Blockstream Jade Plus Case: Flexible TPU Squish Protection for $6.99
Your Jade Plus is a serious piece of hardware you carry, travel with, and rely on. Leaving it unprotected in a pocket or bag is how screens get scratched and buttons get worn down. The CryptoCloaks Blockstream Jade Plus case is a precision 3D-printed TPU 95 shell that fits your device exactly and keeps it protected without getting in the way.
Table of Contents
What Is the Jade Plus Squish Case
The Squish Case is a custom-designed Blockstream Jade Plus case built from TPU 95, a thermoplastic polyurethane that flexes under pressure and returns to shape. CryptoCloaks modeled this case around the exact dimensions of the Jade Plus, not a rough approximation of a similarly-sized device. The result is a tight, accurate fit with cutouts positioned precisely where they need to be.
TPU 95 occupies the right middle ground between rigid plastic and soft silicone. Hard plastic cases absorb impact by cracking. Generic silicone sleeves tend to fit loosely, shift around in your pocket, and often interfere with button access because the cutouts were never built around this specific device. TPU 95 flexes enough to snap on with minimal effort, then stays firm enough to protect against drops and daily friction.
CryptoCloaks offers this case in three colors: Orange, Black, and Clear. Each option weighs just 2 oz, so you are not adding bulk to your carry setup. At $6.99, it is one of the most affordable purpose-built cases available for the Jade Plus, and unlike generic alternatives, it was engineered for this device from the start.
Why CryptoCloaks Builds the Right Blockstream Jade Plus Case
CryptoCloaks has been producing precision 3D-printed bitcoin hardware accessories since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop in America. This Blockstream Jade Plus case is not a resold generic product. It is a CryptoCloaks original built to the tolerances that award-winning 3D printing equipment allows.
Verified buyers confirm that button access is fully unrestricted with the Squish Case fitted. That is a critical detail. A case that partially covers or stiffens button response turns a useful accessory into a daily irritation. CryptoCloaks designs for actual use, meaning every cutout placement is tested against the real device before the design goes into production.
If you are running other bitcoin hardware that also needs protection, check out our other hardware wallet cases. CryptoCloaks covers a wide range of devices with the same custom-fit philosophy applied to every design in the lineup.
Specs and Compatibility
This Blockstream Jade Plus case ships ready to use. No adhesives, no assembly, no tools required. Full specifications below.
- Product: Blockstream Jade Plus Squish Case
- Material: TPU 95 (thermoplastic polyurethane)
- Weight: 2 oz
- Color options: Orange, Black, Clear
- Compatible device: Blockstream Jade Plus hardware wallet only
- Design type: Custom-fitted protective shell
- Print quality: Award-winning CryptoCloaks precision 3D printing
- Price: $6.99
- Origin: Made in America
This case is compatible with the Jade Plus only. It does not fit the original Jade or any other Blockstream device. Verify your model before ordering.
How It Compares
Most Jade Plus owners either use no case at all or settle for a generic silicone sleeve designed for a loosely similar device. Here is how the CryptoCloaks Blockstream Jade Plus case measures up against those options.
| Feature | CryptoCloaks Squish Case | Generic or No Case |
|---|---|---|
| Custom fit design | Yes, designed specifically for Jade Plus | No, generic one-size-fits-most |
| Material quality | Flexible TPU 95 for protective cushioning | Rigid silicone or plastic, often stiff |
| Button accessibility | Full unrestricted access, verified by buyers | Often requires trimming or works around buttons poorly |
| Price | $6.99 | $8 to $15 for generic alternatives |
| Print precision | 3D-printed by CryptoCloaks, tight tolerances | Mass-produced molded cases, loose fit |
Frequently Asked Questions
Does this TPU case protect the Jade Plus screen and buttons during travel?
Yes. The Blockstream Jade Plus case wraps the full body of your device with TPU 95, a material that compresses on impact rather than cracking, so drops and bumps are absorbed before they reach the hardware. The case covers the screen area, the sides, and the back, which addresses the main points of wear for a device that spends time in a pocket or bag alongside keys and other items. The custom fit keeps the case firmly in position during travel rather than shifting and exposing the device to friction. Additionally, TPU 95 does not harden or become brittle in colder temperatures the way some rigid plastics do, which matters if you travel to cold environments. Verified buyers carry their Jade Plus daily in this case without issue. For a hardware wallet you rely on to store real value, that level of baseline protection is worth $6.99 without debate.
Will the case interfere with Jade Plus button operation?
No, and that is one of the core design priorities of the Squish Case. The Blockstream Jade Plus case features precisely placed cutouts modeled against the actual device geometry, not estimated clearances. Generic cases commonly fail here in one of two ways: the material is thick enough to create resistance over the button area, or the cutout positions do not align correctly with the Jade Plus layout and require trimming to fix. CryptoCloaks addresses these problems before the design ships by testing against the real device. Verified buyer reviews confirm that every button on the Jade Plus remains fully functional and responsive with the case fitted. Therefore, you can sign transactions, verify addresses, and navigate menus normally without removing the case each time. If you ever encounter an issue, CryptoCloaks stands behind its work and Ricky handles support directly.
Why choose TPU over silicone for protecting a hardware wallet?
Silicone and TPU feel similar out of the box, but they perform differently over months of real use. Silicone tends to stretch and lose its original shape after repeated removal and refitting, meaning a snug silicone case today may be a sloppy one six months from now. It also attracts lint and debris more aggressively and discolors faster with UV and skin contact. TPU 95, however, holds dimensional stability longer, bonds more cleanly to device surfaces, and provides firmer structural support without becoming brittle under pressure. For a hardware wallet, dimensional stability matters because a loose-fitting case offers minimal real protection. The Blockstream Jade Plus case made from TPU 95 delivers flexibility where it counts, on impact, and structural reliability where it matters, during daily carry. It is also easier to wipe clean than silicone alternatives, which is a practical consideration for a device you handle with your hands regularly.
Order your Blockstream Jade Plus case today and give your hardware wallet the protection it has earned. Choose from Orange, Black, or Clear. Bitcoin accepted. Made in America. Ships in 2-3 business days.
Sean (verified owner) –
Excellent print quality! Jade plus snapped right into the case with just a little bit of pressure. Very easy button access. No slot for the lanyard but not a worry with this case protecting it now.