GekkoScience KBox 22 TH/s Home Bitcoin Miner

The KBox takes the pieces that normally spread across a home-mining desk and puts them into one finished enclosure. There is no external controller, loose power brick, exposed hashboard, or separate network device to assemble. Connect power, join WiFi or Ethernet, open the browser-based dashboard, enter your pool information, and mine Bitcoin.

Inside are 18 BM1370 ASIC chips, an integrated 93%-efficient Mean Well power supply, a Linux mining controller, speed-controlled fans, active safety monitoring, a live stats display, and RGB lighting with 28 built-in modes. The fully enclosed steel-and-aluminum body is designed for a home, office, workshop, or dedicated Bitcoin room instead of an industrial mining facility.

Why the KBox is different

• Real home-mining hashrate: up to 22 TH/s from a desktop-sized enclosure.
• One-box setup: power supply, controller, networking, screen, cooling, and lighting are integrated.
• Three power levels: choose a quieter low-power profile, balanced medium mode, or full high mode.
• Quiet enough for occupied rooms: approximately 38 dB on low and 47 dB on high.
• Ethernet and dual-band WiFi: use a wired connection or 2.4GHz/5GHz wireless networking.
• Useful heat: turn the electrical input into roughly 607–1,099 BTU/hr of room heat while mining Bitcoin.
• Built-in visibility: see hashrate, temperature, power, pool status, fan speed, network information, and more without opening another device.
• Designed and built in America: assembled in the USA by GekkoScience.

KBox power modes, hashrate, heat, and noise

The KBox can be tuned for the room instead of forcing one fixed operating point. The figures below are practical preset targets; actual results vary with firmware, ambient temperature, chip quality, network configuration, and user tuning.

Nearly all miner power becomes room heat. BTU/hr values are watt-to-heat conversions, not an additional heater rating. GekkoScience also documents tuning headroom up to roughly 23 TH/s, 330W operation, and efficiency as low as approximately 13 J/TH under suitable tuning.

Integrated OLED Bitcoin mining display

The front display automatically rotates through useful live information, allowing the KBox to work as both a miner and a visible Bitcoin dashboard. Depending on firmware and selected display settings, it can show:

• Current hashrate and operating mode
• ASIC temperature and fan speed
• Power draw and efficiency
• Pool connection and share information
• Best share and blocks found
• Network SSID, signal strength, and local IP address
• Live Bitcoin price
• Bitcoin halving countdown

28 customizable RGB lighting modes

The KBox is meant to look good on a desk instead of hiding in a server closet. Its front RGB lighting includes 28 built-in effects with adjustable color, brightness, and animation speed. Choose a subtle ember glow, match the room, react to local weather, or let the front panel run a full animated light show.

Browser-based KBox dashboard

No separate computer is required after setup. The integrated Linux controller serves a local web interface where you can configure Bitcoin mining pools, view charts, select power presets, monitor hardware, tune performance, and control the RGB system.

Advanced users can adjust hashrate, efficiency, heat output, fan behavior, and lighting without rebuilding the miner around third-party controllers.

Built-in safety systems

The enclosed KBox includes several layers of protection intended for home operation:

• Active fan monitoring: hashing stops if either cooling fan stops.
• Double fuse protection: independent protection on the AC power supply and hashboard DC bus.
• Software thermal limits: ASIC temperature is actively monitored.
• Hardware regulator protection: the primary voltage-regulation system has its own thermal limits.
• Protected front grille: the 7mm hexagonal face grid restricts finger access while preserving airflow.
• Fully enclosed electronics: no exposed controller, hashboard, or loose desktop power brick.

As with any miner or space heater, keep the air intake and exhaust clear, place the KBox on a stable nonflammable surface, and do not enclose it in a cabinet without engineered ventilation.

GekkoScience KBox specifications

KBox vs smaller and larger home Bitcoin miners

The KBox sits in the middle of the home-mining range. It delivers roughly 3.7 times the hashrate of a 6 TH/s compact miner while staying far below the power draw of a 90 TH/s full-room heater miner.

• Choose the KBox when you want a polished all-in-one 22 TH/s desktop miner with Ethernet, dual-band WiFi, RGB lighting, and an integrated PSU.
• Choose the Canaan Avalon Nano 3S when lower price and lower power draw matter more than maximum desktop hashrate.
• Choose the Hammer Miner BC04 for a compact open-frame 6 TH/s home-mining setup with WiFi and Ethernet.
• Choose the Hammer Miner BC08 when you want approximately 12 TH/s from a quieter midrange desktop miner.
• Choose the Canaan Avalon Q when 90 TH/s matters more than compact size or low household power draw.

GekkoScience KBox setup

1. Place the KBox on a stable surface with clear intake and exhaust space.
2. Connect the AC power cable and switch the integrated PSU on.
3. Connect Ethernet or join a 2.4GHz/5GHz WiFi network.
4. Open the KBox local web interface from a device on the same network.
5. Enter your Bitcoin pool or solo-pool information and worker details.
6. Select Low, Medium, or High mode and confirm normal temperatures and fan operation.
7. Choose an RGB program, brightness, and effect speed if desired.

GekkoScience KBox FAQ

How much hashrate does the GekkoScience KBox produce?

The standard high-power target is approximately 22 TH/s. GekkoScience documents tuning headroom up to roughly 23 TH/s under suitable conditions.

How much power does the KBox use?

Preset operation is approximately 178W on Low, 242W on Medium, and 322W on High. User tuning can push operation to about 330W.

How loud is the KBox Bitcoin miner?

Published operating figures are approximately 38 dB on Low, 42 dB on Medium, and 47 dB on High. Room acoustics, fan tuning, ambient temperature, and measurement distance affect the number you hear.

Does the KBox include the power supply?

Yes. A 93%-efficient Mean Well power supply is integrated into the enclosure. You do not need a separate desktop power brick or external controller.

Does the KBox support WiFi and Ethernet?

Yes. The KBox supports Ethernet plus both 2.4GHz and 5GHz WiFi.

Can the KBox be used as a Bitcoin mining heater?

Yes. Depending on the selected power mode, it releases roughly 607–1,099 BTU/hr of heat into the room while mining Bitcoin. It is useful supplemental heat, not a replacement for properly sized primary heating equipment.

Can I solo mine with the GekkoScience KBox?

Yes. The KBox is a SHA-256 Bitcoin miner and can be configured for compatible Bitcoin mining pools or solo-pool infrastructure. Finding a block is probabilistic and never guaranteed.

Is Bitcoin mining with the KBox profitable?

Profitability changes with Bitcoin price, network difficulty, pool terms, uptime, selected tune, and your electricity rate. CryptoCloaks does not promise a fixed return or block result.

What RGB effects does the KBox include?

The onboard controller includes 28 lighting modes with user-adjustable colors, speed, and brightness. Examples include Embers, Woodstove, Rainbow, Breathe, weather-matching, and other animated effects.

What does the KBox screen display?

The front screen can rotate through hashrate, power, efficiency, temperature, fan speed, pool status, shares, network information, local IP, Bitcoin price, and halving countdown data.

What ASIC chips are in the KBox?

The KBox uses 18 BM1370 SHA-256 ASIC chips.

Where is the GekkoScience KBox made?

The KBox is designed and assembled in the United States.

Does the KBox have the hidden Doom Easter egg?

Yes. On supported firmware, open Settings and click the GekkoScience logo five times. Use the arrow keys to move and Control to shoot.

The post GekkoScience KBox 22 TH/s All-In-One Bitcoin Miner appeared first on CryptoCloaks.

The BC01 is the accessible Hammer Miner entry point: 1.5 TH/s in a tiny, quiet, low-power miner that makes Bitcoin mining easy to learn from a desk, office, or workshop.

In stock and shipping from Colorado.

Why CryptoCloaks is listing the Hammer Miner BC01

Home Bitcoin mining is moving fast, and the Hammer Miner line hits the exact lane we care about: compact gear, real SHA-256 mining, sane power draw, and hardware that fits on a desk instead of taking over the garage.

This page is built to give buyers the details that matter before ordering: hashrate, wattage, noise, shipping timing, included power, and where this miner fits in a home mining stack.

Key benefits

• 1.5 TH/s SHA-256 Bitcoin mining performance
• 23W max listed power draw
• 16 J/TH listed efficiency
• 38dB quiet desktop operation
• WiFi 2.4GHz connectivity
• Good fit for learning, testing, and low-power home mining

Specs

Best fit

• Home Bitcoin miners
• Desk or workshop mining setups
• Learning SHA-256 mining without industrial hardware
• Solo mining experiments
• Low-noise Bitcoin mining setups

Pre-order notes

This is a pre-order product. The source timeframe is included above so buyers know the expected shipping and availability window before checkout.

Need a different home miner? Compare this with the Hammer Miner BC04 or browse all CryptoCloaks Home Miners.

Frequently asked questions

Is the Hammer Miner BC01 good for learning Bitcoin mining?

Yes. The BC01 is built as a low-power home Bitcoin miner for learning, experimentation, and everyday desktop use.

When does the BC01 pre-order ship?

The source pre-order timeframe lists Shipping Date: June 17th, 2026 and Available on July 15, 2026.

How much power does the BC01 use?

The listed max power draw is 23W.

Does the BC01 use WiFi?

Yes. The BC01 listing includes WiFi 2.4GHz connectivity.

The post Hammer Miner BC01 | 1.5 TH/s Home Bitcoin Miner appeared first on CryptoCloaks.

The BC08 is the serious desktop option: 12 TH/s of SHA-256 Bitcoin mining at a 210W max draw, built for miners who want meaningful hashrate in a home or shop setup.

Pre-order window: 5 slots available. Shipping Date: Aug 1st. Available on August 1, 2026.

Why CryptoCloaks is listing the Hammer Miner BC08

Home Bitcoin mining is moving fast, and the Hammer Miner line hits the exact lane we care about: compact gear, real SHA-256 mining, sane power draw, and hardware that fits on a desk instead of taking over the garage.

This page is built to give buyers the details that matter before a pre-order: hashrate, wattage, noise, shipping timing, included power, and where this miner fits in a home mining stack.

Key benefits

• 12 TH/s SHA-256 Bitcoin mining performance
• 210W max power draw
• 17.5 J/TH listed efficiency
• 38dB quiet operation for desktop placement
• SOLO, PPLNS, and PPS mining modes
• 12V power system with included PSU

Specs

Best fit

• Home Bitcoin miners
• Desk or workshop mining setups
• Learning SHA-256 mining without industrial hardware
• Solo mining experiments
• Low-noise Bitcoin mining setups

Pre-order notes

This is a pre-order product. The source timeframe is included above so buyers know the expected shipping and availability window before checkout.

Need a different home miner? Compare this with the Hammer Miner BC04 or browse all CryptoCloaks Home Miners.

Frequently asked questions

Is the Hammer Miner BC08 good for home Bitcoin mining?

Yes. It is designed as a quiet desktop Bitcoin miner with 12 TH/s hashrate, 210W listed max draw, and 38dB operation.

When does the BC08 pre-order ship?

The source pre-order timeframe lists Shipping Date: Aug 1st and Available on August 1, 2026.

What mining algorithm does the BC08 use?

The BC08 mines SHA-256, the algorithm used by Bitcoin.

Does the BC08 include a power supply?

Yes. The listing specs state that a 12V/20A adapter is included.

The post Hammer Miner BC08 | 12 TH/s Desktop Bitcoin Miner appeared first on CryptoCloaks.

Table of Contents

Hammer Miner BC04 6 TH/s Home Bitcoin Miner

The Hammer Miner BC04 is built for the home Bitcoin miner who wants a real ASIC on the desk, not an industrial wind tunnel in the house. It targets around 6 TH/s of SHA-256 Bitcoin mining performance at about 110W, with an OLED stats screen, quiet cooling, and both WiFi and Ethernet onboard.

This is the kind of miner that makes sense for a shelf, office, workshop, garage bench, or apartment setup. Plug it in, connect it to your network, point it at your mining pool, and start stacking sats from home.

The BC04 matters because it sits in the sweet spot between tiny learning miners and big noisy farm hardware. You get enough hashrate to make the miner feel real, but the power draw stays low enough that normal home miners can actually live with it.

Why CryptoCloaks likes the BC04

• Real Bitcoin hashrate: about 6 TH/s SHA-256 performance in a compact desktop unit.
• Low power draw: roughly 110W stock operation, with tuned profiles reported around 120-125W.
• Home-friendly cooling: designed for quieter daily use compared with full-size industrial ASICs.
• Simple network setup: use 2.4GHz WiFi or RJ45 Ethernet.
• OLED stats screen: see miner status without digging through a dashboard every time.
• PSU included: comes with the power supply and cable shown in the product photos.

Hammer Miner BC04 specs

Good fit for

• Home Bitcoin mining
• Desk, garage, shelf, and office mining setups
• Apartment-friendly low-power mining
• Learning how ASIC mining and mining pools work
• Bitcoiners who want a compact miner instead of a warehouse machine

Setup Instructions

Compare with other home miners

If you want a quiet compact ASIC, this BC04 belongs in the same home mining lane as the Canaan Avalon Nano 3S and the rest of our Home Miners lineup. The point is simple: run a real Bitcoin miner at home without industrial noise or a giant power bill.

The Nano 3S is the heater-style favorite. The BC04 is the desk-friendly ASIC lane. Both are for people who want Bitcoin mining in a real house instead of a warehouse.

Want the broader home-mining setup angle? Read our home Bitcoin mining heater and home miner setup guide for airflow, heat, and room-planning basics.

Official Hammer Miner resources

For deeper technical digging, Hammer Miner maintains public BC04 firmware/UI repositories on GitHub: HammerMiner BC04-APP and HammerMiner BC04-WWW. We link those because buyers should be able to find the official project resources, not just another thin reseller page.

Need the deeper buyer breakdown? Read the full Hammer Miner BC04 review for home Bitcoin miners.

Hammer Miner BC04 FAQ

Can the Hammer Miner BC04 mine Bitcoin?

Yes. The Hammer Miner BC04 mines SHA-256 and is intended for Bitcoin mining.

How much hashrate does the Hammer Miner BC04 make?

The BC04 is listed around 6 TH/s, with tuned profiles reported up to about 6.5 TH/s depending on the unit and settings.

How much power does the Hammer Miner BC04 use?

Stock operation is around 110W. Tuned profiles are reported around 120-125W.

Does the BC04 support WiFi?

Yes. It supports 2.4GHz WiFi and RJ45 Ethernet.

Is this a good beginner Bitcoin miner?

Yes. It is a practical beginner-friendly ASIC because it is compact, low power, network-ready, and easier to live with than full-size industrial miners.

Does the Hammer Miner BC04 include a power supply?

Yes. The product photos and source listing show the BC04 shipping with the PSU and power cable.

Is the Hammer Miner BC04 quiet enough for a desk?

It is built for quiet desktop mining compared with industrial ASICs. Noise still depends on room temperature, firmware profile, airflow, and tuning, but this is a home-miner design, not a rack miner pretending to be friendly.

The post Hammer Miner BC04 | 6 TH/s Home Bitcoin Miner appeared first on CryptoCloaks.

The post Canaan Avalon Nano 3S Dual Cooler Box Bundle | 12 TH/s Bitcoin Mining Heater appeared first on CryptoCloaks.

Table of Contents

• What Is the Canaan Avalon Mini 3?
• Specs
• The Space Heater Angle
• Who It’s For
• How It Compares
• Setup & Connectivity
• Why Buy from CryptoCloaks
• FAQ

⚠️ Note: Gift cards are not accepted on miner purchases. Sorry in advance.

What Is the Canaan Avalon Mini 3?

The Canaan Avalon Mini 3 is the best mid-power Bitcoin home miner on the market right now. It delivers 37.5 TH/s of SHA-256 hashrate at just 800 watts — making it the sweet spot between the desktop-class BitAxe and a full industrial ASIC. It’s designed from the ground up for home use: low noise, built-in Wi-Fi, standard 110V–240V power, and a form factor that fits on a shelf.

It also heats your room. That’s not a marketing angle — at 800W of continuous power, the Canaan Avalon Mini 3 outputs real heat. Run it in a bedroom or office in winter, and your heating bill offsets part of your electricity cost. You’re not just mining Bitcoin — you’re replacing your space heater with something that stacks sats while it works.

Specs

For a deeper look at how the Canaan Avalon Mini 3 performs in real-world conditions, Hashrate Index has a thorough review. For up-to-date profitability calculations based on your electricity rate, NiceHash’s profitability calculator is the most accurate tool available.

The Space Heater Angle

Here’s the honest math: at $0.12–$0.16/kWh, the Canaan Avalon Mini 3 may not be printing profit on electricity alone right now — but it’s not meant to be evaluated that way.

If you’re heating a room anyway, you’re spending that electricity regardless. The Canaan Avalon Mini 3 replaces your dumb space heater with one that stacks Bitcoin 24/7. The heating is free. The mining is a bonus. That’s the play.

• 800W = meaningful room heat in a bedroom, office, or garage
• 33–55 dB noise level — quieter than most window AC units
• Works on standard US household outlets (110V)
• No special electrical work required

In winter months especially, the Canaan Avalon Mini 3 is one of the most rational home mining decisions you can make.

Who It’s For

• Home miners who want more hashrate than a BitAxe but don’t want a full industrial ASIC in their living room
• Space heater replacers — anyone already paying for heat who wants to stack sats while they do it
• Solo mining lottery players — 37.5 TH/s is real odds on CKPool. Not BitAxe odds. Actually meaningful.
• Citadel builders — people stacking infrastructure one machine at a time
• Gift buyers — the best Bitcoin gift you can give someone who already has everything

How It Compares

The Canaan Avalon Mini 3 sits right in the middle of the lineup — more hash than a desktop machine, far quieter and cheaper than a full-size ASIC. It’s the entry point for serious home miners who want real numbers.

Setup & Connectivity

The Canaan Avalon Mini 3 is designed for non-technical home users. Setup takes under 10 minutes:

1. Plug into standard outlet (110V–240V, no special wiring)
2. Connect via Wi-Fi or Ethernet to your home network
3. Open the web dashboard (IP address shown on device)
4. Enter your mining pool credentials (CKPool, Braiins, Ocean, or any SHA-256 pool)
5. Start hashing

CryptoCloaks recommends CKPool for solo mining — no registration required, and you keep 100% of the block reward if you find one. At 37.5 TH/s, your odds are real.

Why Buy from CryptoCloaks

• In stock, ships from Colorado — no 6-week wait from overseas distributors
• Bitcoin accepted — always. Pay in sats.
• Bitcoiners selling to Bitcoiners — we run these machines ourselves. We know what you’re buying.
• Accessories available — exhaust shrouds, fan adapters, and space heater mods to get the most out of your miner
• US-based support — real humans, fast replies

FAQ

Q: Does the Canaan Avalon Mini 3 work on a standard US outlet?
A: Yes. It runs on 110V–240V and doesn’t require any special electrical setup. Standard household outlet.

Q: How loud is it?
A: 33–55 dB depending on load. For reference, a normal conversation is ~60 dB. The Mini 3 is quieter than most window AC units. Bedroom-friendly.

Q: Is it profitable?
A: Depends on your electricity rate. At under $0.10/kWh it’s profitable on mining alone. At higher rates, treat it as a space heater that mines — the heating offsets your electricity cost, and the mining is on top. Use NiceHash’s calculator for your specific numbers.

Q: Can I solo mine with it?
A: Yes. Point it at CKPool for solo mining. At 37.5 TH/s you have real odds — not BitAxe lottery odds, but meaningful chances of finding a block. Expected time varies with network difficulty.

Q: Can I use it as my main space heater?
A: It outputs 800W of heat continuously. That’s solid for a bedroom, home office, or small room. Not a whole-house solution, but genuinely effective for a single room.

Q: Do you accept gift cards?
A: No — gift cards are not accepted on miner purchases.

Q: Do you accept Bitcoin?
A: Always.

The post Canaan Avalon Mini 3 37.5TH Bitcoin Home Mining Space Heater appeared first on CryptoCloaks.