The Bitaxe 6AMP Power Supply is a simple spare or replacement power adapter for compatible Bitaxe home Bitcoin miners. If your Bitaxe power brick is missing, tired, damaged, or you want a backup on the bench, this is the practical part to keep around.

This adapter is rated for 5V / 6A / 30W, which is the common power lane used by many Bitaxe-style small ASIC mining builds. It is meant for compatible miners that use a 5V DC barrel-style input.

Why keep a spare Bitaxe power supply?

• Easy replacement: swap out a missing or failing Bitaxe power brick.
• Bench-ready spare: handy if you test, tune, move, or travel with small miners.
• Home mining part: small support gear that keeps a Bitaxe setup online.
• Correct output lane: 5V / 6A / 30W for compatible 5V Bitaxe miners.

Specs

Compatibility notes

This is intended for compatible Bitaxe miners that require 5V power. Many Bitaxe Gamma, Supra, Ultra, and similar builds use this 5V 6A power lane, but you should still check your miner before ordering. Match the voltage, current requirement, and connector style on your specific unit.

Do not use this on miners that require 12V, USB-C PD-only input, XT30 input, or a different voltage/current setup. Wrong power supplies can damage hardware.

Good fit for

• Bitaxe power supply replacement
• Bitaxe spare power adapter
• Home Bitcoin mining repair kits
• Small ASIC bench testing
• Keeping a backup power brick in the shop

FAQ

Is this a Bitaxe replacement power supply?

Yes. This is a replacement or spare power supply for compatible Bitaxe miners that use 5V / 6A power.

What output is this Bitaxe power adapter?

It is rated at 5V / 6A / 30W.

Will this work with every Bitaxe?

No. Check your exact miner input first. This is for compatible 5V Bitaxe setups, not every miner or every power connector.

Is this for Bitcoin mining?

Yes. It is a support part for compatible Bitaxe home Bitcoin miners.

The post Bitaxe 6AMP Power Supply appeared first on CryptoCloaks.

Table of Contents

Hammer Miner BC04 Stand for a cleaner home Bitcoin mining setup

The Hammer Miner BC04 Stand is a 3D printed desktop mount built for the Hammer Miner BC04. It holds the miner at a clean working angle so the fan face, board, OLED screen, power side, and cable routing stay easier to see and reach on a desk, shelf, workbench, or home mining rack.

If you already have the BC04 and just want the printed stand setup, this listing keeps it simple. Pick your colors, choose any combination at the same price, and give the miner a stable spot instead of leaving it loose on the desk.

Case Color and Stand Color options

Choose a Case Color and a Stand Color. Any color combo is $12.00.

• Case Color: choose the printed BC04 frame/case color.
• Stand Color: choose the angled base/stand color.
• No price games: standard colors, galaxy colors, carbon fiber, and fade colors stay the same price.

What is included

• 1x CryptoCloaks Hammer Miner BC04 Stand/frame set in your selected Case Color and Stand Color

What is not included

• Hammer Miner BC04 miner
• Fan, PSU, power cable, USB/network cables, or any mining hardware
• Pool setup, firmware setup, or mining support beyond the printed accessory

Compatibility

This stand is made for the Hammer Miner BC04. It is not a universal ASIC stand, not a BC01 stand, and not a BC08 stand. For the miner itself, see the Hammer Miner BC04 product page. For other printed mining accessories, browse Home Mining Shrouds Etc.

FAQ

Does this include the Hammer Miner BC04?

No. This product is the 3D printed BC04 stand/frame set only. The miner shown in photos is for fit and display reference.

Can I choose both colors?

Yes. Choose the Case Color and Stand Color at checkout. The price stays $12.00 for any color combination.

Does this fit the BC01 or BC08?

No. This listing is for the Hammer Miner BC04. Use a model-specific stand for other Hammer Miner models.

Where should I use it?

It is meant for a desk, shelf, workbench, garage bench, or home mining area where you want the BC04 upright, stable, and easier to access.

The post Hammer Miner BC04 Stand appeared first on CryptoCloaks.

The ColdCard Mk5 Dock is a 3D printed desktop stand built for bitcoiners who want a cleaner self-custody desk. Instead of laying your ColdCard loose on the table and chasing a cable every time you need to sign, this dock gives your Mk5 a dedicated home with a USB-C to USB-C cable built into the dock.

Set the dock near your computer, choose your printed color, and keep the connector ready. The exposed USB-C plug sits inside the stand so the ColdCard Mk5 can drop into place for a cleaner hardware wallet workflow.

Why this ColdCard Mk5 dock exists

A ColdCard Mk5 is a serious Bitcoin self-custody tool. The desk setup around it should be just as intentional. This dock keeps the wallet upright, easier to see, and easier to connect without adding another loose cable to the pile.

• Designed for ColdCard Mk5: shaped as a dedicated desktop dock/stand for the Mk5 form factor.
• Built-in USB-C to USB-C cable: the cable is part of the dock setup, with the connector positioned for easy plug-in.
• Clean signing station: keeps your hardware wallet upright, organized, and ready for Bitcoin transactions.
• 3D printed by CryptoCloaks: made in-house for real Bitcoin self-custody setups.
• Any color, same price: choose your dock color at checkout. Color does not change the $7.99 price.

What is included

• 1x CryptoCloaks ColdCard Mk5 Dock in your selected color
• 1x built-in USB-C to USB-C cable installed/routed with the dock

What is not included

• ColdCard Mk5 hardware wallet
• Computer, laptop, or other signing device

Compatibility

This dock is made for the ColdCard Mk5. It is built around a USB-C connection and is intended as a desktop hardware wallet stand for Bitcoin signing setups.

If you need a different holder, check the full Hard Wallet Mounts category for other CryptoCloaks hardware wallet mounts.

FAQ

Does this include a ColdCard Mk5?

No. This listing is for the 3D printed dock with built-in USB-C to USB-C cable only. The ColdCard hardware wallet is not included.

Does the dock include the USB-C cable?

Yes. This version has a USB-C to USB-C cable built into the dock setup.

Does color change the price?

No. Pick the color you want. Every color option is $7.99.

Is this a wall mount?

No. This is a desktop dock/stand for keeping your ColdCard Mk5 upright and easier to plug in near your computer.

Is this official Coinkite/Coldcard hardware?

No. This is a CryptoCloaks 3D printed dock designed for ColdCard Mk5 owners. ColdCard/Coinkite hardware wallet is not included.

The post ColdCard Mk5 Dock – USB-C Hardware Wallet Stand appeared first on CryptoCloaks.

The Trezor Safe 7 Dock is a 3D printed desktop stand built to hold your Trezor Safe 7 at a comfortable angle while making the USB-C connection easier to reach. Instead of laying the wallet flat, chasing the cable around your desk, or leaving it loose between signing sessions, this dock gives the device a simple home base.

Why this dock exists

The Trezor Safe 7 is a serious self-custody tool. The setup around it should feel just as intentional. This dock keeps the wallet upright, stable, and ready to connect to your computer using the USB-C cable that comes with the hardware wallet.

• Designed for Trezor Safe 7: shaped to hold the device nicely without a generic phone-stand fit.
• USB-C cable channel: routes the cable through the front of the dock for a cleaner plug-in setup.
• Desktop friendly: keeps the hardware wallet visible, organized, and easier to grab when it is time to sign.
• 3D printed by CryptoCloaks: made for Bitcoiners who care about their self-custody workspace.
• Color selectable: choose the dock color at checkout. Color does not change the price.

What is included

• 1x CryptoCloaks Trezor Safe 7 Dock in your selected color

What is not included

• Trezor Safe 7 hardware wallet
• USB-C cable

Compatibility

This dock is made for the Trezor Safe 7. It uses the USB-C cable that comes with the hardware wallet. If you need a different holder, check the full Hard Wallet Mounts category for other CryptoCloaks hardware wallet mounts.

FAQ

Does this include the Trezor Safe 7?

No. This listing is for the 3D printed dock only. The hardware wallet is shown for fit/reference and is not included.

Does it include a USB-C cable?

No. It is designed to use the USB-C cable that comes with the Trezor Safe 7.

Does color change the price?

No. Pick the color you want. The dock price stays the same.

Is this a wall mount?

No. This is a desktop dock/stand made to hold the Safe 7 upright near your computer.

The post Trezor Safe 7 Dock – USB-C Hardware Wallet Stand appeared first on CryptoCloaks.

The BC01 is the accessible Hammer Miner entry point: 1.5 TH/s in a tiny, quiet, low-power miner that makes Bitcoin mining easy to learn from a desk, office, or workshop.

Pre-order window: 5 slots available. Shipping Date: June 17th, 2026. Available on July 15, 2026.

Why CryptoCloaks is listing the Hammer Miner BC01

Home Bitcoin mining is moving fast, and the Hammer Miner line hits the exact lane we care about: compact gear, real SHA-256 mining, sane power draw, and hardware that fits on a desk instead of taking over the garage.

This page is built to give buyers the details that matter before a pre-order: hashrate, wattage, noise, shipping timing, included power, and where this miner fits in a home mining stack.

Key benefits

• 1.5 TH/s SHA-256 Bitcoin mining performance
• 23W max listed power draw
• 16 J/TH listed efficiency
• 38dB quiet desktop operation
• WiFi 2.4GHz connectivity
• Good fit for learning, testing, and low-power home mining

Specs

Best fit

• Home Bitcoin miners
• Desk or workshop mining setups
• Learning SHA-256 mining without industrial hardware
• Solo mining experiments
• Low-noise Bitcoin mining setups

Pre-order notes

This is a pre-order product. The source timeframe is included above so buyers know the expected shipping and availability window before checkout.

Need a different home miner? Compare this with the Hammer Miner BC04 or browse all CryptoCloaks Home Miners.

Frequently asked questions

Is the Hammer Miner BC01 good for learning Bitcoin mining?

Yes. The BC01 is built as a low-power home Bitcoin miner for learning, experimentation, and everyday desktop use.

When does the BC01 pre-order ship?

The source pre-order timeframe lists Shipping Date: June 17th, 2026 and Available on July 15, 2026.

How much power does the BC01 use?

The listed max power draw is 23W.

Does the BC01 use WiFi?

Yes. The BC01 listing includes WiFi 2.4GHz connectivity.

The post Hammer Miner BC01 | 1.5 TH/s Home Bitcoin Miner appeared first on CryptoCloaks.

The BC08 is the serious desktop option: 12 TH/s of SHA-256 Bitcoin mining at a 210W max draw, built for miners who want meaningful hashrate in a home or shop setup.

Pre-order window: 5 slots available. Shipping Date: Aug 1st. Available on August 1, 2026.

Why CryptoCloaks is listing the Hammer Miner BC08

Home Bitcoin mining is moving fast, and the Hammer Miner line hits the exact lane we care about: compact gear, real SHA-256 mining, sane power draw, and hardware that fits on a desk instead of taking over the garage.

This page is built to give buyers the details that matter before a pre-order: hashrate, wattage, noise, shipping timing, included power, and where this miner fits in a home mining stack.

Key benefits

• 12 TH/s SHA-256 Bitcoin mining performance
• 210W max power draw
• 17.5 J/TH listed efficiency
• 38dB quiet operation for desktop placement
• SOLO, PPLNS, and PPS mining modes
• 12V power system with included PSU

Specs

Best fit

• Home Bitcoin miners
• Desk or workshop mining setups
• Learning SHA-256 mining without industrial hardware
• Solo mining experiments
• Low-noise Bitcoin mining setups

Pre-order notes

This is a pre-order product. The source timeframe is included above so buyers know the expected shipping and availability window before checkout.

Need a different home miner? Compare this with the Hammer Miner BC04 or browse all CryptoCloaks Home Miners.

Frequently asked questions

Is the Hammer Miner BC08 good for home Bitcoin mining?

Yes. It is designed as a quiet desktop Bitcoin miner with 12 TH/s hashrate, 210W listed max draw, and 38dB operation.

When does the BC08 pre-order ship?

The source pre-order timeframe lists Shipping Date: Aug 1st and Available on August 1, 2026.

What mining algorithm does the BC08 use?

The BC08 mines SHA-256, the algorithm used by Bitcoin.

Does the BC08 include a power supply?

Yes. The listing specs state that a 12V/20A adapter is included.

The post Hammer Miner BC08 | 12 TH/s Desktop Bitcoin Miner appeared first on CryptoCloaks.

Table of Contents

Hammer Miner BC04 6 TH/s Home Bitcoin Miner

The Hammer Miner BC04 is built for the home Bitcoin miner who wants a real ASIC on the desk, not an industrial wind tunnel in the house. It targets around 6 TH/s of SHA-256 Bitcoin mining performance at about 110W, with an OLED stats screen, quiet cooling, and both WiFi and Ethernet onboard.

This is the kind of miner that makes sense for a shelf, office, workshop, garage bench, or apartment setup. Plug it in, connect it to your network, point it at your mining pool, and start stacking sats from home.

The BC04 matters because it sits in the sweet spot between tiny learning miners and big noisy farm hardware. You get enough hashrate to make the miner feel real, but the power draw stays low enough that normal home miners can actually live with it.

Why CryptoCloaks likes the BC04

• Real Bitcoin hashrate: about 6 TH/s SHA-256 performance in a compact desktop unit.
• Low power draw: roughly 110W stock operation, with tuned profiles reported around 120-125W.
• Home-friendly cooling: designed for quieter daily use compared with full-size industrial ASICs.
• Simple network setup: use 2.4GHz WiFi or RJ45 Ethernet.
• OLED stats screen: see miner status without digging through a dashboard every time.
• PSU included: comes with the power supply and cable shown in the product photos.

Hammer Miner BC04 specs

Good fit for

• Home Bitcoin mining
• Desk, garage, shelf, and office mining setups
• Apartment-friendly low-power mining
• Learning how ASIC mining and mining pools work
• Bitcoiners who want a compact miner instead of a warehouse machine

Setup Instructions

Compare with other home miners

If you want a quiet compact ASIC, this BC04 belongs in the same home mining lane as the Canaan Avalon Nano 3S and the rest of our Home Miners lineup. The point is simple: run a real Bitcoin miner at home without industrial noise or a giant power bill.

The Nano 3S is the heater-style favorite. The BC04 is the desk-friendly ASIC lane. Both are for people who want Bitcoin mining in a real house instead of a warehouse.

Want the broader home-mining setup angle? Read our home Bitcoin mining heater and home miner setup guide for airflow, heat, and room-planning basics.

Official Hammer Miner resources

For deeper technical digging, Hammer Miner maintains public BC04 firmware/UI repositories on GitHub: HammerMiner BC04-APP and HammerMiner BC04-WWW. We link those because buyers should be able to find the official project resources, not just another thin reseller page.

Need the deeper buyer breakdown? Read the full Hammer Miner BC04 review for home Bitcoin miners.

Hammer Miner BC04 FAQ

Can the Hammer Miner BC04 mine Bitcoin?

Yes. The Hammer Miner BC04 mines SHA-256 and is intended for Bitcoin mining.

How much hashrate does the Hammer Miner BC04 make?

The BC04 is listed around 6 TH/s, with tuned profiles reported up to about 6.5 TH/s depending on the unit and settings.

How much power does the Hammer Miner BC04 use?

Stock operation is around 110W. Tuned profiles are reported around 120-125W.

Does the BC04 support WiFi?

Yes. It supports 2.4GHz WiFi and RJ45 Ethernet.

Is this a good beginner Bitcoin miner?

Yes. It is a practical beginner-friendly ASIC because it is compact, low power, network-ready, and easier to live with than full-size industrial miners.

Does the Hammer Miner BC04 include a power supply?

Yes. The product photos and source listing show the BC04 shipping with the PSU and power cable.

Is the Hammer Miner BC04 quiet enough for a desk?

It is built for quiet desktop mining compared with industrial ASICs. Noise still depends on room temperature, firmware profile, airflow, and tuning, but this is a home-miner design, not a rack miner pretending to be friendly.

The post Hammer Miner BC04 | 6 TH/s Home Bitcoin Miner appeared first on CryptoCloaks.

Your ColdCard MK5 should not live loose in a drawer, sliding around your desk, or disappearing under a pile of cables. This CryptoCloaks ColdCard MK5 mount gives your Bitcoin hardware wallet a dedicated spot so it is organized, easy to reach, and ready when it is time to sign.

Printed by CryptoCloaks for bitcoiners who care about clean setups, this mount is a simple upgrade for a serious self-custody desk: low profile, practical, and built around the ColdCard MK5 form factor.

Table of Contents

• What Is the ColdCard MK5 Mount?
• Why a Dedicated MK5 Mount Matters
• ColdCard MK5 Mount Features
• Installation and Setup
• What It Fits
• Why CryptoCloaks
• FAQ

What Is the ColdCard MK5 Mount?

The CryptoCloaks ColdCard MK5 Mount is a 3D printed desk or wall mount designed to hold a ColdCard MK5 hardware wallet in a stable, repeatable place. It is made for people who actually use their ColdCard instead of treating self-custody gear like random junk in a drawer.

Use it near your signing workstation, on a shelf, in a cabinet, or anywhere you want your ColdCard MK5 to stay put without making your desk look like a fiat help desk exploded.

Why a Dedicated MK5 Mount Matters

• Keeps your ColdCard MK5 organized: no more hunting through drawers or desk clutter.
• Makes signing sessions cleaner: your device has a predictable home near your Bitcoin workstation.
• Protects the setup vibe: self-custody gear should look intentional, not tossed around.
• Simple, useful, no gimmicks: a practical mount for a practical Bitcoin tool.

ColdCard MK5 Mount Features

• Designed for the ColdCard MK5 hardware wallet
• 3D printed by CryptoCloaks
• Low-profile holder for desk, shelf, cabinet, or wall placement
• Helps keep your Bitcoin signing device visible and easy to grab
• Clean self-custody desk accessory for home offices, workshops, and Bitcoin setups
• Only $7.99

Installation and Setup

Place the mount where your ColdCard MK5 naturally belongs in your workflow. Depending on your setup, it can be positioned near your computer, signing station, safe area, or Bitcoin desk. Keep your device accessible when you need it and out of the random desk-junk danger zone when you do not.

This listing is for the mount only. ColdCard device, cables, tools, and any other accessories shown in photos are not included unless explicitly stated in the selected product option.

What It Fits

This page is for the ColdCard MK5 Mount. Match the mount to your exact ColdCard generation before ordering so your Bitcoin hardware wallet setup stays clean.

• Laser Etched ColdCard Wallet Cases and Sleeves
• Seedor Safe Starter Set for Bitcoin seed backup

Why CryptoCloaks

CryptoCloaks builds Bitcoin-native 3D printed accessories for people who actually use this stuff. The goal is not novelty plastic. The goal is useful shop-made gear that cleans up your setup, supports real self-custody, and looks like it belongs next to Bitcoin hardware.

If your ColdCard MK5 is part of your long-term Bitcoin plan, give it a real home.

FAQ

Does this fit the ColdCard MK5?

Yes. This product page is for the ColdCard MK5 Mount.

Does this listing include a ColdCard?

No. This listing is for the 3D printed mount only. The ColdCard device is not included.

Is this for the MK5 version?

Yes. This page is for the ColdCard MK5 Mount. Match your mount to your exact ColdCard generation before ordering.

Who is this for?

Bitcoiners who want their ColdCard MK5 organized, visible, and ready at their signing station instead of floating around loose on a desk.

Order the ColdCard MK5 Mount

Clean up the desk. Give the ColdCard MK5 a real spot. Keep your Bitcoin signing setup tight.

The post MK5 ColdCard Mount appeared first on CryptoCloaks.

The post Canaan Avalon Nano 3S Dual Cooler Box Bundle | 12 TH/s Bitcoin Mining Heater appeared first on CryptoCloaks.

Vault price: 2,500,000 sats. Availability: 1 left.

This listing is browsable on CryptoCloaks; purchase and inventory are handled through the BTCPay Vault checkout.

The post Pepegotchi – Gold Infinity/21 appeared first on CryptoCloaks.