary depending on wall surface type, paint finish, and how long the tape has been in place. Fresh paint, wallpaper, and heavily textured surfaces carry a higher risk of peeling. CryptoCloaks recommends testing a small strip of 3M tape on an inconspicuous area before committing to a permanent placement. The #8 screw option is always available as an alternative if you prefer a mechanical mount that does not rely on adhesive. Both methods hold the device securely under normal use conditions.

How durable is a 3D printed mount over the long term?

CryptoCloaks prints the Trezor Safe Mount using quality filament selected for structural reliability. Because the mount holds a lightweight device in a static position rather than bearing dynamic mechanical load, the material faces minimal stress in everyday use. Under normal indoor conditions, a properly printed mount will last for years without cracking, warping, or losing its grip on the wall surface. Extended UV exposure can affect some filament types over time, so placing the mount away from direct sunlight is a reasonable precaution. If you ever need a replacement down the line, CryptoCloaks prints every unit to order, so you can reorder an identical mount at any time. At $7.99, replacing one several years from now is a low-stakes decision.

Pick up your Trezor Safe Mount today and stop leaving your hardware exposed. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Trezor Safe Mount appeared first on CryptoCloaks.

Maximalist’s rejoice! Your favorite wallet finally has a mounting solution!

Info:
– #8 Screws (Screw) OR 3M Tape (Screwless)
– 3D Printed to order!

The post MK3 ColdCard Mount appeared first on CryptoCloaks.

Info:
– #8 Screws (Screw) OR 3M Tape (Screwless)
– 3D Printed to order!

The post Trezor One Mount appeared first on CryptoCloaks.

ColdCard MK4 Mount: Purpose-Built for Your Bitcoin Hardware Wallet

Your ColdCard is sitting loose on a cluttered desk or rattling around in a drawer. That is no way to treat the device guarding your bitcoin. The ColdCard MK4 mount from CryptoCloaks puts your hardware wallet exactly where it belongs, locked in, organized, and ready when you need it.

Table of Contents

• What Is the ColdCard MK4 Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the ColdCard MK4 Mount

The ColdCard MK4 mount is a 3D printed holder designed from the ground up to fit the Coinkite MK4 form factor. It holds your COLDCARD MK4 hardware wallet securely on a desk, shelf, under a monitor, or anywhere else in your setup. This is not a universal adapter or a generic slot that sort of fits. It was built for the MK4 specifically.

One verified buyer put it simply: the fit was “like an absolute glove.” That kind of feedback does not come from a generic holder. It comes from a product designed around the exact dimensions of the device it holds. CryptoCloaks confirmed that fit before putting it on the market, and customers continue to confirm it after the fact.

Additionally, the ColdCard MK4 mount works with both the original Coinkite clear sleeves and CryptoCloaks cases and sleeves. You do not have to strip your wallet bare just to dock it. That compatibility is intentional, not accidental, and it sets this product apart from any DIY solution you might cobble together.

Why CryptoCloaks

CryptoCloaks has been building bitcoin hardware accessories since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop. When you order a ColdCard MK4 mount from CryptoCloaks, it comes from a person who understands this space, not a dropshipper who does not know a ColdCard from a thumb drive.

Every mount is printed to order. That means fresh parts, not old shelf stock. It also means customization is on the table. Choose from 20 colors: Black, Cherry Red, Red, Orange, Yellow, White, Florescent Green, Green, Dark Green, Dark Blue, Blue, Clear, Beige, Bronze, Silver, Purple, Pink, Marble, Gold, and Teal. Add custom text engraving for an additional $3.00, which is a useful option for labeling wallets in a multisig setup or simply making the piece your own.

If you want a full protection solution alongside your mount, pair it with the ColdCard MK4 case and sleeve from CryptoCloaks. Both products are designed to work together. The mount fits whether your wallet is in a case or not, so you never have to choose between organized and protected.

Specs and Compatibility

The ColdCard MK4 mount ships ready to install. Full specifications are listed below.

• Price: $7.99 (on sale from $9.99)
• Weight: 3 oz
• Dimensions: 9 x 6 x 1 in
• Mount Method: #8 Screws or 3M Tape
• Default Color: Black
• Color Options: 20 colors including Black, Cherry Red, Teal, Marble, Gold, Purple, and more
• Custom Text Engraving: Available for +$3.00
• Compatibility: MK4 ColdCard with Original Clear Sleeves or CryptoCloaks Cases and Sleeves
• Production: 3D printed to order in the USA
• SKU: CC-HW-MK4COLDMOUN

The dual install system deserves a closer look. Screw mounting with standard #8 screws gives you a permanent, rock-solid installation on wood, drywall, or metal. The 3M tape option handles renters, shared workspaces, or any surface where drilling is not practical. No other purpose-built ColdCard MK4 mount on the market gives you both methods in a single product at this price point.

How It Compares

Coinkite sells the wallet but offers zero mounting or organization accessories. Generic DIY options exist, but none are fit-tested for the MK4 specifically. The ColdCard MK4 mount from CryptoCloaks is effectively the only purpose-built solution on the market. Here is how it stacks up.

Frequently Asked Questions

Does the ColdCard MK4 mount work with CryptoCloaks cases and sleeves on the wallet?

Yes. The ColdCard MK4 mount is designed to accommodate the MK4 with both the original Coinkite clear sleeves and CryptoCloaks cases and sleeves installed. Most generic holders require you to remove any case before docking your wallet, which adds friction to your daily routine and increases the risk of dropping or mishandling the device. CryptoCloaks built this mount to work with their own cases from the start, so the compatibility is tested and intentional, not a lucky coincidence. If you are running a CryptoCloaks case on your MK4, the mount accepts it without modification, forced fitting, or any compromise to the hold. You get organization and protection at the same time.

Can I mount this under a desk without screws?

Yes. The ColdCard MK4 mount fully supports 3M tape installation, which makes undersurface or screwless mounting straightforward. This is the right choice for renters, anyone in a shared office, or setups where drilling into a surface is not an option. The 3M tape method holds firmly on most clean, flat surfaces, including the underside of desks, the back panels of shelving units, and the stands of monitor arms. If you later need to relocate your setup, the tape removes cleanly from most surfaces without leaving residue or damage. Screw mounting with standard #8 screws remains available for those who want a fully permanent installation that does not flex or shift over time.

What screw size do I need to install the ColdCard MK4 mount?

The ColdCard MK4 mount uses standard #8 screws for permanent installation. This is one of the most common screw sizes available at any hardware store, so you will not need to track down specialty fasteners or order anything additional. The #8 size provides a solid, reliable hold on wood surfaces, drywall with appropriate anchors, and metal with the right hardware for the surface type. If drilling is not an option for your setup, the 3M tape method is a fully supported alternative that requires no tools and no fasteners at all. Both installation methods are designed to hold the mount firmly in a stationary workspace so your wallet stays secure and accessible during daily use.

Order your ColdCard MK4 mount today and give your hardware wallet a setup that reflects how seriously you take your bitcoin security. Choose from 20 colors, add custom engraving for $3.00, and get a purpose-built fit that no generic solution can match. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post MK4 ColdCard Mount appeared first on CryptoCloaks.

Your BitBox02 sits on your desk in plain sight, and that is a problem. The CryptoCloaks BitBox02 hardware wallet mount fixes that with a purpose-built, 3D-printed holder that keeps your device concealed, within reach, and locked in place.

Table of Contents

• What Is the BitBox Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the BitBox02 Hardware Wallet Mount

The BitBox Mount is a 3D-printed holder designed from the ground up for the BitBox02 hardware wallet. CryptoCloaks prints each unit to order from its shop in America, in your choice of 18+ colors. No generic shelf product here. Every piece is made fresh for your specific order.

This BitBox02 hardware wallet mount attaches under your desk, behind your monitor, or anywhere you want your device concealed and accessible. The dual mounting system gives you two real options: drive four #8 screws for a permanent, rigid install, or use 3M adhesive tape for a completely screwless setup. Renters, apartment dwellers, and no-drill setups are fully covered.

Shiftcrypto builds an excellent device with the BitBox02 Bitcoin-only hardware wallet by Shiftcrypto, but they sell no mounting solution of any kind. That gap is exactly what this BitBox02 hardware wallet mount was built to fill.

Why CryptoCloaks

CryptoCloaks has been operating in the bitcoin hardware space since 2017. Ricky, the founder, personally picks, prints, and ships every single order. When you buy a BitBox02 hardware wallet mount from CryptoCloaks, a real person with skin in the game handles your order before it ships. That is not something a mass-production warehouse can offer.

Most 3D-printed accessories come in one color: whatever filament was loaded that day. CryptoCloaks offers 18+ color options on every mount, plus optional custom text for an additional $3.00. Your setup, your look. Additionally, this BitBox02 hardware wallet mount is part of a broader lineup of purpose-built bitcoin accessories. Browse the full collection of hard wallet mounts for all major hardware wallets if you run more than one device.

The default color is black. However, if you want something that matches your desk setup or stands out as a statement piece, the color upgrade is just $3.00. Custom text on the BitBox02 hardware wallet mount runs the same price. Both can be added to a single order without pushing the total into painful territory.

Specs and Compatibility

• SKU: CC-HW-BITBMOUN
• Price: $7.99 (sale from $9.99)
• Weight: 1 oz
• Dimensions: 9 x 6 x 1 in
• Default color: Black
• Color options: 18+ colors available (+$3.00)
• Custom text: Yes (+$3.00)
• Mounting options: #8 screws (4x) or 3M tape (screwless)
• Manufacture: 3D printed to order in America
• Wallet compatibility: BitBox02 (all editions, including Bitcoin-only)
• Wallet included: No

This BitBox02 hardware wallet mount fits both the standard BitBox02 and the Bitcoin-only edition. Shiftcrypto uses identical physical dimensions across both variants. The form factor, port placement, and body shape are the same, so the mount works for both without modification or adapters.

How It Compares

No competitor sells a purpose-built BitBox02 hardware wallet mount. Shiftcrypto focuses on firmware and device security, not desk accessories. The only alternative is a DIY solution from scrap materials or a generic bracket that was never designed for the BitBox02 form factor. Therefore, this mount stands alone in its category.

Frequently Asked Questions

Does this mount fit the BitBox02 Bitcoin-only edition?

Yes. The BitBox02 hardware wallet mount from CryptoCloaks fits both the standard BitBox02 and the Bitcoin-only edition. Shiftcrypto uses the same physical dimensions for both variants of the device. The body shape, port placement, and overall footprint are identical across editions. CryptoCloaks designed this BitBox02 hardware wallet mount around those shared dimensions, so you do not need to specify which edition you own when placing your order. Whether you run the multi-edition firmware or the Bitcoin-only edition, the mount holds your device securely in place. No modifications, no adapters, and no additional hardware required. Mount it, connect your device, and get on with your stack.

Can I install the BitBox mount without drilling any holes?

Yes. The CryptoCloaks BitBox02 hardware wallet mount ships with two installation methods built in. The first is a traditional screw mount using four #8 screws for a permanent, rigid install on wood or drywall surfaces. The second is a fully screwless option using 3M adhesive tape. The tape option holds firmly on flat surfaces including the underside of desks, the back of monitors, and smooth wall panels. This makes the BitBox02 hardware wallet mount a practical choice for renters, people in shared office spaces, or anyone who prefers not to put hardware into their furniture. Press the tape-backed mount into place, allow the adhesive to set for a few hours, and your device is secured without a single hole drilled.

Is the BitBox02 hardware wallet included with the mount?

No. This listing is for the BitBox02 hardware wallet mount only. The BitBox02 device itself is sold separately by Shiftcrypto and is not included here. CryptoCloaks makes the physical mounting accessory. Shiftcrypto makes the wallet. If you are looking to purchase a BitBox02, visit the official Shiftcrypto site directly. The BitBox02 hardware wallet mount from CryptoCloaks is designed to work with a device you already own or are purchasing separately. Make sure you have the wallet before ordering, because this mount is printed to order specifically for you and cannot be returned once it has been manufactured.

Order your BitBox02 hardware wallet mount today for $7.99. Pick from 18+ colors, add custom text if you want it, and get a purpose-built mount that fits your device and your setup. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post BitBox Mount appeared first on CryptoCloaks.