The post Canaan Nano 3 / Nano 3S Cooler Box | ASIC Miner Stand appeared first on CryptoCloaks.

Table of Contents

• What Is the Canaan Avalon Mini 3?
• Specs
• The Space Heater Angle
• Who It’s For
• How It Compares
• Setup & Connectivity
• Why Buy from CryptoCloaks
• FAQ

⚠️ Note: Gift cards are not accepted on miner purchases. Sorry in advance.

What Is the Canaan Avalon Mini 3?

The Canaan Avalon Mini 3 is the best mid-power Bitcoin home miner on the market right now. It delivers 37.5 TH/s of SHA-256 hashrate at just 800 watts — making it the sweet spot between the desktop-class BitAxe and a full industrial ASIC. It’s designed from the ground up for home use: low noise, built-in Wi-Fi, standard 110V–240V power, and a form factor that fits on a shelf.

It also heats your room. That’s not a marketing angle — at 800W of continuous power, the Canaan Avalon Mini 3 outputs real heat. Run it in a bedroom or office in winter, and your heating bill offsets part of your electricity cost. You’re not just mining Bitcoin — you’re replacing your space heater with something that stacks sats while it works.

Specs

For a deeper look at how the Canaan Avalon Mini 3 performs in real-world conditions, Hashrate Index has a thorough review. For up-to-date profitability calculations based on your electricity rate, NiceHash’s profitability calculator is the most accurate tool available.

The Space Heater Angle

Here’s the honest math: at $0.12–$0.16/kWh, the Canaan Avalon Mini 3 may not be printing profit on electricity alone right now — but it’s not meant to be evaluated that way.

If you’re heating a room anyway, you’re spending that electricity regardless. The Canaan Avalon Mini 3 replaces your dumb space heater with one that stacks Bitcoin 24/7. The heating is free. The mining is a bonus. That’s the play.

• 800W = meaningful room heat in a bedroom, office, or garage
• 33–55 dB noise level — quieter than most window AC units
• Works on standard US household outlets (110V)
• No special electrical work required

In winter months especially, the Canaan Avalon Mini 3 is one of the most rational home mining decisions you can make.

Who It’s For

• Home miners who want more hashrate than a BitAxe but don’t want a full industrial ASIC in their living room
• Space heater replacers — anyone already paying for heat who wants to stack sats while they do it
• Solo mining lottery players — 37.5 TH/s is real odds on CKPool. Not BitAxe odds. Actually meaningful.
• Citadel builders — people stacking infrastructure one machine at a time
• Gift buyers — the best Bitcoin gift you can give someone who already has everything

How It Compares

The Canaan Avalon Mini 3 sits right in the middle of the lineup — more hash than a desktop machine, far quieter and cheaper than a full-size ASIC. It’s the entry point for serious home miners who want real numbers.

Setup & Connectivity

The Canaan Avalon Mini 3 is designed for non-technical home users. Setup takes under 10 minutes:

1. Plug into standard outlet (110V–240V, no special wiring)
2. Connect via Wi-Fi or Ethernet to your home network
3. Open the web dashboard (IP address shown on device)
4. Enter your mining pool credentials (CKPool, Braiins, Ocean, or any SHA-256 pool)
5. Start hashing

CryptoCloaks recommends CKPool for solo mining — no registration required, and you keep 100% of the block reward if you find one. At 37.5 TH/s, your odds are real.

Why Buy from CryptoCloaks

• In stock, ships from Colorado — no 6-week wait from overseas distributors
• Bitcoin accepted — always. Pay in sats.
• Bitcoiners selling to Bitcoiners — we run these machines ourselves. We know what you’re buying.
• Accessories available — exhaust shrouds, fan adapters, and space heater mods to get the most out of your miner
• US-based support — real humans, fast replies

FAQ

Q: Does the Canaan Avalon Mini 3 work on a standard US outlet?
A: Yes. It runs on 110V–240V and doesn’t require any special electrical setup. Standard household outlet.

Q: How loud is it?
A: 33–55 dB depending on load. For reference, a normal conversation is ~60 dB. The Mini 3 is quieter than most window AC units. Bedroom-friendly.

Q: Is it profitable?
A: Depends on your electricity rate. At under $0.10/kWh it’s profitable on mining alone. At higher rates, treat it as a space heater that mines — the heating offsets your electricity cost, and the mining is on top. Use NiceHash’s calculator for your specific numbers.

Q: Can I solo mine with it?
A: Yes. Point it at CKPool for solo mining. At 37.5 TH/s you have real odds — not BitAxe lottery odds, but meaningful chances of finding a block. Expected time varies with network difficulty.

Q: Can I use it as my main space heater?
A: It outputs 800W of heat continuously. That’s solid for a bedroom, home office, or small room. Not a whole-house solution, but genuinely effective for a single room.

Q: Do you accept gift cards?
A: No — gift cards are not accepted on miner purchases.

Q: Do you accept Bitcoin?
A: Always.

The post Canaan Avalon Mini 3 37.5TH Bitcoin Home Mining Space Heater appeared first on CryptoCloaks.

The Canaan Avalon Nano 3S is a 6 TH/s home bitcoin miner that doubles as a space heater. 140W, air-cooled, plug-and-play. Mine bitcoin from your desk, office, or living room while it heats the space. Ships next business day from Colorado. Bitcoin accepted.

Canaan Avalon Nano 3S Specs

Mining Stats — April 2026

Setup

Plug in ethernet, connect power, open the web interface from any browser on your network, enter your pool details. Most users are mining within 15 minutes of unboxing. No drivers, no software installation, no command line required.

Works with all major Bitcoin mining pools. Recommended: Ocean Pool or Foundry USA for pooled mining. CKPool for solo mining — lottery-style, full block reward if you find one.

Why It Makes Sense as a Heater

140W of power draw produces 140W of heat — same as a small space heater. Instead of paying your electric bill to heat a room with nothing to show for it, the Canaan Avalon Nano 3S heats the room and stacks sats. In a cold garage, home office, or workshop, the heat value alone offsets a significant portion of the electricity cost.

Complete Your Setup

FAQ

What pool should I use with the Canaan Avalon Nano 3S?

For pooled mining (steady daily sats): Ocean Pool or Foundry USA. For solo mining: CKPool Solo.

Is the Canaan Avalon Nano 3S loud?

Quieter than a full-size ASIC but not silent. Fine in a home office or garage.

Does it work on standard US power?

Yes. Standard 110V/120V outlet. No special electrical setup required.

How does it compare to the BitAxe Gamma?

The BitAxe Gamma 601 runs 1.2 TH/s at 17W — whisper-quiet desktop solo miner. The Nano 3S runs 6 TH/s at 140W — more hashrate, more heat, more sats. Some people run both.

Can I mine other coins?

SHA-256 only. That’s Bitcoin.

The post Canaan Avalon Nano 3S — 6 TH/s Bitcoin Mining Heater appeared first on CryptoCloaks.

The Best Ledger Nano X Mount for Secure, Out-of-Sight Hardware Wallet Storage

Your Ledger Nano X sitting out in the open is a physical security risk that no passphrase can fix. The CryptoCloaks Ledger Nano X mount keeps your hardware wallet hidden, locked in place, and out of sight from anyone who shouldn’t know it’s there.

Table of Contents

• What Is the Ledger Nano X Mount
• Why CryptoCloaks
• Ledger Nano X Mount Specs and Compatibility
• How It Compares
• FAQ

What Is the Ledger Nano X Mount

The Ledger Nano X mount is a compact, low-profile holder that attaches your Nano X under a desk, behind a monitor, inside a cabinet, or anywhere away from plain sight. It ships from Ricky’s shop in America, 3D printed to order so the fit is exact every time, not stretched by mass production tolerances or warped from sitting in a warehouse.

Most people toss their hardware wallet in a drawer or leave it on a desk where anyone who walks into the room can see it. That’s an invitation for opportunistic theft. A well-placed Ledger Nano X mount takes the device off the surface entirely and puts it somewhere only you know to look. Reviewers consistently call out this low-profile placement as the main reason they bought it, specifically noting they wanted to hide the device from people who shouldn’t know it exists.

This is not a generic bracket. CryptoCloaks prints each Ledger Nano X mount fresh to your order using calibrated tolerances built around the actual dimensions of the Nano X. The device fits snugly. It doesn’t rattle. It doesn’t shift. It stays exactly where you put it.

Why CryptoCloaks Makes the Best Ledger Nano X Mount

CryptoCloaks has been in the bitcoin hardware space since 2017. Ricky personally handles every print and every shipment. When you buy a Ledger Nano X mount here, a real person who understands why self-custody matters is making it for you. There is no fulfillment center, no mystery about who packed your box, and no middleman inflating the price.

Two install methods come in a single SKU. Choose the screw version and #8 screws are included for a permanent, rigid mount to any wood or solid surface. Choose the screwless version and the 3M double-sided tape comes pre-installed on the back, ready to peel and press. Renters, anyone who can’t drill, and anyone setting up a temporary workstation all benefit from not having to source their own adhesive or figure out what sticks to their surface. No other Ledger Nano X mount on the market offers both methods this cleanly at this price.

Additionally, if you’re building out a full hardware wallet station, CryptoCloaks has options beyond the Nano X. Browse the complete collection of hard wallet mounts for Trezor and Ledger to find matching holders for every device in your setup.

Ledger Nano X Mount Specs and Compatibility

• SKU: CC-HW-LEDGNANOX
• Price: $7.99
• Weight: 1 oz
• Dimensions: 9 x 6 x 1 in
• Default Color: Black
• Mount Options: Screw (#8 screws included) or Screwless (3M double-sided tape pre-installed)
• Production Method: 3D printed to order in America
• Compatible Device: Ledger Nano X (sold separately)
• Device Included: No

This Ledger Nano X mount is purpose-built for the Ledger Nano X hardware wallet and is not compatible with the Nano S, Nano S Plus, or Stax. If you own one of those devices, check the other mounts in the CryptoCloaks catalog for the right fit. Ledger itself sells no mounting solution, so this product fills a gap the manufacturer ignores entirely.

How It Compares

Frequently Asked Questions

Will the Ledger Nano X stay secure if mounted upside down?

Yes. The CryptoCloaks Ledger Nano X mount is designed to hold your device firmly in any orientation, including inverted under a desk. The precision-fit cavity grips the Nano X snugly, so gravity alone will not pull it free during normal use. If you choose the screw version and mount it inverted, the #8 screws anchor the bracket rigidly to the surface, leaving no flex or shift. If you use the screwless version, the pre-installed 3M double-sided tape is rated for vertical and inverted surfaces and bonds strongly to wood, metal, and most finished materials. The device does not rattle, slide, or drop once seated. For permanent inverted installs in high-traffic areas, the screw version gives you the most confidence. Either way, the Ledger Nano X mount holds without compromise.

Does the screwless version come with the 3M tape already attached?

Yes. When you select the screwless option, the 3M double-sided tape comes pre-installed on the back of the Ledger Nano X mount at the time of printing. You do not need to buy tape separately, cut it to size, or research which adhesive works on your surface. CryptoCloaks handles that step during production so you receive a ready-to-install product. To mount it, peel the backing off the tape, press the bracket firmly against your chosen surface for 30 to 60 seconds, and you’re done. The adhesive is strong enough to hold the Nano X securely and designed to release from most surfaces without leaving damage if you ever need to reposition it. This makes the screwless Ledger Nano X mount the right choice for renters, setups where drilling isn’t allowed, and anyone who wants a clean, tool-free install.

What size screws do I need to install the Ledger Nano X mount?

The screw version of the Ledger Nano X mount uses #8 screws, which ship included in the package. You do not need to source any additional hardware. For standard wood desk and cabinet installations, a Phillips-head screwdriver is all you need to complete the install. The mounting holes are sized specifically for #8 screws. Using a different size risks stripping the printed material or producing a loose fit, so stick with what’s included. If you’re mounting to drywall without a stud, use a wall anchor rated for the load. The Ledger Nano X mount itself weighs 1 oz, and the Nano X adds minimal additional weight, so almost any standard anchor will exceed the requirement comfortably. When there’s any doubt about surface strength, mount to a solid wood or metal surface for the most secure and permanent hold.

The CryptoCloaks Ledger Nano X mount is $7.99 and made fresh to order every time. Add it to your cart and give your Nano X a home that keeps it out of sight and out of the wrong hands. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Ledger Nano X Mount appeared first on CryptoCloaks.

Your Ledger Nano S keeps ending up buried under cables, knocked sideways, or stuffed in a drawer between uses. A purpose-built ledger nano s mount fixes that immediately by giving your hardware wallet a stable, dedicated home right on your desk where it belongs.

Table of Contents

• What Is a Ledger Nano S Mount
• Why Buy a Ledger Nano S Mount from CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is a Ledger Nano S Mount

A ledger nano s mount is a 3D-printed holder designed to keep your Ledger Nano S hardware wallet upright, stable, and accessible at all times. Instead of leaving your device loose on a desk or dangling off a USB port, the mount gives it a fixed position you can rely on. You reach for it when you need it, return it when you are done.

CryptoCloaks manufactures this ledger nano s mount with tight tolerances calibrated specifically for the Ledger Nano S form factor. The fit is snug enough to hold the device firmly without putting stress on the casing, the USB connector, or the buttons. That precision matters when your device holds the private keys to your bitcoin.

Hardware wallet organization sounds like a small detail, but it pays off every single day. A fixed position means fewer unnecessary touches to the device and fewer moments hunting around your desk before a transaction. The ledger nano s mount is an inexpensive, practical upgrade to any serious bitcoin workspace. At $7.99, there is no reason to leave your wallet sitting in a random spot on your desk any longer.

Why Buy a Ledger Nano S Mount from CryptoCloaks

CryptoCloaks has been designing and printing bitcoin accessories since 2017. Ricky, the founder, personally handles every order from his shop in America. When you order a ledger nano s mount from CryptoCloaks, you are buying directly from someone who has been in the bitcoin space for years and uses the products he sells. Not a reseller. Not a dropshipper.

That history translates into design decisions you notice. Every piece ships in 2-3 business days, printed fresh for your order. CryptoCloaks accepts Bitcoin for payment, which means your entire transaction stays on-chain. For bitcoiners who think carefully about where their money goes, that alignment is a real differentiator.

CryptoCloaks also carries a full lineup of CryptoCloaks bitcoin accessories beyond the ledger nano s mount. You will find holders for popular mining hardware, cases for other wallet models, and a growing catalog of bitcoin-native desk and shelf gear. Every product in the store is built to the same standard of fit and finish.

Specs and Compatibility

This mount is built specifically for the original Ledger Nano S. Verify your device model before ordering. The Ledger Nano S Plus and Ledger Nano X have different physical dimensions and require their own dedicated holders. Fitting the wrong device into this mount produces a loose, unstable result that defeats the purpose.

• Compatible device: Ledger Nano S (original model)
• Material: High-quality PLA or PETG depending on color and option selected
• Print origin: Made in America
• Mounting style: Freestanding, flat-base desk or surface placement
• Price: $7.99
• Color options: Multiple available, see product selector above
• Fulfillment time: Ships in 2-3 business days from order date

The Ledger Nano S remains one of the most trusted hardware wallets among long-term bitcoin holders. Understanding why self-custody matters is foundational to responsible bitcoin ownership. You can start with the basics at Bitcoin.org, where the principles of holding your own keys are clearly laid out. A quality ledger nano s mount keeps that device organized and protected so you can practice self-custody without friction.

How It Compares

Generic holders sold through mass marketplaces are usually designed to accommodate multiple devices at once rather than one specific wallet. The result is a loose fit that lets your hardware wallet shift around or tip over. The CryptoCloaks ledger nano s mount is purpose-built for one device. That focus shows in how it holds.

Frequently Asked Questions

Will this ledger nano s mount work with the Ledger Nano S Plus or Ledger Nano X?

No. This ledger nano s mount is designed and calibrated for the original Ledger Nano S only. The Ledger Nano S Plus and Ledger Nano X both have different body dimensions and button layouts, so they require their own dedicated mounts. Using the wrong holder produces a loose, unreliable fit that defeats the purpose of having a mount in the first place. CryptoCloaks designs each product with device-specific tolerances so the fit is precise, not approximate. If you own a different Ledger model, check the CryptoCloaks store for the correct matching holder. Ordering the right version ensures your wallet sits secure and does not shift, tip, or wobble during normal desk use. When in doubt, confirm your exact Ledger model before completing your purchase.

How does the ledger nano s mount sit on my desk?

The ledger nano s mount uses a freestanding flat-base design that rests on any level surface without drilling, adhesive tape, or permanent hardware of any kind. Place it on your desk, nightstand, bookshelf, or workstation, drop your Ledger Nano S into the holder, and it stays put. The base geometry and device weight keep it stable during normal use. If you prefer a more permanent installation, the flat bottom is fully compatible with standard adhesive mounting pads you can source separately. This approach keeps the mount flexible. You can reposition it whenever your setup changes without leaving marks or damage on your furniture. The freestanding design also makes it easy to pack and travel with, which suits bitcoiners who carry their hardware wallet on the road.

Can I pay with Bitcoin when ordering this ledger nano s mount?

Yes. CryptoCloaks accepts Bitcoin for this ledger nano s mount and every other product in the store. Paying in bitcoin keeps your purchase fully on-chain from checkout to delivery, which lines up with the values most hardware wallet users already hold. CryptoCloaks has accepted Bitcoin since the beginning because Ricky built the store for bitcoiners first. To pay with Bitcoin, select the crypto payment option at checkout. The process is direct and does not require creating a separate account or routing through a processor that converts your sats to fiat before the shop receives them. Your payment goes to a bitcoin-native operation that has been part of this community since 2017 and keeps building products worth buying.

Bitcoin accepted. Made in America. Ships in 2-3 business days. Order your ledger nano s mount now and give your hardware wallet the secure, organized spot on your desk that it deserves.

The post Ledger Nano S Mount appeared first on CryptoCloaks.