Quick answer: What is the CryptoCloaks Bitkey Mount?
The CryptoCloaks Bitkey Mount is a purpose-built, 3D-printed holder for the second-generation Bitkey with the screen. It gives the device a dedicated location on a wall, desk, shelf, cabinet, or other suitable flat surface. Choose a screw-ready mount or a screwless 3M-tape setup. The mount starts at $6. Bitkey hardware is not included.
Bitkey Mount for the second-generation Bitkey with screen
Keep your Bitkey hardware organized instead of leaving it loose on a desk, buried in a drawer, or mixed into a pile of cables. This compact holder is shaped around the second-generation, screen-equipped Bitkey hardware device and provides a repeatable storage location near your Bitcoin setup.
The pictured hardware is the newer Bitkey introduced in 2026 with an OLED touchscreen and fingerprint sensor. Its enclosure differs from the original screenless model. This mount fits the second-generation Bitkey with the screen shown in the product photos. It does not fit the first-generation screenless Bitkey.
Why use a dedicated Bitkey hardware wallet mount?
A predictable home
Keep your second-generation Bitkey in one known place instead of searching through desk clutter when you need the hardware device.
Two install styles
Choose a screw-ready version for mechanical mounting or a screwless version intended for 3M tape on a suitable clean, flat surface.
Made to order
Printed by CryptoCloaks for Bitcoin hardware setups, with optional text and color customization available on the product form.
Choose Screw or Screwless mounting
Screw
Select Screw when you want a mount with mechanical fastening points. This is the stronger choice for wood, an appropriate anchored surface, or an installation where the mount will hold against gravity for long periods. Choose fasteners and anchors that match the mounting surface.
Screwless
Select Screwless for a clean installation using 3M tape rather than drilled fasteners. Adhesive mounting performs best on a clean, smooth, non-porous surface. Clean the surface first, press the mount firmly into place, and allow the adhesive to bond before loading the device. Adhesive performance depends on the surface, preparation, temperature, and installation.
Do not place the mount where a release could cause the hardware device to fall onto a person, a hard floor, or another object. The screw-ready option is recommended when maximum mechanical retention matters.
Bitkey Mount color and customization options
The standard mount is black. The product form also matches the customization setup used on the CryptoCloaks MK5 ColdCard Mount:
- Custom text: add up to 8 characters to the top of the mount for an additional $3.
- Custom mount color: choose an available custom color for an additional $3.
- Installation style: choose Screw or Screwless before adding the mount to your cart.
Because CryptoCloaks prints each mount to order, small layer lines and normal surface variation are part of the 3D-printing process.
What is included?
- One CryptoCloaks Bitkey Mount in the selected installation style
- Your selected custom text or custom color when purchased through the add-on fields
Not included: Bitkey hardware device, phone, Bitcoin, cables, tools, wall anchors, furniture, or any item not explicitly listed in the selected product configuration. The Bitkey shown in the photo demonstrates fit only.
Compatibility and fit
| Product | CryptoCloaks Bitkey Mount |
|---|---|
| Compatible device | Second-generation Bitkey with OLED touchscreen |
| First-generation screenless Bitkey | Not compatible |
| Mounting choices | Screw or Screwless 3M-tape installation |
| Standard color | Black |
| Custom text | Optional, up to 8 characters, +$3 |
| Custom color | Optional available colors, +$3 |
| Manufacturing | 3D printed to order by CryptoCloaks |
| Base price | $6.00 before optional add-ons |
| Hardware wallet included | No |
About second-generation Bitkey compatibility
This mount is shaped for the current screen-equipped Bitkey, introduced in 2026. Bitkey lists an OLED touchscreen display, biometric fingerprint sensor, NFC, USB-C charging, and a 66 mm x 60 mm x 13.6 mm enclosure. Read the manufacturer’s introduction to the new Bitkey for device details.
This CryptoCloaks mount is a physical storage and organization accessory only. It does not generate, store, back up, recover, or secure Bitcoin keys, and it does not change the security model of the Bitkey wallet. Follow Bitkey’s official instructions for setup, use, recovery, firmware, and account security.
Bitkey Mount vs leaving the device loose
| Feature | CryptoCloaks Bitkey Mount | Loose storage |
|---|---|---|
| Device location | Dedicated, repeatable spot | Can move around a desk or drawer |
| Installation choice | Screw or screwless | None |
| Customization | Optional text and color | None |
| Purpose-built fit | For the second-generation Bitkey with the screen | No retention or defined placement |
Installation guide
- Confirm that your hardware is the second-generation Bitkey with the screen shown in this listing.
- Choose a location that keeps the device accessible without exposing it to heat, moisture, direct sunlight, impact, or cable strain.
- For the Screw version, select fasteners and anchors suitable for the surface. Check for wiring and plumbing before drilling.
- For the Screwless version, clean and dry a smooth mounting surface before applying the 3M tape.
- Install the empty mount first and verify that it is stable.
- Insert the Bitkey gently. Never force a device that does not match the pictured second-generation form factor.
- Recheck the mount periodically, especially after temperature changes or if adhesive is used.
Explore more Bitcoin hardware mounts
Building a cleaner Bitcoin workstation? Browse the CryptoCloaks Docks & Mounts collection for other purpose-built hardware wallet holders and mounting accessories.
Bitkey Mount FAQ
Which Bitkey does this mount fit?
It is designed for the second-generation Bitkey with the screen shown in the product photos.
Does this fit the first-generation screenless Bitkey?
No. The original screenless Bitkey has a different enclosure. Order this mount only for the pictured second-generation screen-equipped device.
Is a Bitkey hardware wallet included?
No. This listing includes the 3D-printed mount only. The Bitkey device in the photo demonstrates fit and is not included.
What is the difference between Screw and Screwless?
The Screw option provides mechanical mounting points. The Screwless option is intended for installation with 3M tape on a suitable clean, smooth surface.
Can I install the Bitkey Mount under a desk?
Yes, if the chosen surface and mounting method can safely support the mount and device. For long-term overhead or against-gravity installation, the screw-ready option provides the strongest mechanical retention.
Can I mount it on a wall or inside a cabinet?
Yes, on a suitable flat surface. Use appropriate screws and anchors or properly applied 3M tape based on the surface and installation direction.
What color is the standard mount?
The standard mount is black. Optional custom colors are available through the product add-on selector for an additional $3.
Can I add text to the mount?
Yes. Optional custom text of up to 8 characters is available for an additional $3.
Is the custom color fee charged in addition to custom text?
Yes. Custom text and custom color are separate optional add-ons, each priced at $3.
Does this mount improve Bitkey’s digital security?
No. It is a physical organization accessory. It does not alter Bitkey’s keys, signing, recovery, fingerprint approval, firmware, or multisig security model.
Is this an official Bitkey product?
No. This is an independent CryptoCloaks accessory made for the second-generation screen-equipped Bitkey hardware device. CryptoCloaks is not affiliated with or endorsed by Block, Inc. or Bitkey.
Where is the Bitkey Mount made?
It is 3D printed to order by CryptoCloaks.
Reviews
There are no reviews yet.