Table of Contents

• What Is The Block Moments?
• What Moments Deserve a Block?
• How It Works
• What You Get
• Customization Options
• Why CryptoCloaks
• FAQ

What Is The Block Moments?

Some moments deserve more than a photo on your phone. The Block Memorial is a fully custom, laser engraved 3D printed monument — designed to permanently mark the moments that matter most in a Bitcoiner’s life.

It’s a matte black geometric cube, laser engraved on the exterior, open-faced to reveal a colored-framed inner plaque. The plaque is laser engraved with whatever you want on it — a block height, a date, a name, a milestone, an amount. It sits on your desk and doesn’t move. It doesn’t need to. It already says everything.

There is nothing else like this. We designed it, we make it by hand in Colorado, and every single one is unique.

What Moments Deserve a Block?

The Block Memorial was built for Bitcoiners — but the moments it marks are universal. Here’s what people are using it for:

• Solo Bitcoin block found — the rarest thing a home miner can do. Mark it forever with your block height, date, and reward.
• First Bitcoin purchase — the block you were born into this. “Block #[height]. April 9, 2026. 0.01 BTC. The beginning.”
• Wedding / anniversary — the block mined on your wedding day. A gift that exists on-chain forever.
• Child’s birth — stamp their birth block into something they’ll keep their whole life.
• Bitcoin halving — block 840,000. Block 1,050,000. The moments Bitcoin history turned.
• Going full self-custody — the day you moved off exchange. That’s worth memorializing.
• Paying off debt in sats — the stack that set you free.
• Business milestones — first Bitcoin-native sale. First million sats in revenue.
• Corporate awards — replace the generic glass plaque with something that actually means something.

You tell us the moment. We build it.

How It Works

1. Order and tell us your moment — at checkout, leave a note with what you want on the plaque. Block height, date, name, amount, quote — whatever tells the story.
2. We design your plaque — we’ll send you a proof of the laser engraving layout before we cut anything. You approve it.
3. We build it by hand — 3D printed in Colorado, laser engraved, assembled. Each one takes time because each one is made for you specifically.
4. Ships to you — carefully packed. Arrives ready to display.

Turnaround: approximately 5-7 business days from proof approval.

What You Get

• Matte black 3D printed outer cube — laser engraved geometric pattern exterior
• Colored-framed inner plaque mount — suspended on center pillar (Gold Shown)
• Custom laser engraved black inner plaque — your text, your moment
• Open-face display design — always visible, no lid to lose
• Approximately 4″ x 4″ x 4″ — desk display size
• Handmade in Colorado, USA

Customization Options

The plaque can display anything you want — here are the most popular layouts:

Exterior pattern options are available — ask us at checkout. We can match patterns to occasions (geometric, circuit board, honeycomb, and more).

Why CryptoCloaks

• We’re Bitcoiners building for Bitcoiners — we understand what these moments mean. We don’t make generic trophies.
• Handmade in Colorado — every Block Memorial is made by hand, not mass produced overseas.
• Bitcoin accepted — always. Pay in sats.
• You approve before we PEW IT — proof sent before engraving. No surprises.
• Ships worldwide — wherever you are, your moment deserves to be marked.

FAQ

Q: How long does it take?
A: Approximately 5-7 business days from when you approve your proof. Rush orders may be possible — ask us at checkout.

Q: What information do I need to provide?
A: Just tell us what you want on the plaque. Block height, date, name, amount, quote — whatever tells your story. We’ll design the layout and send you a proof.

Q: Can I choose the exterior pattern?
A: You can either have Art Deco or plain! If there’s a custom logo or image we can try that also!

Q: What size is it?
A: Approximately 4″ x 4″ x 4″. Desk display size — substantial enough to be a statement piece, compact enough for any workspace.

Q: Can I order one for someone else as a gift?
A: Absolutely. Leave the recipient’s details and the moment you want to memorialize. We can ship directly to them with no invoice included.

Q: Do you make corporate versions for non-Bitcoin milestones?
A: Yes. The Block Memorial works for any significant milestone — business achievements, employee awards, personal records. It doesn’t have to be Bitcoin-specific. Contact us to discuss.

Q: Is the Block Found edition (for solo miners) different from this?
A: The free Block Found Edition is exclusively for verified solo Bitcoin block finders and is given free as a community gift. The Block Memorial is the purchasable version — fully custom, available to anyone, for any occasion.

Q: Do you accept Bitcoin?
A: Always. We’re bitcoin-native. Pay in sats.

The post The Block Moments appeared first on CryptoCloaks.

Your Jade Plus is a serious piece of hardware you carry, travel with, and rely on. Leaving it unprotected in a pocket or bag is how screens get scratched and buttons get worn down. The CryptoCloaks Blockstream Jade Plus case is a precision 3D-printed TPU 95 shell that fits your device exactly and keeps it protected without getting in the way.

Table of Contents

• What Is the Jade Plus Squish Case
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the Jade Plus Squish Case

The Squish Case is a custom-designed Blockstream Jade Plus case built from TPU 95, a thermoplastic polyurethane that flexes under pressure and returns to shape. CryptoCloaks modeled this case around the exact dimensions of the Jade Plus, not a rough approximation of a similarly-sized device. The result is a tight, accurate fit with cutouts positioned precisely where they need to be.

TPU 95 occupies the right middle ground between rigid plastic and soft silicone. Hard plastic cases absorb impact by cracking. Generic silicone sleeves tend to fit loosely, shift around in your pocket, and often interfere with button access because the cutouts were never built around this specific device. TPU 95 flexes enough to snap on with minimal effort, then stays firm enough to protect against drops and daily friction.

CryptoCloaks offers this case in three colors: Orange, Black, and Clear. Each option weighs just 2 oz, so you are not adding bulk to your carry setup. At $6.99, it is one of the most affordable purpose-built cases available for the Jade Plus, and unlike generic alternatives, it was engineered for this device from the start.

Why CryptoCloaks Builds the Right Blockstream Jade Plus Case

CryptoCloaks has been producing precision 3D-printed bitcoin hardware accessories since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop in America. This Blockstream Jade Plus case is not a resold generic product. It is a CryptoCloaks original built to the tolerances that award-winning 3D printing equipment allows.

Verified buyers confirm that button access is fully unrestricted with the Squish Case fitted. That is a critical detail. A case that partially covers or stiffens button response turns a useful accessory into a daily irritation. CryptoCloaks designs for actual use, meaning every cutout placement is tested against the real device before the design goes into production.

If you are running other bitcoin hardware that also needs protection, check out our other hardware wallet cases. CryptoCloaks covers a wide range of devices with the same custom-fit philosophy applied to every design in the lineup.

Specs and Compatibility

This Blockstream Jade Plus case ships ready to use. No adhesives, no assembly, no tools required. Full specifications below.

• Product: Blockstream Jade Plus Squish Case
• Material: TPU 95 (thermoplastic polyurethane)
• Weight: 2 oz
• Color options: Orange, Black, Clear
• Compatible device: Blockstream Jade Plus hardware wallet only
• Design type: Custom-fitted protective shell
• Print quality: Award-winning CryptoCloaks precision 3D printing
• Price: $6.99
• Origin: Made in America

This case is compatible with the Jade Plus only. It does not fit the original Jade or any other Blockstream device. Verify your model before ordering.

How It Compares

Most Jade Plus owners either use no case at all or settle for a generic silicone sleeve designed for a loosely similar device. Here is how the CryptoCloaks Blockstream Jade Plus case measures up against those options.

Frequently Asked Questions

Does this TPU case protect the Jade Plus screen and buttons during travel?

Yes. The Blockstream Jade Plus case wraps the full body of your device with TPU 95, a material that compresses on impact rather than cracking, so drops and bumps are absorbed before they reach the hardware. The case covers the screen area, the sides, and the back, which addresses the main points of wear for a device that spends time in a pocket or bag alongside keys and other items. The custom fit keeps the case firmly in position during travel rather than shifting and exposing the device to friction. Additionally, TPU 95 does not harden or become brittle in colder temperatures the way some rigid plastics do, which matters if you travel to cold environments. Verified buyers carry their Jade Plus daily in this case without issue. For a hardware wallet you rely on to store real value, that level of baseline protection is worth $6.99 without debate.

Will the case interfere with Jade Plus button operation?

No, and that is one of the core design priorities of the Squish Case. The Blockstream Jade Plus case features precisely placed cutouts modeled against the actual device geometry, not estimated clearances. Generic cases commonly fail here in one of two ways: the material is thick enough to create resistance over the button area, or the cutout positions do not align correctly with the Jade Plus layout and require trimming to fix. CryptoCloaks addresses these problems before the design ships by testing against the real device. Verified buyer reviews confirm that every button on the Jade Plus remains fully functional and responsive with the case fitted. Therefore, you can sign transactions, verify addresses, and navigate menus normally without removing the case each time. If you ever encounter an issue, CryptoCloaks stands behind its work and Ricky handles support directly.

Why choose TPU over silicone for protecting a hardware wallet?

Silicone and TPU feel similar out of the box, but they perform differently over months of real use. Silicone tends to stretch and lose its original shape after repeated removal and refitting, meaning a snug silicone case today may be a sloppy one six months from now. It also attracts lint and debris more aggressively and discolors faster with UV and skin contact. TPU 95, however, holds dimensional stability longer, bonds more cleanly to device surfaces, and provides firmer structural support without becoming brittle under pressure. For a hardware wallet, dimensional stability matters because a loose-fitting case offers minimal real protection. The Blockstream Jade Plus case made from TPU 95 delivers flexibility where it counts, on impact, and structural reliability where it matters, during daily carry. It is also easier to wipe clean than silicone alternatives, which is a practical consideration for a device you handle with your hands regularly.

Order your Blockstream Jade Plus case today and give your hardware wallet the protection it has earned. Choose from Orange, Black, or Clear. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Blockstream Jade Plus – Squish Case appeared first on CryptoCloaks.

Stamping a seed phrase onto metal is not the place for guesswork, and a jig that gives you only 12 index positions leaves too much room for crooked letters and costly mistakes. The CryptoCloaks 1 Inch Washer Stamping Jig gives you 16 precisely indexed positions around the full circumference of a standard 1-inch washer, so every character lands exactly where you intend it.

Table of Contents

• What Is the CryptoCloaks 1 Inch Washer Stamping Jig
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the CryptoCloaks 1 Inch Washer Stamping Jig

A washer stamping jig is a small positioning tool that holds a metal washer firmly in place while you strike letter or number punches into its face. Without a jig, each punch lands wherever your eye and hammer decide, which means uneven spacing, slanted characters, and a finished backup that looks (and reads) like a mess. The jig solves that problem by giving you a fixed seat for the washer and a series of indexed notches or holes that tell you exactly where to set the punch before each strike.

This jig is designed for standard 1-inch outer-diameter washers, which is the most widely used size in the bitcoin seed backup community. The 16 indexed marking spots are spaced evenly around the full 360-degree circumference, giving you more placement options than the original BlockMIT design and enough positions to stamp a full BIP39 word list abbreviation on a single washer face without running characters together. The tool ships flat, measures 3 x 3 x 0.25 inches, and weighs 2.7 ounces, so it adds almost nothing to your kit.

The jig is compatible with a standard 1/8-inch (3mm) square engraving punch, the same punch size used by most dedicated seed-stamping sets on the market. If you already own a punch set for metal stamping, there is a very good chance you can put this jig to work today without buying any additional tooling. If you are building your stamping kit from scratch, pairing this jig with a set of 3mm square punches and a set of 1 inch stainless steel washers for seed stamping gives you everything you need to create a durable, fire-resistant, corrosion-resistant bitcoin seed backup.

Why CryptoCloaks

CryptoCloaks has been operating as a bitcoin-native shop since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop in America. That is not marketing copy. It means when you have a question about your order, you are talking to the person who made it. It means quality control does not get outsourced to a fulfillment warehouse. And it means that the verified 5-star reviews attached to this product come from real people who have used this specific jig to stamp real seed phrases, not from reviewers who received a generic product shipped from an anonymous marketplace listing.

The jig is available in 17 colors: Black, Cherry Red, Red, Orange, Yellow, White, Florescent Green, Green, Dark Green, Dark Blue, Blue, Clear, Beige, Bronze, Silver, Purple, and Pink. That range is not just cosmetic. Color-coding your backup tools is a legitimate organizational strategy when you are managing wallets across multiple hardware signers or maintaining separate backups for different purposes. Picking a dedicated color for each backup context takes 10 seconds and eliminates the risk of grabbing the wrong jig mid-process.

Stamping mistakes happen. A mis-strike and you break the jig. That is why the backup bundle option exists. For $4.99 you get two jigs instead of one. That is $1.98 per jig, If you break a jig you got a spare! No competitor listing on eBay or Etsy offers a comparable bundle with this kind of pricing transparency.

Specs and Compatibility

• Outer diameter compatibility: 1 inch OD (25.4mm), fits 24mm washers
• Indexed marking positions: 16
• Dimensions: 3 x 3 x 0.25 inches
• Weight: 2.7 oz
• Material: 3D printed
• Colors available: 17 (Black, Cherry Red, Red, Orange, Yellow, White, Florescent Green, Green, Dark Green, Dark Blue, Blue, Clear, Beige, Bronze, Silver, Purple, Pink) Randomly Chosen per order
• Punch compatibility: 1/8 inch (3mm) square engraving punch
• SKU: CC-BG-CRYP1INCH
• Back Up jig: 2 jigs for $4.99

Metal seed backups are one of the most reliable ways to protect a bitcoin wallet against loss from fire, water, or hardware failure. If you are new to the process, the Bitcoin Foundation’s guide on how to securely back up your Bitcoin wallet is a solid starting point before you pick up a punch set. Once you understand what you are protecting and why, the physical stamping process becomes straightforward, and having a precision jig like this one removes the last variable that turns a careful backup into a sloppy one.

How It Compares

Frequently Asked Questions

What size washers fit the CryptoCloaks 1 inch stamping jig?

This jig is designed to seat standard 1-inch outer-diameter (25.4mm) washers securely, and it also accommodates 24mm washers. These are the most common washer sizes used in the bitcoin seed backup community because they offer enough surface area to stamp a meaningful amount of text while remaining compact enough to store easily. Hardware store washers in this size range are widely available in stainless steel, which resists corrosion and holds up well under heat. If you want to skip the hardware store trip, CryptoCloaks sells purpose-made stainless steel washers sized specifically for this jig. When sourcing washers independently, confirm the outer diameter before purchasing because washers labeled as “1 inch” can vary slightly between manufacturers and may not seat correctly in the jig if they run oversized.

Do I need a special punch set to use this jig, and what size punch does it take?

The jig is designed for a standard 1/8-inch (3mm) square engraving punch, which is the most common punch size sold in dedicated bitcoin and crypto seed-stamping kits. If you already own a stamping kit for metal work, check the punch tip size first. Round punches can also work in some cases, but square-tipped punches produce cleaner, more legible characters on metal washers because the flat edges create sharper lines. You do not need any specialty bitcoin-branded tooling. A basic 3mm letter and number punch set available from most tool suppliers pairs directly with this jig. The key is consistency: use the same punch depth and hammer weight for each strike, and the 16 index positions on this jig will keep your characters aligned without any additional guesswork.

Why does the bundle come with two jigs instead of one?

Because stamping a seed phrase onto metal is a process where mistakes happen, and when they do, having a second jig ready matters more than you expect. The jig itself is not consumable, but it is a small 3D printed part that can crack or warp if a heavy hammer strike misses the punch and lands on the tool directly. Simply have a spare on hand without waiting on a reorder. At $4.99 for the pair, you are paying $1.98 per jig. It is the most sensible way to buy this tool if you are taking your seed backup process seriously, and no comparable bundle option exists on eBay or Etsy for this product category.

Order the CryptoCloaks 1 Inch Washer Stamping Jig today and get a precision seed phrase stamping tool built by a bitcoin-native shop that has been in the space since 2017. Grab the jigs and have a spare on hand, and stamp with confidence knowing exactly where every character lands. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post CryptoCloaks 1 Inch Washer Stamping Jigs appeared first on CryptoCloaks.

Table of Contents

1. Why you need this
2. What you need to get started
3. 24mm vs 1 inch — which do I need?
4. What’s included
5. How it works
6. Why buy from CryptoCloaks
7. FAQ

Why you need this BlockMIT Jig

Your Bitcoin seed phrase is the only thing standing between you and permanent loss. Paper burns at 451°F. Floods destroy it. House fires happen. If your seed phrase is on paper or in a digital file, it’s one disaster away from gone forever.

The Blockmit jig makes it easy to stamp your seed phrase into standard metal washers — the kind that survive house fires, floods, and 50+ years of storage. No special skills, no expensive tools, no excuses.

This is the simplest fireproof Bitcoin backup solution available. At $4.99, there’s no reason not to.

What you need to get started

The Blockmit jig is the alignment tool. You’ll also need:

• Metal washers — 24mm OD (outer diameter). Get them on Amazon here
• Letter/number punch set — 1/8″ (3mm) size. Get the punch set here
• Hammer — any steel hammer, 1-2 lbs
• Hard surface — concrete floor, anvil, or steel plate

That’s it. Total setup cost under $30. Protects a lifetime of Bitcoin.

Need the washers in 1-inch size instead? Check out our CC 1-inch Washer Jig — fits standard US hardware store washers.

24mm vs 1 inch — which do I need?

Both work. The Blockmit jig is the original format. The CC jig uses washers you can buy at Home Depot today.

What’s included

• 2x Blockmit washer jigs
• Two jigs included in case one gets damaged during stamping
• Punch set and washers NOT included — see links above

Shipped from Colorado. Bitcoin accepted.

How it works

1. Place a 24mm washer into the jig slot
2. Position your letter punch on the first marking spot
3. Strike firmly with a hammer
4. Advance to the next spot, repeat for each letter of your seed word
5. One washer per seed word — 12 or 24 washers for a complete backup
6. Store in a fireproof safe, safety deposit box, or buried steel container

Full visual guide: DIY Seed Phrase Backup Tutorial — Estudio Bitcoin

Why buy from CryptoCloaks

• Bitcoin-native — we use what we sell. Self-custody is core to everything we do.
• Ships from Colorado — next business day, no overseas wait
• Bitcoin accepted — pay in sats
• 25 reviews at 4.88 stars — real Bitcoiners, real results
• 2 jigs for $4.99 — one for the job, one backup in case of a missed strike

Also check out our Seedor Safe seed storage for an engraved stainless steel alternative — no stamping required.

FAQ

Does the Blockmit jig come with washers?

No. Washers and punch set are sold separately. You need 24mm OD metal washers and a 1/8″ (3mm) letter punch set. Links above.

Is this fireproof?

The jig itself is 3D printed plastic — not fireproof. But the washers you stamp are steel, which is fireproof. The jig is just the alignment tool. Your finished backup washers are what survives a fire.

How many washers do I need?

One washer per seed word. A 12-word seed = 12 washers. A 24-word seed = 24 washers.

What punch size do I need?

1/8″ (3mm). This is the size that fits the Blockmit jig slots correctly.

What’s the difference between the Blockmit jig and the CC 1-inch jig?

The Blockmit jig uses 24mm washers (order online). The CC 1-inch jig uses standard 1-inch washers available at any US hardware store. The CC jig also has 16 alignment spots vs the original format.

Does CryptoCloaks accept Bitcoin?

Yes. Bitcoin native. Pay in sats.

What are the exact dimensions?

See pictures below.

The post Blockmit Washer Jigs appeared first on CryptoCloaks.