OneKey Classic 1S
High Quality ABS
1.54 inch LCD
86 x 52 x 5.2 mm
20.5 g
✅
Bluetooth
✅
USB-C
110mA Lithium Battery
Compatible with Mac & PC & Mobile Phone

The post OneKey Hardware Wallet – Official Reseller appeared first on CryptoCloaks.

Your Trezor is worth protecting, but leaving it loose on a desk puts expensive hardware at risk of theft, damage, or simply being knocked to the floor. The Trezor Safe Mount from CryptoCloaks gives your device a secure, discreet home for $7.99, without drilling into walls or settling for a generic shelf that was never designed for a hardware wallet.

Table of Contents

• What Is the Trezor Safe Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the Trezor Safe Mount

The Trezor Safe Mount is a purpose-built bracket designed to hold your Trezor Safe 3 or Trezor Safe 5 securely under a desk, on a wall, or inside a cabinet. CryptoCloaks engineered this mount specifically for these two devices, so the fit is exact rather than approximate. No adapters, no foam padding, no hoping it stays put.

Generic stands treat your hardware wallet like any small gadget. This mount treats it like the secure signing device it is. It keeps your Trezor accessible when you need it and hidden from view the rest of the time, adding a layer of physical security that an open shelf simply cannot provide.

The design supports two installation methods. Use #8 screws for a permanent, rock-solid install. Or choose the 3M tape option for a clean, damage-free placement that will not leave residue on painted surfaces. Either way, the Trezor Safe Mount holds firm once in place and stays there.

Why CryptoCloaks

CryptoCloaks has been operating in the Bitcoin space since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop in America. When you order a Trezor Safe Mount, you are not waiting on an overseas warehouse or trusting a faceless fulfillment center to get the details right.

Every unit is printed to order. That means fresh material, not old stock sitting in a bin for months. It also means CryptoCloaks can offer color options, black or white, and fulfill orders quickly without carrying excess inventory. The result is a product that arrives in good condition and fits as designed.

CryptoCloaks builds mounts for a range of hardware wallets, not just Trezor. If you run a multi-wallet security setup, browse the full lineup at Other hardware wallet mounts to find options for your entire stack. Every product ships from the same American shop, with the same level of care.

Specs and Compatibility

The Trezor Safe Mount fits the Trezor Safe 3 and Trezor Safe 5 only. It does not accommodate older Trezor hardware like the Model One or Model T. If you are unsure which version you own, the Trezor Safe 5 official specs page lists the physical dimensions you need to confirm compatibility before ordering.

• Compatible Models: Trezor Safe 3, Trezor Safe 5
• Mounting Methods: #8 Screws or 3M Tape
• Materials: 3D Printed (to order)
• Colors: Black, White
• Dimensions: 9″ × 6″ × 1″
• Weight: 3 oz
• Price: $7.99
• Fulfillment: Printed to order, ships from America

At 3 oz and $7.99, this is one of the most cost-effective physical security upgrades you can make for your hardware wallet setup. The compact dimensions keep the footprint minimal whether you mount it under a desk, on a wall stud, or inside a storage enclosure.

How It Compares

The Trezor Safe Mount outperforms the alternatives across every dimension that matters: device fit, price, discretion, and installation method. Here is a direct side-by-side breakdown:

DIY solutions require trial-and-error and risk permanent damage to your device housing. Generic stands leave your hardware visible to anyone who walks past. The Trezor Safe Mount solves both problems at $7.99 flat, with no technical skill required for installation.

Frequently Asked Questions

Will this Trezor Safe Mount work with the Trezor Safe 7?

The Trezor Safe Mount is engineered specifically for the Trezor Safe 3 and Trezor Safe 5. Newer models like the Trezor Safe 7 may carry different physical dimensions and are not confirmed compatible with this bracket. CryptoCloaks designs each mount to precise device specifications, so compatibility is never assumed based on brand family alone. If you own a Safe 7 or another newer Trezor variant, contact CryptoCloaks directly to ask whether a compatible mount exists or is currently in development. Older Trezor hardware, including the Model One and Model T, uses a different form factor entirely and will not seat correctly in this bracket. Always verify your exact device model before adding to cart to avoid a return.

Does the 3M tape option damage walls or leave residue?

3M Command-style tape is designed to release cleanly from most painted drywall, wood, and smooth surfaces when removed using the proper pull-tab method. Under typical conditions, you will see no residue and no surface damage after removal. However, results vary depending on wall surface type, paint finish, and how long the tape has been in place. Fresh paint, wallpaper, and heavily textured surfaces carry a higher risk of peeling. CryptoCloaks recommends testing a small strip of 3M tape on an inconspicuous area before committing to a permanent placement. The #8 screw option is always available as an alternative if you prefer a mechanical mount that does not rely on adhesive. Both methods hold the device securely under normal use conditions.

How durable is a 3D printed mount over the long term?

CryptoCloaks prints the Trezor Safe Mount using quality filament selected for structural reliability. Because the mount holds a lightweight device in a static position rather than bearing dynamic mechanical load, the material faces minimal stress in everyday use. Under normal indoor conditions, a properly printed mount will last for years without cracking, warping, or losing its grip on the wall surface. Extended UV exposure can affect some filament types over time, so placing the mount away from direct sunlight is a reasonable precaution. If you ever need a replacement down the line, CryptoCloaks prints every unit to order, so you can reorder an identical mount at any time. At $7.99, replacing one several years from now is a low-stakes decision.

Pick up your Trezor Safe Mount today and stop leaving your hardware exposed. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Trezor Safe Mount appeared first on CryptoCloaks.

Maximalist’s rejoice! Your favorite wallet finally has a mounting solution!

Info:
– #8 Screws (Screw) OR 3M Tape (Screwless)
– 3D Printed to order!

The post MK3 ColdCard Mount appeared first on CryptoCloaks.

Info:
– #8 Screws (Screw) OR 3M Tape (Screwless)
– 3D Printed to order!

The post Trezor One Mount appeared first on CryptoCloaks.

The SeedSigner case from CryptoCloaks is a custom 3D-printed enclosure for your open-source Bitcoin signing device, built in Colorado on Bambu printers and available in 19 colors for both the top plate and bottom shell. This is the Orange Surf artist collab edition — every purchase sends 15,000 sats directly to Orange Surf’s crowdfund. Hardware not included.

What Is a SeedSigner Case

The SeedSigner open-source project lets you build a verifiably air-gapped, stateless Bitcoin signing device from off-the-shelf Raspberry Pi Zero components for under $50. No persistent storage. No battery. No wireless. Just a clean, sovereign signing tool you build yourself.

A good case protects the build, keeps the camera and screen aligned, and makes the device feel finished instead of like a bare circuit board. This case fits the standard SeedSigner build with a Raspberry Pi Zero, 1.3″ Waveshare display, and Pi Camera Module. Precision 3D printed on Bambu printers for tight tolerances and a clean fit.

If you’re serious about Bitcoin self-custody, the SeedSigner is one of the most sovereign signing devices available. This case makes sure it doesn’t look like a science fair project.

The Orange Surf Collab

This isn’t a generic case. The Orange Surf edition is a direct artist collaboration between CryptoCloaks and Orange Surf. Every single sale sends 15,000 sats straight to Orange Surf’s crowdfund – no middlemen, no delays, just sats moving on bitcoin rails the way they should.

Buy a SeedSigner case, protect your signing device, and fund bitcoin art at the same time. That’s the kind of commerce that makes sense.

19+ Custom Color Combinations

Both the top plate and bottom shell of this SeedSigner case are available in 19 colors each – mix and match to build your own combination. Options include Black, Cherry Red, Red, Orange, Yellow, White, Florescent Green, Green, Dark Green, Dark Blue, Blue, Clear, Beige, Bronze, Silver, Purple, Pink, Gold, and Teal.

361 possible combinations. Pick the one that’s yours.

Specs

Why Buy From CryptoCloaks

CryptoCloaks is a bitcoin-native 3D printing shop run by a solo operator in Colorado. Every case is printed on Bambu hardware, ships next day, and you can pay in bitcoin. No corporate middlemen, no subscription fees, no KYC checkout.

If you’re building out your self-custody stack, check out our Coldcard Q cases for your hardware signing device. The SeedSigner case and Coldcard Q case together cover both sides of a solid multisig setup.

FAQ

Does the SeedSigner hardware come with this case?

No. This is the case only. You’ll need to source the SeedSigner hardware separately – Raspberry Pi Zero, Waveshare 1.3″ display, and Pi Camera Module. Total hardware cost is typically under $50.

Which SeedSigner build does this case fit?

This SeedSigner case is designed for the standard build: Raspberry Pi Zero (1 or 2), Waveshare 1.3″ LCD HAT, and the standard Pi camera module. Check the SeedSigner documentation for the exact hardware list.

How many color combinations are available?

19 colors for the top plate and 19 for the bottom shell – that’s 361 possible combinations. Choose them independently when you add to cart.

How long does shipping take?

Ships next day from Colorado. Bitcoin accepted at checkout.

Is this a good gift for a bitcoiner?

Yes. If someone in your life is building their own SeedSigner or has one sitting in a bag unprotected, this SeedSigner case is a practical and personal gift. You can customize the colors to match their setup or let them pick. $9.99 shipped from Colorado with sats going to the Orange Surf crowdfund makes it a gift that supports the ecosystem too.

Why Your SeedSigner Deserves a Proper Case

The whole point of building a SeedSigner is sovereignty. Air-gapped, stateless, open-source – you own the keys, you own the signing process, no company can shut it down or lock you out. A bare circuit board on a shelf undermines that energy. A proper SeedSigner case turns it into a piece of your self-custody stack you can be proud of.

CryptoCloaks builds cases for the serious bitcoiner. If your signing device is worth protecting – and it is – it deserves a proper home. Order yours, pick your colors, and get 2,500 sats flowing to Orange Surf while you’re at it.

Every case we ship is printed to order on Bambu hardware in Colorado. No inventory sitting in a warehouse. No generic injection-molded plastic. A real 3D printed case made by hand for the bitcoin community, shipped the next business day.

The post SeedSigner – Orange Surf Case appeared first on CryptoCloaks.

ColdCard MK4 Mount: Purpose-Built for Your Bitcoin Hardware Wallet

Your ColdCard is sitting loose on a cluttered desk or rattling around in a drawer. That is no way to treat the device guarding your bitcoin. The ColdCard MK4 mount from CryptoCloaks puts your hardware wallet exactly where it belongs, locked in, organized, and ready when you need it.

Table of Contents

• What Is the ColdCard MK4 Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the ColdCard MK4 Mount

The ColdCard MK4 mount is a 3D printed holder designed from the ground up to fit the Coinkite MK4 form factor. It holds your COLDCARD MK4 hardware wallet securely on a desk, shelf, under a monitor, or anywhere else in your setup. This is not a universal adapter or a generic slot that sort of fits. It was built for the MK4 specifically.

One verified buyer put it simply: the fit was “like an absolute glove.” That kind of feedback does not come from a generic holder. It comes from a product designed around the exact dimensions of the device it holds. CryptoCloaks confirmed that fit before putting it on the market, and customers continue to confirm it after the fact.

Additionally, the ColdCard MK4 mount works with both the original Coinkite clear sleeves and CryptoCloaks cases and sleeves. You do not have to strip your wallet bare just to dock it. That compatibility is intentional, not accidental, and it sets this product apart from any DIY solution you might cobble together.

Why CryptoCloaks

CryptoCloaks has been building bitcoin hardware accessories since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop. When you order a ColdCard MK4 mount from CryptoCloaks, it comes from a person who understands this space, not a dropshipper who does not know a ColdCard from a thumb drive.

Every mount is printed to order. That means fresh parts, not old shelf stock. It also means customization is on the table. Choose from 20 colors: Black, Cherry Red, Red, Orange, Yellow, White, Florescent Green, Green, Dark Green, Dark Blue, Blue, Clear, Beige, Bronze, Silver, Purple, Pink, Marble, Gold, and Teal. Add custom text engraving for an additional $3.00, which is a useful option for labeling wallets in a multisig setup or simply making the piece your own.

If you want a full protection solution alongside your mount, pair it with the ColdCard MK4 case and sleeve from CryptoCloaks. Both products are designed to work together. The mount fits whether your wallet is in a case or not, so you never have to choose between organized and protected.

Specs and Compatibility

The ColdCard MK4 mount ships ready to install. Full specifications are listed below.

• Price: $7.99 (on sale from $9.99)
• Weight: 3 oz
• Dimensions: 9 x 6 x 1 in
• Mount Method: #8 Screws or 3M Tape
• Default Color: Black
• Color Options: 20 colors including Black, Cherry Red, Teal, Marble, Gold, Purple, and more
• Custom Text Engraving: Available for +$3.00
• Compatibility: MK4 ColdCard with Original Clear Sleeves or CryptoCloaks Cases and Sleeves
• Production: 3D printed to order in the USA
• SKU: CC-HW-MK4COLDMOUN

The dual install system deserves a closer look. Screw mounting with standard #8 screws gives you a permanent, rock-solid installation on wood, drywall, or metal. The 3M tape option handles renters, shared workspaces, or any surface where drilling is not practical. No other purpose-built ColdCard MK4 mount on the market gives you both methods in a single product at this price point.

How It Compares

Coinkite sells the wallet but offers zero mounting or organization accessories. Generic DIY options exist, but none are fit-tested for the MK4 specifically. The ColdCard MK4 mount from CryptoCloaks is effectively the only purpose-built solution on the market. Here is how it stacks up.

Frequently Asked Questions

Does the ColdCard MK4 mount work with CryptoCloaks cases and sleeves on the wallet?

Yes. The ColdCard MK4 mount is designed to accommodate the MK4 with both the original Coinkite clear sleeves and CryptoCloaks cases and sleeves installed. Most generic holders require you to remove any case before docking your wallet, which adds friction to your daily routine and increases the risk of dropping or mishandling the device. CryptoCloaks built this mount to work with their own cases from the start, so the compatibility is tested and intentional, not a lucky coincidence. If you are running a CryptoCloaks case on your MK4, the mount accepts it without modification, forced fitting, or any compromise to the hold. You get organization and protection at the same time.

Can I mount this under a desk without screws?

Yes. The ColdCard MK4 mount fully supports 3M tape installation, which makes undersurface or screwless mounting straightforward. This is the right choice for renters, anyone in a shared office, or setups where drilling into a surface is not an option. The 3M tape method holds firmly on most clean, flat surfaces, including the underside of desks, the back panels of shelving units, and the stands of monitor arms. If you later need to relocate your setup, the tape removes cleanly from most surfaces without leaving residue or damage. Screw mounting with standard #8 screws remains available for those who want a fully permanent installation that does not flex or shift over time.

What screw size do I need to install the ColdCard MK4 mount?

The ColdCard MK4 mount uses standard #8 screws for permanent installation. This is one of the most common screw sizes available at any hardware store, so you will not need to track down specialty fasteners or order anything additional. The #8 size provides a solid, reliable hold on wood surfaces, drywall with appropriate anchors, and metal with the right hardware for the surface type. If drilling is not an option for your setup, the 3M tape method is a fully supported alternative that requires no tools and no fasteners at all. Both installation methods are designed to hold the mount firmly in a stationary workspace so your wallet stays secure and accessible during daily use.

Order your ColdCard MK4 mount today and give your hardware wallet a setup that reflects how seriously you take your bitcoin security. Choose from 20 colors, add custom engraving for $3.00, and get a purpose-built fit that no generic solution can match. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post MK4 ColdCard Mount appeared first on CryptoCloaks.

Your BitBox02 sits on your desk in plain sight, and that is a problem. The CryptoCloaks BitBox02 hardware wallet mount fixes that with a purpose-built, 3D-printed holder that keeps your device concealed, within reach, and locked in place.

Table of Contents

• What Is the BitBox Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the BitBox02 Hardware Wallet Mount

The BitBox Mount is a 3D-printed holder designed from the ground up for the BitBox02 hardware wallet. CryptoCloaks prints each unit to order from its shop in America, in your choice of 18+ colors. No generic shelf product here. Every piece is made fresh for your specific order.

This BitBox02 hardware wallet mount attaches under your desk, behind your monitor, or anywhere you want your device concealed and accessible. The dual mounting system gives you two real options: drive four #8 screws for a permanent, rigid install, or use 3M adhesive tape for a completely screwless setup. Renters, apartment dwellers, and no-drill setups are fully covered.

Shiftcrypto builds an excellent device with the BitBox02 Bitcoin-only hardware wallet by Shiftcrypto, but they sell no mounting solution of any kind. That gap is exactly what this BitBox02 hardware wallet mount was built to fill.

Why CryptoCloaks

CryptoCloaks has been operating in the bitcoin hardware space since 2017. Ricky, the founder, personally picks, prints, and ships every single order. When you buy a BitBox02 hardware wallet mount from CryptoCloaks, a real person with skin in the game handles your order before it ships. That is not something a mass-production warehouse can offer.

Most 3D-printed accessories come in one color: whatever filament was loaded that day. CryptoCloaks offers 18+ color options on every mount, plus optional custom text for an additional $3.00. Your setup, your look. Additionally, this BitBox02 hardware wallet mount is part of a broader lineup of purpose-built bitcoin accessories. Browse the full collection of hard wallet mounts for all major hardware wallets if you run more than one device.

The default color is black. However, if you want something that matches your desk setup or stands out as a statement piece, the color upgrade is just $3.00. Custom text on the BitBox02 hardware wallet mount runs the same price. Both can be added to a single order without pushing the total into painful territory.

Specs and Compatibility

• SKU: CC-HW-BITBMOUN
• Price: $7.99 (sale from $9.99)
• Weight: 1 oz
• Dimensions: 9 x 6 x 1 in
• Default color: Black
• Color options: 18+ colors available (+$3.00)
• Custom text: Yes (+$3.00)
• Mounting options: #8 screws (4x) or 3M tape (screwless)
• Manufacture: 3D printed to order in America
• Wallet compatibility: BitBox02 (all editions, including Bitcoin-only)
• Wallet included: No

This BitBox02 hardware wallet mount fits both the standard BitBox02 and the Bitcoin-only edition. Shiftcrypto uses identical physical dimensions across both variants. The form factor, port placement, and body shape are the same, so the mount works for both without modification or adapters.

How It Compares

No competitor sells a purpose-built BitBox02 hardware wallet mount. Shiftcrypto focuses on firmware and device security, not desk accessories. The only alternative is a DIY solution from scrap materials or a generic bracket that was never designed for the BitBox02 form factor. Therefore, this mount stands alone in its category.

Frequently Asked Questions

Does this mount fit the BitBox02 Bitcoin-only edition?

Yes. The BitBox02 hardware wallet mount from CryptoCloaks fits both the standard BitBox02 and the Bitcoin-only edition. Shiftcrypto uses the same physical dimensions for both variants of the device. The body shape, port placement, and overall footprint are identical across editions. CryptoCloaks designed this BitBox02 hardware wallet mount around those shared dimensions, so you do not need to specify which edition you own when placing your order. Whether you run the multi-edition firmware or the Bitcoin-only edition, the mount holds your device securely in place. No modifications, no adapters, and no additional hardware required. Mount it, connect your device, and get on with your stack.

Can I install the BitBox mount without drilling any holes?

Yes. The CryptoCloaks BitBox02 hardware wallet mount ships with two installation methods built in. The first is a traditional screw mount using four #8 screws for a permanent, rigid install on wood or drywall surfaces. The second is a fully screwless option using 3M adhesive tape. The tape option holds firmly on flat surfaces including the underside of desks, the back of monitors, and smooth wall panels. This makes the BitBox02 hardware wallet mount a practical choice for renters, people in shared office spaces, or anyone who prefers not to put hardware into their furniture. Press the tape-backed mount into place, allow the adhesive to set for a few hours, and your device is secured without a single hole drilled.

Is the BitBox02 hardware wallet included with the mount?

No. This listing is for the BitBox02 hardware wallet mount only. The BitBox02 device itself is sold separately by Shiftcrypto and is not included here. CryptoCloaks makes the physical mounting accessory. Shiftcrypto makes the wallet. If you are looking to purchase a BitBox02, visit the official Shiftcrypto site directly. The BitBox02 hardware wallet mount from CryptoCloaks is designed to work with a device you already own or are purchasing separately. Make sure you have the wallet before ordering, because this mount is printed to order specifically for you and cannot be returned once it has been manufactured.

Order your BitBox02 hardware wallet mount today for $7.99. Pick from 18+ colors, add custom text if you want it, and get a purpose-built mount that fits your device and your setup. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post BitBox Mount appeared first on CryptoCloaks.

Trezor T Mount: Dual Mounting Options, Precision Fit, $7.99

Your Trezor Model T deserves better than sitting loose on a desk or getting buried in a drawer between uses. This Trezor T mount is built specifically for the Model T, giving your hardware wallet a permanent, accessible home without the compromises that come with generic alternatives.

Table of Contents

• What Is the Trezor T Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the Trezor T Mount

The Trezor T mount is a purpose-built 3D printed holder designed exclusively for the Trezor Model T hardware wallet. CryptoCloaks engineered it from scratch to fit the Model T’s exact dimensions, not adapted from a phone stand or a repurposed charging dock. The result is a snug, secure fit that keeps your wallet accessible and properly oriented at all times.

Where the Trezor T mount separates itself from everything else on the market is the dual mounting system. You get two real installation paths: four #8 screws for a permanent, rock-solid mount on any wall or surface, or 3M adhesive tape for a damage-free temporary setup. Renters, home office setups, and anyone who rotates their hardware around multiple workspaces will appreciate having both options in a single product at a single price.

CryptoCloaks prints every unit to order. There is no warehouse full of identical plastic parts sitting around. Each Trezor T mount ships in the color you choose, black or white, produced specifically for your order. That is how made-to-order hardware is supposed to work.

Why CryptoCloaks

CryptoCloaks has been building bitcoin-native hardware accessories since 2017. Ricky, the founder, personally handles printing, quality control, and shipping from his shop in America. When you order a Trezor T mount from CryptoCloaks, a real person who has been in this space for years is handling your order before it goes in the box.

The made-to-order production model matters beyond freshness. It means CryptoCloaks can offer customization that mass-produced competitors cannot. The color options at checkout are the actual colors being printed, not marketing photography. Additionally, because production scales with demand rather than anticipating it, there is no overproduction waste baked into the price or the process.

At $7.99, this is the most affordable dedicated Trezor T mount available anywhere online. If you want to see what else CryptoCloaks builds for securing and displaying your hardware, browse other hardware wallet mounts in the full catalog. The same level of precision and bitcoin-native thinking goes into every product in the lineup.

Specs and Compatibility

If you already understand why hardware wallets matter for securing your bitcoin, you know that dedicated mounting is part of that discipline too. Keeping your Model T in a fixed, accessible position reduces handling, reduces risk, and keeps your setup clean. The Trezor T mount below is built with that operational mindset in mind.

• Dimensions: 9 × 6 × 1 inch
• Weight: 3 oz
• Material: 3D printed durable plastic
• Mounting Options: 4 #8 screws (permanent) or 3M adhesive tape (damage-free)
• Colors Available: Black, White
• Production: Made to order
• Compatibility: Trezor Model T only
• Price: $7.99
• Ships: 2-3 business days

How It Compares

The Trezor T mount from CryptoCloaks is not competing against other premium options. It is competing against generic Amazon docks, the included magnetic stand that ships with the Trezor itself, and charger docks that were never designed with the Model T in mind. Here is how it stacks up directly:

Frequently Asked Questions

Can I use this mount with the Trezor T’s included magnetic mount?

The CryptoCloaks Trezor T mount is a standalone solution and is not designed to interface with the magnetic stand included in the Trezor box. The magnetic stand that ships with the Trezor Model T uses a proprietary base system, which limits where and how you can position it. Most users find the included magnetic stand works fine on a flat desk but offers no real wall or vertical mounting path. The CryptoCloaks Trezor T mount bypasses that limitation entirely. You choose between four #8 screws for a permanent wall or surface installation, or 3M adhesive tape for a no-drill setup that still holds firm. If you want the magnetic option for travel or portability, keep it for that purpose. For a dedicated, fixed workspace position with more placement flexibility, the CryptoCloaks version is the better tool for the job.

Does the 3M tape option damage walls or desks, and is it removable?

3M adhesive tape, when applied and removed correctly, is designed to be damage-free on most clean, painted, and smooth surfaces. The removable adhesive category used with the Trezor T mount follows the same approach as the standard damage-free hanging solutions most people already use in their homes. That said, surface conditions vary. Older paint, textured walls, or certain desk finishes may respond differently than a clean modern surface. The standard approach is to press the mount firmly after applying, allow the adhesive to cure for at least 24 hours before loading your wallet into the holder, and when removing, pull the tape tab slowly at a low angle rather than yanking straight out from the wall. If you are uncertain about your specific surface, the screw mount option gives you a permanent installation path that does not rely on adhesive at all. Both options ship with the mount.

What is the difference between the screw mount and the screwless 3M tape option?

The screw mount uses four #8 screws to anchor the Trezor T mount directly into a wall stud, drywall anchor, or desk surface. This is the permanent option. It will not shift, flex, or move once installed, and it supports the weight of the Model T without any concern about adhesive fatigue over time. The 3M tape option skips the drilling entirely. You peel, press, and hold. It is the right choice for renters, temporary workspaces, or anyone who wants the flexibility to reposition the mount without putting holes in walls or surfaces. Both options come with the mount at checkout, so you are not sourcing hardware separately or hunting down the right adhesive strips on your own. You decide at installation which setup fits your specific situation, and everything you need is already in the package.

Order your Trezor T mount today and give your Model T a dedicated, secure home that fits your workspace. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Trezor T Mount appeared first on CryptoCloaks.

The Best Ledger Nano X Mount for Secure, Out-of-Sight Hardware Wallet Storage

Your Ledger Nano X sitting out in the open is a physical security risk that no passphrase can fix. The CryptoCloaks Ledger Nano X mount keeps your hardware wallet hidden, locked in place, and out of sight from anyone who shouldn’t know it’s there.

Table of Contents

• What Is the Ledger Nano X Mount
• Why CryptoCloaks
• Ledger Nano X Mount Specs and Compatibility
• How It Compares
• FAQ

What Is the Ledger Nano X Mount

The Ledger Nano X mount is a compact, low-profile holder that attaches your Nano X under a desk, behind a monitor, inside a cabinet, or anywhere away from plain sight. It ships from Ricky’s shop in America, 3D printed to order so the fit is exact every time, not stretched by mass production tolerances or warped from sitting in a warehouse.

Most people toss their hardware wallet in a drawer or leave it on a desk where anyone who walks into the room can see it. That’s an invitation for opportunistic theft. A well-placed Ledger Nano X mount takes the device off the surface entirely and puts it somewhere only you know to look. Reviewers consistently call out this low-profile placement as the main reason they bought it, specifically noting they wanted to hide the device from people who shouldn’t know it exists.

This is not a generic bracket. CryptoCloaks prints each Ledger Nano X mount fresh to your order using calibrated tolerances built around the actual dimensions of the Nano X. The device fits snugly. It doesn’t rattle. It doesn’t shift. It stays exactly where you put it.

Why CryptoCloaks Makes the Best Ledger Nano X Mount

CryptoCloaks has been in the bitcoin hardware space since 2017. Ricky personally handles every print and every shipment. When you buy a Ledger Nano X mount here, a real person who understands why self-custody matters is making it for you. There is no fulfillment center, no mystery about who packed your box, and no middleman inflating the price.

Two install methods come in a single SKU. Choose the screw version and #8 screws are included for a permanent, rigid mount to any wood or solid surface. Choose the screwless version and the 3M double-sided tape comes pre-installed on the back, ready to peel and press. Renters, anyone who can’t drill, and anyone setting up a temporary workstation all benefit from not having to source their own adhesive or figure out what sticks to their surface. No other Ledger Nano X mount on the market offers both methods this cleanly at this price.

Additionally, if you’re building out a full hardware wallet station, CryptoCloaks has options beyond the Nano X. Browse the complete collection of hard wallet mounts for Trezor and Ledger to find matching holders for every device in your setup.

Ledger Nano X Mount Specs and Compatibility

• SKU: CC-HW-LEDGNANOX
• Price: $7.99
• Weight: 1 oz
• Dimensions: 9 x 6 x 1 in
• Default Color: Black
• Mount Options: Screw (#8 screws included) or Screwless (3M double-sided tape pre-installed)
• Production Method: 3D printed to order in America
• Compatible Device: Ledger Nano X (sold separately)
• Device Included: No

This Ledger Nano X mount is purpose-built for the Ledger Nano X hardware wallet and is not compatible with the Nano S, Nano S Plus, or Stax. If you own one of those devices, check the other mounts in the CryptoCloaks catalog for the right fit. Ledger itself sells no mounting solution, so this product fills a gap the manufacturer ignores entirely.

How It Compares

Frequently Asked Questions

Will the Ledger Nano X stay secure if mounted upside down?

Yes. The CryptoCloaks Ledger Nano X mount is designed to hold your device firmly in any orientation, including inverted under a desk. The precision-fit cavity grips the Nano X snugly, so gravity alone will not pull it free during normal use. If you choose the screw version and mount it inverted, the #8 screws anchor the bracket rigidly to the surface, leaving no flex or shift. If you use the screwless version, the pre-installed 3M double-sided tape is rated for vertical and inverted surfaces and bonds strongly to wood, metal, and most finished materials. The device does not rattle, slide, or drop once seated. For permanent inverted installs in high-traffic areas, the screw version gives you the most confidence. Either way, the Ledger Nano X mount holds without compromise.

Does the screwless version come with the 3M tape already attached?

Yes. When you select the screwless option, the 3M double-sided tape comes pre-installed on the back of the Ledger Nano X mount at the time of printing. You do not need to buy tape separately, cut it to size, or research which adhesive works on your surface. CryptoCloaks handles that step during production so you receive a ready-to-install product. To mount it, peel the backing off the tape, press the bracket firmly against your chosen surface for 30 to 60 seconds, and you’re done. The adhesive is strong enough to hold the Nano X securely and designed to release from most surfaces without leaving damage if you ever need to reposition it. This makes the screwless Ledger Nano X mount the right choice for renters, setups where drilling isn’t allowed, and anyone who wants a clean, tool-free install.

What size screws do I need to install the Ledger Nano X mount?

The screw version of the Ledger Nano X mount uses #8 screws, which ship included in the package. You do not need to source any additional hardware. For standard wood desk and cabinet installations, a Phillips-head screwdriver is all you need to complete the install. The mounting holes are sized specifically for #8 screws. Using a different size risks stripping the printed material or producing a loose fit, so stick with what’s included. If you’re mounting to drywall without a stud, use a wall anchor rated for the load. The Ledger Nano X mount itself weighs 1 oz, and the Nano X adds minimal additional weight, so almost any standard anchor will exceed the requirement comfortably. When there’s any doubt about surface strength, mount to a solid wood or metal surface for the most secure and permanent hold.

The CryptoCloaks Ledger Nano X mount is $7.99 and made fresh to order every time. Add it to your cart and give your Nano X a home that keeps it out of sight and out of the wrong hands. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Ledger Nano X Mount appeared first on CryptoCloaks.

Your Ledger Nano S keeps ending up buried under cables, knocked sideways, or stuffed in a drawer between uses. A purpose-built ledger nano s mount fixes that immediately by giving your hardware wallet a stable, dedicated home right on your desk where it belongs.

Table of Contents

• What Is a Ledger Nano S Mount
• Why Buy a Ledger Nano S Mount from CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is a Ledger Nano S Mount

A ledger nano s mount is a 3D-printed holder designed to keep your Ledger Nano S hardware wallet upright, stable, and accessible at all times. Instead of leaving your device loose on a desk or dangling off a USB port, the mount gives it a fixed position you can rely on. You reach for it when you need it, return it when you are done.

CryptoCloaks manufactures this ledger nano s mount with tight tolerances calibrated specifically for the Ledger Nano S form factor. The fit is snug enough to hold the device firmly without putting stress on the casing, the USB connector, or the buttons. That precision matters when your device holds the private keys to your bitcoin.

Hardware wallet organization sounds like a small detail, but it pays off every single day. A fixed position means fewer unnecessary touches to the device and fewer moments hunting around your desk before a transaction. The ledger nano s mount is an inexpensive, practical upgrade to any serious bitcoin workspace. At $7.99, there is no reason to leave your wallet sitting in a random spot on your desk any longer.

Why Buy a Ledger Nano S Mount from CryptoCloaks

CryptoCloaks has been designing and printing bitcoin accessories since 2017. Ricky, the founder, personally handles every order from his shop in America. When you order a ledger nano s mount from CryptoCloaks, you are buying directly from someone who has been in the bitcoin space for years and uses the products he sells. Not a reseller. Not a dropshipper.

That history translates into design decisions you notice. Every piece ships in 2-3 business days, printed fresh for your order. CryptoCloaks accepts Bitcoin for payment, which means your entire transaction stays on-chain. For bitcoiners who think carefully about where their money goes, that alignment is a real differentiator.

CryptoCloaks also carries a full lineup of CryptoCloaks bitcoin accessories beyond the ledger nano s mount. You will find holders for popular mining hardware, cases for other wallet models, and a growing catalog of bitcoin-native desk and shelf gear. Every product in the store is built to the same standard of fit and finish.

Specs and Compatibility

This mount is built specifically for the original Ledger Nano S. Verify your device model before ordering. The Ledger Nano S Plus and Ledger Nano X have different physical dimensions and require their own dedicated holders. Fitting the wrong device into this mount produces a loose, unstable result that defeats the purpose.

• Compatible device: Ledger Nano S (original model)
• Material: High-quality PLA or PETG depending on color and option selected
• Print origin: Made in America
• Mounting style: Freestanding, flat-base desk or surface placement
• Price: $7.99
• Color options: Multiple available, see product selector above
• Fulfillment time: Ships in 2-3 business days from order date

The Ledger Nano S remains one of the most trusted hardware wallets among long-term bitcoin holders. Understanding why self-custody matters is foundational to responsible bitcoin ownership. You can start with the basics at Bitcoin.org, where the principles of holding your own keys are clearly laid out. A quality ledger nano s mount keeps that device organized and protected so you can practice self-custody without friction.

How It Compares

Generic holders sold through mass marketplaces are usually designed to accommodate multiple devices at once rather than one specific wallet. The result is a loose fit that lets your hardware wallet shift around or tip over. The CryptoCloaks ledger nano s mount is purpose-built for one device. That focus shows in how it holds.

Frequently Asked Questions

Will this ledger nano s mount work with the Ledger Nano S Plus or Ledger Nano X?

No. This ledger nano s mount is designed and calibrated for the original Ledger Nano S only. The Ledger Nano S Plus and Ledger Nano X both have different body dimensions and button layouts, so they require their own dedicated mounts. Using the wrong holder produces a loose, unreliable fit that defeats the purpose of having a mount in the first place. CryptoCloaks designs each product with device-specific tolerances so the fit is precise, not approximate. If you own a different Ledger model, check the CryptoCloaks store for the correct matching holder. Ordering the right version ensures your wallet sits secure and does not shift, tip, or wobble during normal desk use. When in doubt, confirm your exact Ledger model before completing your purchase.

How does the ledger nano s mount sit on my desk?

The ledger nano s mount uses a freestanding flat-base design that rests on any level surface without drilling, adhesive tape, or permanent hardware of any kind. Place it on your desk, nightstand, bookshelf, or workstation, drop your Ledger Nano S into the holder, and it stays put. The base geometry and device weight keep it stable during normal use. If you prefer a more permanent installation, the flat bottom is fully compatible with standard adhesive mounting pads you can source separately. This approach keeps the mount flexible. You can reposition it whenever your setup changes without leaving marks or damage on your furniture. The freestanding design also makes it easy to pack and travel with, which suits bitcoiners who carry their hardware wallet on the road.

Can I pay with Bitcoin when ordering this ledger nano s mount?

Yes. CryptoCloaks accepts Bitcoin for this ledger nano s mount and every other product in the store. Paying in bitcoin keeps your purchase fully on-chain from checkout to delivery, which lines up with the values most hardware wallet users already hold. CryptoCloaks has accepted Bitcoin since the beginning because Ricky built the store for bitcoiners first. To pay with Bitcoin, select the crypto payment option at checkout. The process is direct and does not require creating a separate account or routing through a processor that converts your sats to fiat before the shop receives them. Your payment goes to a bitcoin-native operation that has been part of this community since 2017 and keeps building products worth buying.

Bitcoin accepted. Made in America. Ships in 2-3 business days. Order your ledger nano s mount now and give your hardware wallet the secure, organized spot on your desk that it deserves.

The post Ledger Nano S Mount appeared first on CryptoCloaks.