Your ColdCard MK5 should not live loose in a drawer, sliding around your desk, or disappearing under a pile of cables. This CryptoCloaks ColdCard MK5 mount gives your Bitcoin hardware wallet a dedicated spot so it is organized, easy to reach, and ready when it is time to sign.

Printed by CryptoCloaks for bitcoiners who care about clean setups, this mount is a simple upgrade for a serious self-custody desk: low profile, practical, and built around the ColdCard MK5 form factor.

Table of Contents

• What Is the ColdCard MK5 Mount?
• Why a Dedicated MK5 Mount Matters
• ColdCard MK5 Mount Features
• Installation and Setup
• What It Fits
• Why CryptoCloaks
• FAQ

What Is the ColdCard MK5 Mount?

The CryptoCloaks ColdCard MK5 Mount is a 3D printed desk or wall mount designed to hold a ColdCard MK5 hardware wallet in a stable, repeatable place. It is made for people who actually use their ColdCard instead of treating self-custody gear like random junk in a drawer.

Use it near your signing workstation, on a shelf, in a cabinet, or anywhere you want your ColdCard MK5 to stay put without making your desk look like a fiat help desk exploded.

Why a Dedicated MK5 Mount Matters

• Keeps your ColdCard MK5 organized: no more hunting through drawers or desk clutter.
• Makes signing sessions cleaner: your device has a predictable home near your Bitcoin workstation.
• Protects the setup vibe: self-custody gear should look intentional, not tossed around.
• Simple, useful, no gimmicks: a practical mount for a practical Bitcoin tool.

ColdCard MK5 Mount Features

• Designed for the ColdCard MK5 hardware wallet
• 3D printed by CryptoCloaks
• Low-profile holder for desk, shelf, cabinet, or wall placement
• Helps keep your Bitcoin signing device visible and easy to grab
• Clean self-custody desk accessory for home offices, workshops, and Bitcoin setups
• Only $7.99

Installation and Setup

Place the mount where your ColdCard MK5 naturally belongs in your workflow. Depending on your setup, it can be positioned near your computer, signing station, safe area, or Bitcoin desk. Keep your device accessible when you need it and out of the random desk-junk danger zone when you do not.

This listing is for the mount only. ColdCard device, cables, tools, and any other accessories shown in photos are not included unless explicitly stated in the selected product option.

What It Fits

This page is for the ColdCard MK5 Mount. Match the mount to your exact ColdCard generation before ordering so your Bitcoin hardware wallet setup stays clean.

• Laser Etched ColdCard Wallet Cases and Sleeves
• Seedor Safe Starter Set for Bitcoin seed backup

Why CryptoCloaks

CryptoCloaks builds Bitcoin-native 3D printed accessories for people who actually use this stuff. The goal is not novelty plastic. The goal is useful shop-made gear that cleans up your setup, supports real self-custody, and looks like it belongs next to Bitcoin hardware.

If your ColdCard MK5 is part of your long-term Bitcoin plan, give it a real home.

FAQ

Does this fit the ColdCard MK5?

Yes. This product page is for the ColdCard MK5 Mount.

Does this listing include a ColdCard?

No. This listing is for the 3D printed mount only. The ColdCard device is not included.

Is this for the MK5 version?

Yes. This page is for the ColdCard MK5 Mount. Match your mount to your exact ColdCard generation before ordering.

Who is this for?

Bitcoiners who want their ColdCard MK5 organized, visible, and ready at their signing station instead of floating around loose on a desk.

Order the ColdCard MK5 Mount

Clean up the desk. Give the ColdCard MK5 a real spot. Keep your Bitcoin signing setup tight.

The post MK5 ColdCard Mount appeared first on CryptoCloaks.

Maximalist’s rejoice! Your favorite wallet finally has a mounting solution!

Info:
– #8 Screws (Screw) OR 3M Tape (Screwless)
– 3D Printed to order!

The post MK3 ColdCard Mount appeared first on CryptoCloaks.

ColdCard MK4 Mount: Purpose-Built for Your Bitcoin Hardware Wallet

Your ColdCard is sitting loose on a cluttered desk or rattling around in a drawer. That is no way to treat the device guarding your bitcoin. The ColdCard MK4 mount from CryptoCloaks puts your hardware wallet exactly where it belongs, locked in, organized, and ready when you need it.

Table of Contents

• What Is the ColdCard MK4 Mount
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the ColdCard MK4 Mount

The ColdCard MK4 mount is a 3D printed holder designed from the ground up to fit the Coinkite MK4 form factor. It holds your COLDCARD MK4 hardware wallet securely on a desk, shelf, under a monitor, or anywhere else in your setup. This is not a universal adapter or a generic slot that sort of fits. It was built for the MK4 specifically.

One verified buyer put it simply: the fit was “like an absolute glove.” That kind of feedback does not come from a generic holder. It comes from a product designed around the exact dimensions of the device it holds. CryptoCloaks confirmed that fit before putting it on the market, and customers continue to confirm it after the fact.

Additionally, the ColdCard MK4 mount works with both the original Coinkite clear sleeves and CryptoCloaks cases and sleeves. You do not have to strip your wallet bare just to dock it. That compatibility is intentional, not accidental, and it sets this product apart from any DIY solution you might cobble together.

Why CryptoCloaks

CryptoCloaks has been building bitcoin hardware accessories since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop. When you order a ColdCard MK4 mount from CryptoCloaks, it comes from a person who understands this space, not a dropshipper who does not know a ColdCard from a thumb drive.

Every mount is printed to order. That means fresh parts, not old shelf stock. It also means customization is on the table. Choose from 20 colors: Black, Cherry Red, Red, Orange, Yellow, White, Florescent Green, Green, Dark Green, Dark Blue, Blue, Clear, Beige, Bronze, Silver, Purple, Pink, Marble, Gold, and Teal. Add custom text engraving for an additional $3.00, which is a useful option for labeling wallets in a multisig setup or simply making the piece your own.

If you want a full protection solution alongside your mount, pair it with the ColdCard MK4 case and sleeve from CryptoCloaks. Both products are designed to work together. The mount fits whether your wallet is in a case or not, so you never have to choose between organized and protected.

Specs and Compatibility

The ColdCard MK4 mount ships ready to install. Full specifications are listed below.

• Price: $7.99 (on sale from $9.99)
• Weight: 3 oz
• Dimensions: 9 x 6 x 1 in
• Mount Method: #8 Screws or 3M Tape
• Default Color: Black
• Color Options: 20 colors including Black, Cherry Red, Teal, Marble, Gold, Purple, and more
• Custom Text Engraving: Available for +$3.00
• Compatibility: MK4 ColdCard with Original Clear Sleeves or CryptoCloaks Cases and Sleeves
• Production: 3D printed to order in the USA
• SKU: CC-HW-MK4COLDMOUN

The dual install system deserves a closer look. Screw mounting with standard #8 screws gives you a permanent, rock-solid installation on wood, drywall, or metal. The 3M tape option handles renters, shared workspaces, or any surface where drilling is not practical. No other purpose-built ColdCard MK4 mount on the market gives you both methods in a single product at this price point.

How It Compares

Coinkite sells the wallet but offers zero mounting or organization accessories. Generic DIY options exist, but none are fit-tested for the MK4 specifically. The ColdCard MK4 mount from CryptoCloaks is effectively the only purpose-built solution on the market. Here is how it stacks up.

Frequently Asked Questions

Does the ColdCard MK4 mount work with CryptoCloaks cases and sleeves on the wallet?

Yes. The ColdCard MK4 mount is designed to accommodate the MK4 with both the original Coinkite clear sleeves and CryptoCloaks cases and sleeves installed. Most generic holders require you to remove any case before docking your wallet, which adds friction to your daily routine and increases the risk of dropping or mishandling the device. CryptoCloaks built this mount to work with their own cases from the start, so the compatibility is tested and intentional, not a lucky coincidence. If you are running a CryptoCloaks case on your MK4, the mount accepts it without modification, forced fitting, or any compromise to the hold. You get organization and protection at the same time.

Can I mount this under a desk without screws?

Yes. The ColdCard MK4 mount fully supports 3M tape installation, which makes undersurface or screwless mounting straightforward. This is the right choice for renters, anyone in a shared office, or setups where drilling into a surface is not an option. The 3M tape method holds firmly on most clean, flat surfaces, including the underside of desks, the back panels of shelving units, and the stands of monitor arms. If you later need to relocate your setup, the tape removes cleanly from most surfaces without leaving residue or damage. Screw mounting with standard #8 screws remains available for those who want a fully permanent installation that does not flex or shift over time.

What screw size do I need to install the ColdCard MK4 mount?

The ColdCard MK4 mount uses standard #8 screws for permanent installation. This is one of the most common screw sizes available at any hardware store, so you will not need to track down specialty fasteners or order anything additional. The #8 size provides a solid, reliable hold on wood surfaces, drywall with appropriate anchors, and metal with the right hardware for the surface type. If drilling is not an option for your setup, the 3M tape method is a fully supported alternative that requires no tools and no fasteners at all. Both installation methods are designed to hold the mount firmly in a stationary workspace so your wallet stays secure and accessible during daily use.

Order your ColdCard MK4 mount today and give your hardware wallet a setup that reflects how seriously you take your bitcoin security. Choose from 20 colors, add custom engraving for $3.00, and get a purpose-built fit that no generic solution can match. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post MK4 ColdCard Mount appeared first on CryptoCloaks.