Your Jade Plus is a serious piece of hardware you carry, travel with, and rely on. Leaving it unprotected in a pocket or bag is how screens get scratched and buttons get worn down. The CryptoCloaks Blockstream Jade Plus case is a precision 3D-printed TPU 95 shell that fits your device exactly and keeps it protected without getting in the way.

Table of Contents

• What Is the Jade Plus Squish Case
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the Jade Plus Squish Case

The Squish Case is a custom-designed Blockstream Jade Plus case built from TPU 95, a thermoplastic polyurethane that flexes under pressure and returns to shape. CryptoCloaks modeled this case around the exact dimensions of the Jade Plus, not a rough approximation of a similarly-sized device. The result is a tight, accurate fit with cutouts positioned precisely where they need to be.

TPU 95 occupies the right middle ground between rigid plastic and soft silicone. Hard plastic cases absorb impact by cracking. Generic silicone sleeves tend to fit loosely, shift around in your pocket, and often interfere with button access because the cutouts were never built around this specific device. TPU 95 flexes enough to snap on with minimal effort, then stays firm enough to protect against drops and daily friction.

CryptoCloaks offers this case in three colors: Orange, Black, and Clear. Each option weighs just 2 oz, so you are not adding bulk to your carry setup. At $6.99, it is one of the most affordable purpose-built cases available for the Jade Plus, and unlike generic alternatives, it was engineered for this device from the start.

Why CryptoCloaks Builds the Right Blockstream Jade Plus Case

CryptoCloaks has been producing precision 3D-printed bitcoin hardware accessories since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop in America. This Blockstream Jade Plus case is not a resold generic product. It is a CryptoCloaks original built to the tolerances that award-winning 3D printing equipment allows.

Verified buyers confirm that button access is fully unrestricted with the Squish Case fitted. That is a critical detail. A case that partially covers or stiffens button response turns a useful accessory into a daily irritation. CryptoCloaks designs for actual use, meaning every cutout placement is tested against the real device before the design goes into production.

If you are running other bitcoin hardware that also needs protection, check out our other hardware wallet cases. CryptoCloaks covers a wide range of devices with the same custom-fit philosophy applied to every design in the lineup.

Specs and Compatibility

This Blockstream Jade Plus case ships ready to use. No adhesives, no assembly, no tools required. Full specifications below.

• Product: Blockstream Jade Plus Squish Case
• Material: TPU 95 (thermoplastic polyurethane)
• Weight: 2 oz
• Color options: Orange, Black, Clear
• Compatible device: Blockstream Jade Plus hardware wallet only
• Design type: Custom-fitted protective shell
• Print quality: Award-winning CryptoCloaks precision 3D printing
• Price: $6.99
• Origin: Made in America

This case is compatible with the Jade Plus only. It does not fit the original Jade or any other Blockstream device. Verify your model before ordering.

How It Compares

Most Jade Plus owners either use no case at all or settle for a generic silicone sleeve designed for a loosely similar device. Here is how the CryptoCloaks Blockstream Jade Plus case measures up against those options.

Frequently Asked Questions

Does this TPU case protect the Jade Plus screen and buttons during travel?

Yes. The Blockstream Jade Plus case wraps the full body of your device with TPU 95, a material that compresses on impact rather than cracking, so drops and bumps are absorbed before they reach the hardware. The case covers the screen area, the sides, and the back, which addresses the main points of wear for a device that spends time in a pocket or bag alongside keys and other items. The custom fit keeps the case firmly in position during travel rather than shifting and exposing the device to friction. Additionally, TPU 95 does not harden or become brittle in colder temperatures the way some rigid plastics do, which matters if you travel to cold environments. Verified buyers carry their Jade Plus daily in this case without issue. For a hardware wallet you rely on to store real value, that level of baseline protection is worth $6.99 without debate.

Will the case interfere with Jade Plus button operation?

No, and that is one of the core design priorities of the Squish Case. The Blockstream Jade Plus case features precisely placed cutouts modeled against the actual device geometry, not estimated clearances. Generic cases commonly fail here in one of two ways: the material is thick enough to create resistance over the button area, or the cutout positions do not align correctly with the Jade Plus layout and require trimming to fix. CryptoCloaks addresses these problems before the design ships by testing against the real device. Verified buyer reviews confirm that every button on the Jade Plus remains fully functional and responsive with the case fitted. Therefore, you can sign transactions, verify addresses, and navigate menus normally without removing the case each time. If you ever encounter an issue, CryptoCloaks stands behind its work and Ricky handles support directly.

Why choose TPU over silicone for protecting a hardware wallet?

Silicone and TPU feel similar out of the box, but they perform differently over months of real use. Silicone tends to stretch and lose its original shape after repeated removal and refitting, meaning a snug silicone case today may be a sloppy one six months from now. It also attracts lint and debris more aggressively and discolors faster with UV and skin contact. TPU 95, however, holds dimensional stability longer, bonds more cleanly to device surfaces, and provides firmer structural support without becoming brittle under pressure. For a hardware wallet, dimensional stability matters because a loose-fitting case offers minimal real protection. The Blockstream Jade Plus case made from TPU 95 delivers flexibility where it counts, on impact, and structural reliability where it matters, during daily carry. It is also easier to wipe clean than silicone alternatives, which is a practical consideration for a device you handle with your hands regularly.

Order your Blockstream Jade Plus case today and give your hardware wallet the protection it has earned. Choose from Orange, Black, or Clear. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Blockstream Jade Plus – Squish Case appeared first on CryptoCloaks.

Your Blockstream Jade sits on the desk collecting scratches while you hunt for a mount that actually fits it. The Blockstream Jade wallet mount from CryptoCloaks is sized to the Jade’s exact footprint, ships from a bitcoin-native shop in America, and gives you two clean install options for $7.99.

Table of Contents

• What Is the Blockstream Jade Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the Blockstream Jade Wallet Mount

The Blockstream Jade wallet mount is a purpose-built holder machined to the Jade’s exact 3 x 2 x 1 inch body. It is not a universal cradle, not a repurposed phone stand, and not a generic clip that happens to grip it loosely. Every dimension was drawn for one device: the Blockstream Jade hardware wallet.

At checkout, you pick your install method. The screw variant uses four #8 screws and locks the mount permanently to wood, drywall, or any substrate that accepts a fastener. The screwless variant uses industrial-grade 3M tape and removes cleanly without pulling paint or leaving residue. Both versions deliver identical fit and hold. The choice is purely about your surface and your preference for permanence.

Blockstream sells the Jade through their official store, but they offer zero mounting or storage accessories. The Blockstream Jade wallet mount fills that gap. Whether your Jade lives on a standing desk, inside a cabinet, or mounted under a shelf, this holder gives it a dedicated, secure spot that keeps it accessible without looking like an afterthought.

Why CryptoCloaks

CryptoCloaks has been 3D printing bitcoin hardware since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop in America. There is no warehouse, no fulfillment contractor, and no overseas production line. When your Blockstream Jade wallet mount ships, a real person who has been in the bitcoin space for years packed it.

Every mount is printed to order. That matters because tolerances stay tight. A unit that has been sitting in a bin for six months will fit differently than one printed fresh to your order. CryptoCloaks prints fresh, calibrates regularly, and stands behind every unit it ships. The result is a jade hardware wallet mount that seats the device on the first try, every time.

CryptoCloaks builds device-specific mounts across the full range of bitcoin hardware. The MK3 ColdCard Mount is a popular companion piece for setups that run a Jade and a ColdCard side by side. The design philosophy is consistent across every product: tight tolerances, dual install options, and quality that reflects bitcoin-native standards rather than mass-production shortcuts.

Specs and Compatibility

• Compatible Device: Blockstream Jade hardware wallet
• Mount Dimensions: 3 x 2 x 1 in
• Weight: 1 oz
• Mount Options: Screw (4x #8 screws) or Screwless (3M tape)
• Material: 3D printed to order
• SKU: CC-HW-BLOCJADEMOUN
• Price: $7.99
• Origin: Made in America

The screw variant ships with four #8 screws included. The screwless variant arrives with the 3M tape pre-positioned on the back plate. Select your install method from the product options dropdown before adding to cart. No additional hardware is required beyond what ships in the package.

This Blockstream Jade wallet mount is sized for the original Jade form factor. If you own the Jade Plus, review the FAQ below before ordering to confirm fit details.

How It Compares

The market for bitcoin hardware wallet holders falls into two categories: the Blockstream official store (which sells the device but offers no mounting accessories) and generic adhesive clips on Amazon (which use universal sizing and adhesive-only installs). The Blockstream Jade wallet mount is neither of those.

Generic holders compete on price by cutting corners on fit. A universal cradle might cost a dollar less, but loose tolerances mean the Jade shifts over time and the install never feels intentional. Additionally, most generic options lock you into adhesive as the only mounting method. The jade mount screwless option from CryptoCloaks gives you industrial tape as a clean alternative, while the screw option gives you a permanent, load-bearing install that generic clips cannot match.

Frequently Asked Questions

Will this mount fit the Blockstream Jade Plus as well as the original Jade?

The Blockstream Jade wallet mount is dimensioned specifically for the original Blockstream Jade hardware wallet, which measures 3 x 2 x 1 inches. The Jade Plus carries a slightly different form factor, with a larger display and revised casing dimensions that do not match the original Jade’s footprint. Therefore, this mount is not guaranteed to be a snug fit for the Jade Plus. CryptoCloaks designs each holder to match the exact device specs rather than approximating a close-enough fit. If you own a Jade Plus and want a dedicated mount, contact CryptoCloaks before ordering so Ricky can confirm compatibility or point you toward the correct option. Ordering the wrong size wastes your time and costs a return shipment. When in doubt, ask first.

What surfaces can I mount the Jade to? Does it work under a desk or inside a cabinet?

The Blockstream Jade wallet mount works on any flat surface where your chosen hardware can grip. The screw variant is ideal for wood surfaces: the underside of a desk, the inside of a cabinet door, or a wall panel. Four #8 screws provide a permanent, load-bearing hold that will not shift. The screwless 3M tape variant performs best on smooth, non-porous surfaces such as metal desk legs, glass panels, or powder-coated enclosures. It is not recommended for textured drywall or rough wood, where the adhesive bond will be weaker. For under-desk installs where the mount must hold against gravity long-term, the screw version is the stronger choice. For clean desk setups where you want zero holes, the 3M tape variant holds reliably on any smooth horizontal or vertical surface.

Does the screwless version hold securely long-term, or will the 3M tape fail over time?

The jade mount screwless variant uses industrial-grade 3M tape, the same adhesive category used in automotive trim and commercial signage. On a clean, smooth surface, this bond holds firmly for years under the weight of a Blockstream Jade hardware wallet. The tape is rated for far more than the 1 oz static load this mount carries. However, long-term performance depends on surface prep. Clean the mounting surface with isopropyl alcohol before applying, press firmly for 30 seconds, and allow 24 hours for the adhesive to fully cure before loading the device into the mount. Avoid mounting on freshly painted walls before the paint has fully hardened. Follow those steps and the Blockstream Jade wallet mount will stay in place indefinitely. If the tape ever needs replacing, 3M VHB replacement strips are available at any hardware store.

Add the Blockstream Jade wallet mount to your cart and give your signing device the dedicated, secure home it deserves. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Blockstream Jade Mount appeared first on CryptoCloaks.