Blockstream Jade Plus mount for a cleaner Bitcoin setup

A hardware wallet works better when you know exactly where it is. This compact Jade Plus holder keeps the device in a repeatable spot instead of leaving it loose on a desk, buried in a drawer, or mixed into a pile of cables.

The mount is shaped for the newer Jade Plus form factor shown in the product photos. Blockstream lists the Jade Plus at 65 × 30 × 12 mm, with a 1.9-inch display, camera, USB-C, Bluetooth, and SD card or USB-drive support. The original Blockstream Jade uses a different enclosure. This listing is for Jade Plus only and is not compatible with the original Jade.

Why use a dedicated Jade Plus hardware wallet holder?

Choose Screw or Screwless mounting

Screw

Select Screw when you want visible mechanical fastening points. Choose screws and anchors that match the mounting surface, and check for wiring or plumbing before drilling.

Screwless

Select Screwless for an installation designed around suitable 3M mounting tape. Adhesive mounting works best on a clean, smooth, non-porous surface. Surface preparation, temperature, tape selection, and installation direction all affect the bond.

For overhead or against-gravity placement, use the screw-ready version when maximum mechanical retention matters. Do not install the mount where a release could drop the device onto a person, a hard floor, or another object.

Jade Plus Mount color options

The standard mount is black. Optional custom colors are available through the product add-on selector for an additional $3. Because every mount is 3D printed to order, normal layer lines and slight surface variation are part of the manufacturing process.

What is included?

• One CryptoCloaks Jade Plus Mount in the selected Screw or Screwless configuration
• Your selected custom color when purchased through the add-on field

Not included: Jade Plus hardware wallet, screws, wall anchors, tools, furniture, cables, Bitcoin, or any item not explicitly listed in the selected product configuration. The Jade Plus shown in the photos demonstrates fit only.

Jade Plus Mount specifications

About Jade Plus compatibility

This holder is designed for the Blockstream Jade Plus form factor. Blockstream lists the Jade Plus enclosure at 65 × 30 × 12 mm and offers reinforced-plastic and metal versions. Confirm that your device is a Jade Plus before ordering. Do not force an original Jade or another hardware wallet into the holder.

This CryptoCloaks mount is a physical organization accessory only. It does not generate, store, back up, recover, or secure Bitcoin keys, and it does not change the Jade Plus security model. Follow Blockstream’s official instructions for setup, firmware, signing, recovery, and device security.

Installation guide

1. Confirm that your device is the Jade Plus shown in this listing, not the original Jade.
2. Choose a dry location away from heat, moisture, direct sunlight, impact, and cable strain.
3. For the Screw version, use fasteners and anchors suitable for the mounting surface.
4. For the Screwless version, clean and dry a smooth mounting surface before applying suitable 3M mounting tape.
5. Install the empty mount first and verify that it is stable.
6. Insert the Jade Plus gently. Never force a device that does not match the Jade Plus form factor.
7. Recheck the installation periodically, especially after temperature changes or when adhesive is used.

Explore more Bitcoin hardware mounts

Browse the CryptoCloaks Docks & Mounts collection for other purpose-built Bitcoin hardware wallet holders, including the separate original Blockstream Jade Mount.

Jade Plus Mount FAQ

Which Blockstream device does this mount fit?

It is designed for the Blockstream Jade Plus form factor shown in the product photos.

Does it fit the original Blockstream Jade?

No. The original Jade uses a different enclosure. Use the separate original Blockstream Jade Mount instead.

Is a Jade Plus hardware wallet included?

No. This listing includes the 3D-printed mount only. The device shown in the photos demonstrates fit.

What is the difference between Screw and Screwless?

The Screw version provides mechanical fastening points. The Screwless version is designed for installation with suitable 3M mounting tape on a clean, smooth surface.

Can I mount it under a desk?

Yes, if the surface and mounting method can safely support the mount and device. The screw-ready version is the stronger choice for long-term against-gravity installation.

Can I install it on a wall or inside a cabinet?

Yes, on a suitable flat surface. Use the mounting method appropriate for the surface and installation direction.

What color is the standard mount?

The standard color is black. Optional custom colors are available for an additional $3.

Does this mount improve digital security?

No. It is a physical storage and organization accessory. It does not alter the Jade Plus keys, signing process, recovery, firmware, or security model.

Is this an official Blockstream product?

No. This is an independent CryptoCloaks accessory made for the Blockstream Jade Plus hardware wallet. CryptoCloaks is not affiliated with or endorsed by Blockstream.

Where is the Jade Plus Mount made?

It is 3D printed to order by CryptoCloaks.

The post Jade Plus Mount appeared first on CryptoCloaks.

Bitkey Mount for the second-generation Bitkey with screen

Keep your Bitkey hardware organized instead of leaving it loose on a desk, buried in a drawer, or mixed into a pile of cables. This compact holder is shaped around the second-generation, screen-equipped Bitkey hardware device and provides a repeatable storage location near your Bitcoin setup.

The pictured hardware is the newer Bitkey introduced in 2026 with an OLED touchscreen and fingerprint sensor. Its enclosure differs from the original screenless model. This mount fits the second-generation Bitkey with the screen shown in the product photos. It does not fit the first-generation screenless Bitkey.

Why use a dedicated Bitkey hardware wallet mount?

Choose Screw or Screwless mounting

Screw

Select Screw when you want a mount with mechanical fastening points. This is the stronger choice for wood, an appropriate anchored surface, or an installation where the mount will hold against gravity for long periods. Choose fasteners and anchors that match the mounting surface.

Screwless

Select Screwless for a clean installation using 3M tape rather than drilled fasteners. Adhesive mounting performs best on a clean, smooth, non-porous surface. Clean the surface first, press the mount firmly into place, and allow the adhesive to bond before loading the device. Adhesive performance depends on the surface, preparation, temperature, and installation.

Do not place the mount where a release could cause the hardware device to fall onto a person, a hard floor, or another object. The screw-ready option is recommended when maximum mechanical retention matters.

Bitkey Mount color and customization options

The standard mount is black. The product form also matches the customization setup used on the CryptoCloaks MK5 ColdCard Mount:

• Custom text: add up to 8 characters to the top of the mount for an additional $3.
• Custom mount color: choose an available custom color for an additional $3.
• Installation style: choose Screw or Screwless before adding the mount to your cart.

Because CryptoCloaks prints each mount to order, small layer lines and normal surface variation are part of the 3D-printing process.

What is included?

• One CryptoCloaks Bitkey Mount in the selected installation style
• Your selected custom text or custom color when purchased through the add-on fields

Not included: Bitkey hardware device, phone, Bitcoin, cables, tools, wall anchors, furniture, or any item not explicitly listed in the selected product configuration. The Bitkey shown in the photo demonstrates fit only.

Compatibility and fit

About second-generation Bitkey compatibility

This mount is shaped for the current screen-equipped Bitkey, introduced in 2026. Bitkey lists an OLED touchscreen display, biometric fingerprint sensor, NFC, USB-C charging, and a 66 mm x 60 mm x 13.6 mm enclosure. Read the manufacturer’s introduction to the new Bitkey for device details.

This CryptoCloaks mount is a physical storage and organization accessory only. It does not generate, store, back up, recover, or secure Bitcoin keys, and it does not change the security model of the Bitkey wallet. Follow Bitkey’s official instructions for setup, use, recovery, firmware, and account security.

Bitkey Mount vs leaving the device loose

Installation guide

1. Confirm that your hardware is the second-generation Bitkey with the screen shown in this listing.
2. Choose a location that keeps the device accessible without exposing it to heat, moisture, direct sunlight, impact, or cable strain.
3. For the Screw version, select fasteners and anchors suitable for the surface. Check for wiring and plumbing before drilling.
4. For the Screwless version, clean and dry a smooth mounting surface before applying the 3M tape.
5. Install the empty mount first and verify that it is stable.
6. Insert the Bitkey gently. Never force a device that does not match the pictured second-generation form factor.
7. Recheck the mount periodically, especially after temperature changes or if adhesive is used.

Explore more Bitcoin hardware mounts

Building a cleaner Bitcoin workstation? Browse the CryptoCloaks Docks & Mounts collection for other purpose-built hardware wallet holders and mounting accessories.

Bitkey Mount FAQ

Which Bitkey does this mount fit?

It is designed for the second-generation Bitkey with the screen shown in the product photos.

Does this fit the first-generation screenless Bitkey?

No. The original screenless Bitkey has a different enclosure. Order this mount only for the pictured second-generation screen-equipped device.

Is a Bitkey hardware wallet included?

No. This listing includes the 3D-printed mount only. The Bitkey device in the photo demonstrates fit and is not included.

What is the difference between Screw and Screwless?

The Screw option provides mechanical mounting points. The Screwless option is intended for installation with 3M tape on a suitable clean, smooth surface.

Can I install the Bitkey Mount under a desk?

Yes, if the chosen surface and mounting method can safely support the mount and device. For long-term overhead or against-gravity installation, the screw-ready option provides the strongest mechanical retention.

Can I mount it on a wall or inside a cabinet?

Yes, on a suitable flat surface. Use appropriate screws and anchors or properly applied 3M tape based on the surface and installation direction.

What color is the standard mount?

The standard mount is black. Optional custom colors are available through the product add-on selector for an additional $3.

Can I add text to the mount?

Yes. Optional custom text of up to 8 characters is available for an additional $3.

Is the custom color fee charged in addition to custom text?

Yes. Custom text and custom color are separate optional add-ons, each priced at $3.

Does this mount improve Bitkey’s digital security?

No. It is a physical organization accessory. It does not alter Bitkey’s keys, signing, recovery, fingerprint approval, firmware, or multisig security model.

Is this an official Bitkey product?

No. This is an independent CryptoCloaks accessory made for the second-generation screen-equipped Bitkey hardware device. CryptoCloaks is not affiliated with or endorsed by Block, Inc. or Bitkey.

Where is the Bitkey Mount made?

It is 3D printed to order by CryptoCloaks.

The post Bitkey Mount appeared first on CryptoCloaks.

The ColdCard Mk5 Dock is a 3D printed desktop stand built for bitcoiners who want a cleaner self-custody desk. Instead of laying your ColdCard loose on the table and chasing a cable every time you need to sign, this dock gives your Mk5 a dedicated home with a USB-C to USB-C cable built into the dock.

Set the dock near your computer, choose your printed color, and keep the connector ready. The exposed USB-C plug sits inside the stand so the ColdCard Mk5 can drop into place for a cleaner hardware wallet workflow.

Why this ColdCard Mk5 dock exists

A ColdCard Mk5 is a serious Bitcoin self-custody tool. The desk setup around it should be just as intentional. This dock keeps the wallet upright, easier to see, and easier to connect without adding another loose cable to the pile.

• Designed for ColdCard Mk5: shaped as a dedicated desktop dock/stand for the Mk5 form factor.
• Built-in USB-C to USB-C cable: the cable is part of the dock setup, with the connector positioned for easy plug-in.
• Clean signing station: keeps your hardware wallet upright, organized, and ready for Bitcoin transactions.
• 3D printed by CryptoCloaks: made in-house for real Bitcoin self-custody setups.
• Any color, same price: choose your dock color at checkout. Color does not change the $7.99 price.

What is included

• 1x CryptoCloaks ColdCard Mk5 Dock in your selected color
• 1x built-in USB-C to USB-C cable installed/routed with the dock

What is not included

• ColdCard Mk5 hardware wallet
• Computer, laptop, or other signing device

Compatibility

This dock is made for the ColdCard Mk5. It is built around a USB-C connection and is intended as a desktop hardware wallet stand for Bitcoin signing setups.

If you need a different holder, check the full Hard Wallet Mounts category for other CryptoCloaks hardware wallet mounts.

FAQ

Does this include a ColdCard Mk5?

No. This listing is for the 3D printed dock with built-in USB-C to USB-C cable only. The ColdCard hardware wallet is not included.

Does the dock include the USB-C cable?

Yes. This version has a USB-C to USB-C cable built into the dock setup.

Does color change the price?

No. Pick the color you want. Every color option is $7.99.

Is this a wall mount?

No. This is a desktop dock/stand for keeping your ColdCard Mk5 upright and easier to plug in near your computer.

Is this official Coinkite/Coldcard hardware?

No. This is a CryptoCloaks 3D printed dock designed for ColdCard Mk5 owners. ColdCard/Coinkite hardware wallet is not included.

The post ColdCard Mk5 Dock – USB-C Hardware Wallet Stand appeared first on CryptoCloaks.

The Trezor Safe 7 Dock is a 3D printed desktop stand built to hold your Trezor Safe 7 at a comfortable angle while making the USB-C connection easier to reach. Instead of laying the wallet flat, chasing the cable around your desk, or leaving it loose between signing sessions, this dock gives the device a simple home base.

Why this dock exists

The Trezor Safe 7 is a serious self-custody tool. The setup around it should feel just as intentional. This dock keeps the wallet upright, stable, and ready to connect to your computer using the USB-C cable that comes with the hardware wallet.

• Designed for Trezor Safe 7: shaped to hold the device nicely without a generic phone-stand fit.
• USB-C cable channel: routes the cable through the front of the dock for a cleaner plug-in setup.
• Desktop friendly: keeps the hardware wallet visible, organized, and easier to grab when it is time to sign.
• 3D printed by CryptoCloaks: made for Bitcoiners who care about their self-custody workspace.
• Color selectable: choose the dock color at checkout. Color does not change the price.

What is included

• 1x CryptoCloaks Trezor Safe 7 Dock in your selected color

What is not included

• Trezor Safe 7 hardware wallet
• USB-C cable

Compatibility

This dock is made for the Trezor Safe 7. It uses the USB-C cable that comes with the hardware wallet. If you need a different holder, check the full Hard Wallet Mounts category for other CryptoCloaks hardware wallet mounts.

FAQ

Does this include the Trezor Safe 7?

No. This listing is for the 3D printed dock only. The hardware wallet is shown for fit/reference and is not included.

Does it include a USB-C cable?

No. It is designed to use the USB-C cable that comes with the Trezor Safe 7.

Does color change the price?

No. Pick the color you want. The dock price stays the same.

Is this a wall mount?

No. This is a desktop dock/stand made to hold the Safe 7 upright near your computer.

The post Trezor Safe 7 Dock – USB-C Hardware Wallet Stand appeared first on CryptoCloaks.