The Bitaxe 6AMP Power Supply is a simple spare or replacement power adapter for compatible Bitaxe home Bitcoin miners. If your Bitaxe power brick is missing, tired, damaged, or you want a backup on the bench, this is the practical part to keep around.

This adapter is rated for 5V / 6A / 30W, which is the common power lane used by many Bitaxe-style small ASIC mining builds. It is meant for compatible miners that use a 5V DC barrel-style input.

Why keep a spare Bitaxe power supply?

• Easy replacement: swap out a missing or failing Bitaxe power brick.
• Bench-ready spare: handy if you test, tune, move, or travel with small miners.
• Home mining part: small support gear that keeps a Bitaxe setup online.
• Correct output lane: 5V / 6A / 30W for compatible 5V Bitaxe miners.

Specs

Compatibility notes

This is intended for compatible Bitaxe miners that require 5V power. Many Bitaxe Gamma, Supra, Ultra, and similar builds use this 5V 6A power lane, but you should still check your miner before ordering. Match the voltage, current requirement, and connector style on your specific unit.

Do not use this on miners that require 12V, USB-C PD-only input, XT30 input, or a different voltage/current setup. Wrong power supplies can damage hardware.

Good fit for

• Bitaxe power supply replacement
• Bitaxe spare power adapter
• Home Bitcoin mining repair kits
• Small ASIC bench testing
• Keeping a backup power brick in the shop

FAQ

Is this a Bitaxe replacement power supply?

Yes. This is a replacement or spare power supply for compatible Bitaxe miners that use 5V / 6A power.

What output is this Bitaxe power adapter?

It is rated at 5V / 6A / 30W.

Will this work with every Bitaxe?

No. Check your exact miner input first. This is for compatible 5V Bitaxe setups, not every miner or every power connector.

Is this for Bitcoin mining?

Yes. It is a support part for compatible Bitaxe home Bitcoin miners.

The post Bitaxe 6AMP Power Supply appeared first on CryptoCloaks.

Table of Contents

Hammer Miner BC04 Stand for a cleaner home Bitcoin mining setup

The Hammer Miner BC04 Stand is a 3D printed desktop mount built for the Hammer Miner BC04. It holds the miner at a clean working angle so the fan face, board, OLED screen, power side, and cable routing stay easier to see and reach on a desk, shelf, workbench, or home mining rack.

If you already have the BC04 and just want the printed stand setup, this listing keeps it simple. Pick your colors, choose any combination at the same price, and give the miner a stable spot instead of leaving it loose on the desk.

Case Color and Stand Color options

Choose a Case Color and a Stand Color. Any color combo is $12.00.

• Case Color: choose the printed BC04 frame/case color.
• Stand Color: choose the angled base/stand color.
• No price games: standard colors, galaxy colors, carbon fiber, and fade colors stay the same price.

What is included

• 1x CryptoCloaks Hammer Miner BC04 Stand/frame set in your selected Case Color and Stand Color

What is not included

• Hammer Miner BC04 miner
• Fan, PSU, power cable, USB/network cables, or any mining hardware
• Pool setup, firmware setup, or mining support beyond the printed accessory

Compatibility

This stand is made for the Hammer Miner BC04. It is not a universal ASIC stand, not a BC01 stand, and not a BC08 stand. For the miner itself, see the Hammer Miner BC04 product page. For other printed mining accessories, browse Home Mining Shrouds Etc.

FAQ

Does this include the Hammer Miner BC04?

No. This product is the 3D printed BC04 stand/frame set only. The miner shown in photos is for fit and display reference.

Can I choose both colors?

Yes. Choose the Case Color and Stand Color at checkout. The price stays $12.00 for any color combination.

Does this fit the BC01 or BC08?

No. This listing is for the Hammer Miner BC04. Use a model-specific stand for other Hammer Miner models.

Where should I use it?

It is meant for a desk, shelf, workbench, garage bench, or home mining area where you want the BC04 upright, stable, and easier to access.

The post Hammer Miner BC04 Stand appeared first on CryptoCloaks.

CryptoCloaks is developing a custom stand and case specifically for the Turbo Touch’s new form factor. We’ve been first with accessories for every major BitAxe release — this one’s no different.

Coming soon. Drop your email below to get notified when it’s live, or check back soon.

Made in Colorado on Bambu printers. Bitcoin accepted. 25+ color options.

The post BitAxe Turbo Touch Stand & Case | CryptoCloaks appeared first on CryptoCloaks.

The Dual Bitaxe Gamma Case – Mini PC Gaming Rig Edition turns your miners into a tiny desktop powerhouse that looks ready to run max settings… but instead it’s busy stacking sats. Built to house two Bitaxe Gamma units, this case gives your setup that sleek mini-gaming-PC aesthetic while keeping everything tidy and display-worthy.

Best part? You’re the builder here. With full color customization options, you can match your setup, your battle station, your brand, or your chaotic gamer personality. Clean, loud, stealthy, or neon — it’s your rig, your rules.

Why you’ll love it:
Holds two Bitaxe Gamma units in one compact case
Styled like a miniature gaming PC tower
Custom color options to match your setup or vibe
Keeps your desk looking intentional instead of “DIY lab experiment”
A guaranteed conversation starter for gamers, miners, and curious coworkers

Because if you’re going to mine at home, you might as well look like you’re winning. 🎯⚡

Other parts you’ll want:
– 2X – 60mm Fans (Noctua or others)
– Fan adapters if you don’t get Noctuas

The post Bitaxe Triton Dual Gamma Gaming Rig Case appeared first on CryptoCloaks.

The Canaan Nano 3 / Nano 3S Cooler Box turns a messy home-mining stack into a clean, serviceable Bitcoin mining setup. It is built for the regular Canaan Avalon Nano 3 and the Avalon Nano 3S, with 2-unit and 4-unit versions available. Instead of letting tiny miners sit flat on a desk, fight for air, and drag cables everywhere, this box gives each unit a proper stand, a shared airflow path, and cable routing that looks intentional.

This product is the cooler box only. Canaan miners are not included. Choose the 2-unit or 4-unit layout, then select whether you want fans, controller, and an exhaust shroud included. Base pricing starts at $50 for the 2-unit cooler box without fans or shroud. Fan and shroud options change the final price in the selector above.

Canaan Nano 3 cooler box and Canaan Nano 3S cooler box compatibility

The CryptoCloaks cooler box fits both generations Ricky keeps getting asked about: the regular Canaan Avalon Nano 3 and the Canaan Avalon Nano 3S. Canaan lists the Avalon Nano 3 at up to 4 TH/s with configurable power modes and the Avalon Nano 3S at 6 TH/s and 140W. Both are small enough for desks, shelves, garages, offices, and mining corners, but both get cleaner when they are mounted with airflow and wire management in mind.

What this ASIC miner stand fixes

• Airflow: gives the Nano 3 or Nano 3S stack a cleaner cooling path than loose miners sitting flat on a table.
• Wire management: routes power, network, fan, and controller cables instead of letting everything pile up behind the miners.
• Multi-unit layout: supports 2 or 4 Canaan Nano 3 or Nano 3S units in one organized cooler box.
• Optional exhaust control: add a 6 inch or 8 inch exhaust shroud when you want to push warm air away from the shelf or desk.
• Shop-built parts: printed by CryptoCloaks in Colorado for home miners who care what the setup looks like.

Available options

• 2-unit cooler box: best for a small desk, shelf, bedroom, or starter home-mining setup.
• 4-unit cooler box: best for stacking multiple Nano miners in a cleaner garage, office, or shop corner.
• Fans and controller: optional. Select yes if you want a ready cooling package, or select no if you already have your own Noctua-style fan plan.
• Exhaust shroud: optional 6 inch or 8 inch shroud, color matched to the case when selected.

Specs and fitment

• Fits: Canaan Avalon Nano 3 and Canaan Avalon Nano 3S
• Capacity: 2 miners or 4 miners depending on selected version
• Cooling: 140mm fan mount support with optional fan/controller bundle
• Shroud options: none, 6 inch, or 8 inch exhaust shroud
• Product type: 3D printed cooler box, dock, stand, and wire-management enclosure
• Made by: CryptoCloaks in Colorado

Why not use a basic Nano 3 dock?

A basic Canaan Nano 3 dock or Nano 3S stand mostly holds one miner upright. That is better than nothing, but it does not solve the full home-mining mess. This cooler box is made for the way people actually run small Bitcoin miners at home: multiple units, power bricks, fans, controllers, Ethernet or Wi-Fi, and a limited amount of desk or shelf space. The goal is simple: cooler miners, cleaner cables, and a setup that does not look like a science project collapsed behind your monitor.

Related CryptoCloaks Nano products

If you need the miner too, see the Canaan Avalon Nano 3S. If you want the complete miner-plus-cooler setup, see the Canaan Avalon Nano 3S Dual Cooler Box Bundle.

FAQ

Does this fit the regular Canaan Avalon Nano 3?

Yes. This cooler box fits the regular Canaan Avalon Nano 3 and the Canaan Avalon Nano 3S.

Are the Canaan miners included?

No. This product is the CryptoCloaks cooler box, dock, stand, and wire-management enclosure. Miners are sold separately unless you buy one of the complete bundle listings.

Should I choose the 2-unit or 4-unit version?

Choose 2-unit if you are running a small desk or shelf setup. Choose 4-unit if you already have multiple Nano miners or plan to expand the stack.

Do I need fans and a controller?

If you want the simplest cooling setup, choose the fan and controller option. If you already have your own fan plan, select the no-fans option and use your preferred 140mm fans.

What is the exhaust shroud for?

The exhaust shroud helps direct warm air away from the cooler box. It is useful when the miners sit near a wall, shelf, desk, or window vent path.

The post Canaan Nano 3 / Nano 3S Cooler Box | ASIC Miner Stand appeared first on CryptoCloaks.

The post GekkoAxe GT 2xBM1370 Solo Miner Custom Case appeared first on CryptoCloaks.

Your Avalon Q is dumping hot exhaust straight into your room, raising ambient inlet temps and quietly throttling performance before you ever check the dashboard. The Canaan Avalon Q exhaust shroud from CryptoCloaks is the direct fix: a precision-engineered PETG duct adapter that connects your miner’s rear exhaust to standard flex duct in under five minutes, with zero tools required.

Table of Contents

• What Is the Canaan Avalon Q Exhaust Shroud
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the Canaan Avalon Q Exhaust Shroud

The Canaan Avalon Q exhaust shroud is an in-house engineered duct adapter built specifically for the rear exhaust port of Canaan’s Avalon Q bitcoin miner. CryptoCloaks designed this part from scratch. It is the original shroud for this miner, not a copy of a competitor’s part or a scaled-up generic adapter. The shroud channels hot exhaust airflow directly into a 6-inch or 8-inch flex duct run, so you can push that heat outside, into a garage, or into a dedicated exhaust system.

Without a proper exhaust adapter, the Avalon Q pushes a high volume of hot air into the surrounding space. That heat recirculates as inlet air, raises operating temperatures, and forces the miner to work harder over time. The Canaan Avalon Q exhaust shroud creates a sealed, low-resistance exhaust path that keeps inlet temps stable and your miner running in its optimal thermal window.

Material selection is not an afterthought here. PLA softens at relatively low temperatures and can warp or deform when exposed to sustained hot exhaust from a running ASIC. PETG maintains structural integrity in exactly this kind of thermal environment. CryptoCloaks prints every Canaan Avalon Q exhaust shroud in PETG, not whatever thermoplastic is cheapest or easiest to run on a print farm.

Why CryptoCloaks

CryptoCloaks has been engineering bitcoin mining accessories since 2017. Ricky, the founder, personally designs, prints, and ships every order from his shop. When the Avalon Q reached the market, CryptoCloaks was the first to develop a dedicated exhaust shroud for it. That original design now carries 16 verified five-star reviews, with zero reported fitment issues or heat-related failures across all of them.

The Canaan Avalon Q exhaust shroud mounts directly onto two existing rear screws on the Avalon Q chassis. No drilling. No adhesive. No modification to your hardware, period. If you need to service the miner or move it to a new location, the shroud comes off in seconds. This reversible, tool-free approach is deliberate: home miners need parts that adapt to their setup, not parts that permanently alter expensive equipment.

CryptoCloaks also offers a full catalog of home mining accessories for ASIC miners, so you can build out your entire home mining setup with parts sourced from one proven, bitcoin-native maker. Every product in the line ships from the same hands that engineered it.

Specs and Compatibility

The Canaan Avalon Q exhaust shroud arrives ready to install. No separate hardware kit is needed. Select your duct size and color at checkout:

• Compatible miner: Canaan Avalon Q bitcoin miner
• Duct outlet options: 6-inch or 8-inch (select at checkout)
• Material: PETG (heat-resistant thermoplastic)
• Available colors: Orange, Yellow, White, Black
• Install time: Under 5 minutes
• Mounting: Slips over two existing rear screws on the Avalon Q, no drilling required
• Origin: Made in America
• Price: $24.99
• SKU: CC-MA-CANAAVALQ
• Rating: 5.00 out of 5 stars (16 verified reviews)

For full details on the Avalon Q’s thermal design, airflow specs, and hardware layout, see the Canaan Avalon Q official specs and cooling system page directly from Canaan.

How It Compares

The Canaan Avalon Q exhaust shroud is the originator in this product category. Some copies have appeared since CryptoCloaks released the design, and a DIY print file exists on Reddit. Here is a direct comparison of what each option actually delivers:

The DIY Reddit file option requires you to own a printer, source PETG correctly, dial in print settings for a functional fit, and do your own quality control. The competing commercial copy ships an unverified design with no public review history and no named maker behind it. The CryptoCloaks version ships tested, proven, and backed by 16 customers who have already run it on their hardware.

Frequently Asked Questions

Does this shroud fit both 6-inch and 8-inch flex duct?

Yes. The Canaan Avalon Q exhaust shroud is offered in two distinct versions: one with a 6-inch outlet collar and one with an 8-inch outlet collar. You select your preferred duct size at checkout before adding to cart. Both versions share the same rear mounting interface and the same installation process, so the only practical difference between them is the collar diameter. Standard 6-inch and 8-inch flexible aluminum or insulated duct from any hardware store connects directly to the outlet without adapters. If you are unsure which size fits your setup, the 6-inch version suits most typical residential installs. The 8-inch version is the better choice for longer duct runs or where minimizing static pressure matters, since the larger diameter moves the same volume of air with less resistance.

How does the Canaan Avalon Q exhaust shroud attach, and does it require any drilling or tools?

The Canaan Avalon Q exhaust shroud slips directly onto two existing rear screws on the Avalon Q chassis. No drilling, no adhesive, and no tools are required at any step of the installation. The mounting points are the factory screws already present on the back of the miner, so the install does not modify your hardware in any way. The full process takes under five minutes from opening the package to having your flex duct connected and secured. Removal is equally fast. Because the shroud leaves no permanent mark on the miner, it is safe to use on units still under warranty or units you plan to resell. This tool-free, reversible mounting approach reflects how CryptoCloaks designs every product in its mining accessories line.

Is PETG safe to use near the heat output of the Avalon Q?

PETG is specifically well suited to this application. The material has a glass transition temperature well above what the Avalon Q’s exhaust air reaches under normal operating conditions. PLA, by contrast, has a significantly lower glass transition temperature and can soften, deform, or warp when exposed to sustained hot exhaust airflow from a running ASIC. This is not a hypothetical risk: PLA parts have failed in similar applications, causing ducts to detach or seal poorly over time. CryptoCloaks uses PETG across its ASIC accessory line precisely because it holds its shape in thermal environments where PLA cannot. Every Canaan Avalon Q exhaust shroud that leaves CryptoCloaks is printed in PETG, not substituted with a cheaper filament to reduce production cost.

Pick your size, pick your color, and put your Avalon Q’s exhaust where it belongs: outside your room. The Canaan Avalon Q exhaust shroud is in stock, engineered by the team that built the original design, and ships direct from Ricky’s shop. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post Canaan Avalon Q Exhaust Shroud – 6″ or 8″ Duct | 3D Printed Bitcoin Miner Cooling appeared first on CryptoCloaks.

The post The Bitaxe V8 Case appeared first on CryptoCloaks.

You already own the miner. What you should not have to do is buy a whole new bundle just to get a decent stand for it. The NerdQaxe++ stand from CryptoCloaks is the only purpose-built mount for your NerdAxe Q++ that you can order on its own, in the color you actually want, with a rear fan slot built right in.

Table of Contents

• What Is the NerdQaxe++ Stand
• Why CryptoCloaks
• Specs and Compatibility
• How It Compares
• FAQ

What Is the NerdQaxe++ Stand

The NerdQaxe++ stand is a custom 3D-printed accessory designed specifically for the NerdAxe Q++ open-source bitcoin miner. CryptoCloaks engineers this mount to hold your hardware securely, maintain clean airflow around the board, and simplify cable routing. It arrives ready to use, no assembly required beyond setting your miner in place.

This is not a flat metal bracket stamped in a factory and tossed into a box. CryptoCloaks prints every stand in-house, in America, using quality filament available in over 25 colors. Solid blacks, metallic finishes, and dual-color gradient fades like Blue/Purple and Black/Red give you real options. Your stand should match your setup, not whatever the manufacturer had lying around.

The NerdQaxe++ stand also solves a problem no competitor has addressed: active rear cooling. The built-in 80mm fan slot at the back of the stand lets you add a standard fan for a genuine dual-cooling upgrade. For miners running in tight spaces or warm environments, that slot is worth more than any color choice.

Why CryptoCloaks Makes the Best NerdQaxe++ Stand

CryptoCloaks has been building bitcoin hardware accessories since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop in America. When you order a NerdQaxe++ stand, a real person handles it from print bed to shipping label. That matters in a space full of drop-shipped generic parts.

The 80mm rear fan slot separates this stand from everything else on the market. Competitor stands are metal brackets with no consideration for active cooling. The NerdQaxe++ stand accepts standard 80mm fans and adapters right out of the box. That means you upgrade your cooling without buying new hardware or 3D printing adapters yourself.

Color customization is the other clear advantage. With 25+ options including gradient fades and metallic finishes, you get a stand that looks intentional rather than incidental. A custom top label is available for an additional $10.00 if you want your setup branded or personalized. Browse the full range of Bitaxe accessories for solo miners to complete your build.

Specs and Compatibility

• SKU: CC-BA-NERDQSTAN
• Price: $14.99
• Weight: 8 oz
• Dimensions: 7 x 5 x 4 inches
• Rear fan slot: 80mm (compatible with standard fans and adapters)
• Color options: 25+ including solid, metallic, and dual-color gradient fades
• Custom top label: Available, +$10.00
• Miner included: No. Stand only.
• Brand: CryptoCloaks
• Made in: America

The NerdQaxe++ stand ships as a standalone product. If you already run a NerdAxe Q++ and want a proper mount without sourcing a new miner bundle, this is the direct path. For full hardware context on the device this stand supports, see the NerdAxe open-source hardware project on GitHub.

No bundles. No upsells. Just the stand at a straightforward price.

How It Compares

Every major competitor bundles their stand with the miner purchase. That model works for first-time buyers but leaves existing miners with no standalone replacement option and zero say in finish or features. The NerdQaxe++ stand breaks that pattern completely.

Solo Satoshi, Altair Technology, and Power Mining all include a stand with their miner purchase. However, none sell it separately. None offer color options. None include a fan slot. The NerdQaxe++ stand covers all three gaps at $14.99, a price point most miners spend on a single shipping label.

Frequently Asked Questions

Does the NerdAxe Q++ miner come included with this stand?

No. The NerdQaxe++ stand is sold as a standalone accessory only. The miner itself is not included in this listing. CryptoCloaks designed this product specifically for miners who already own a NerdAxe Q++ unit and want a proper mount without repurchasing the miner or finding a bundle they do not need. If you are building a fresh setup, source the NerdAxe Q++ miner through the appropriate channels first. Once you have the hardware, the NerdQaxe++ stand drops right in and provides a stable, color-matched base that generic metal bundle stands cannot replicate. At $14.99, it is one of the most cost-effective hardware upgrades available for this specific miner.

Can I mount an 80mm fan to the back of the NerdQaxe++ stand for extra cooling?

Yes. The NerdQaxe++ stand includes a rear-facing 80mm fan slot built directly into the design. It accepts standard 80mm fans and common adapters out of the box. You do not need to modify anything or source specialty hardware to make it work. Active rear cooling is one of the most requested features for solo mining setups, particularly in warmer rooms or tightly packed rack configurations. Adding an 80mm fan to the back of your NerdQaxe++ stand creates a dual-cooling path that pushes fresh air across the board more aggressively than passive convection alone. This is a genuine hardware advantage over every bundled metal stand currently available, none of which include a fan slot of any size.

What colors are available for the NerdQaxe++ stand case and base?

CryptoCloaks offers 25+ color options for the NerdQaxe++ stand, covering solid colors, metallic finishes, and dual-color gradient fades. Popular gradient options include Blue/Purple and Black/Red, though the full palette is selectable at checkout. No competitor offers any color customization on their stand because every competing option is a stamped metal accessory shipped as part of a bundle. CryptoCloaks 3D prints every NerdQaxe++ stand in-house, which means color selection is a real, functional option rather than a marketing claim. A custom top label is also available for an additional $10.00 if you want to personalize the surface with your own text or logo. Live color availability displays in the product configurator during checkout.

Order your NerdQaxe++ stand today and get a purpose-built mount that fits your miner, your cooling setup, and your aesthetic. Bitcoin accepted. Made in America. Ships in 2-3 business days.

The post NerdAxe Q++ Stand appeared first on CryptoCloaks.

An easy fix is to reach out to
@CryptoCloaks
and have them print you a cover for it. This will keep things like little fingers, pets, dust away from the open terminals and it looks sweet as well.

The picture is from their shop as they just finished it today. I’ll share another picture with the complete PS setup once it’s arrived and installed on the PS.

Thanks @CryptoCloaks You guys are gems in the coal field!”
– NoBro

The post Mean Well LSR-350-5 Terminal Cover appeared first on CryptoCloaks.