Trezor Safe Mount for Trezor Safe 3 and Trezor Safe 5
Your Trezor is worth protecting, but leaving it loose on a desk puts expensive hardware at risk of theft, damage, or simply being knocked to the floor. The Trezor Safe Mount from CryptoCloaks gives your device a secure, discreet home for $7.99, without drilling into walls or settling for a generic shelf that was never designed for a hardware wallet.
Table of Contents
What Is the Trezor Safe Mount
The Trezor Safe Mount is a purpose-built bracket designed to hold your Trezor Safe 3 or Trezor Safe 5 securely under a desk, on a wall, or inside a cabinet. CryptoCloaks engineered this mount specifically for these two devices, so the fit is exact rather than approximate. No adapters, no foam padding, no hoping it stays put.
Generic stands treat your hardware wallet like any small gadget. This mount treats it like the secure signing device it is. It keeps your Trezor accessible when you need it and hidden from view the rest of the time, adding a layer of physical security that an open shelf simply cannot provide.
The design supports two installation methods. Use #8 screws for a permanent, rock-solid install. Or choose the 3M tape option for a clean, damage-free placement that will not leave residue on painted surfaces. Either way, the Trezor Safe Mount holds firm once in place and stays there.
Why CryptoCloaks
CryptoCloaks has been operating in the Bitcoin space since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop in America. When you order a Trezor Safe Mount, you are not waiting on an overseas warehouse or trusting a faceless fulfillment center to get the details right.
Every unit is printed to order. That means fresh material, not old stock sitting in a bin for months. It also means CryptoCloaks can offer color options, black or white, and fulfill orders quickly without carrying excess inventory. The result is a product that arrives in good condition and fits as designed.
CryptoCloaks builds mounts for a range of hardware wallets, not just Trezor. If you run a multi-wallet security setup, browse the full lineup at Other hardware wallet mounts to find options for your entire stack. Every product ships from the same American shop, with the same level of care.
Specs and Compatibility
The Trezor Safe Mount fits the Trezor Safe 3 and Trezor Safe 5 only. It does not accommodate older Trezor hardware like the Model One or Model T. If you are unsure which version you own, the Trezor Safe 5 official specs page lists the physical dimensions you need to confirm compatibility before ordering.
- Compatible Models: Trezor Safe 3, Trezor Safe 5
- Mounting Methods: #8 Screws or 3M Tape
- Materials: 3D Printed (to order)
- Colors: Black, White
- Dimensions: 9″ × 6″ × 1″
- Weight: 3 oz
- Price: $7.99
- Fulfillment: Printed to order, ships from America
At 3 oz and $7.99, this is one of the most cost-effective physical security upgrades you can make for your hardware wallet setup. The compact dimensions keep the footprint minimal whether you mount it under a desk, on a wall stud, or inside a storage enclosure.
How It Compares
The Trezor Safe Mount outperforms the alternatives across every dimension that matters: device fit, price, discretion, and installation method. Here is a direct side-by-side breakdown:
| Feature | Trezor Safe Mount (CryptoCloaks) | Generic Stand or DIY |
|---|---|---|
| Installation Damage | Zero damage: 3M tape or optional #8 screws | Requires wall holes or remains loose |
| Price | $7.99 | $15-30 for generic stands |
| Device Fit | Purpose-designed for Safe 3 and Safe 5 | Generic shelves, poor ergonomics for wallets |
| Discretion | Under-desk or wall mounted, hidden from view | Exposed on a visible shelf |
| Made By | Bitcoiners building for Trezor users | Mass-produced for general consumer use |
DIY solutions require trial-and-error and risk permanent damage to your device housing. Generic stands leave your hardware visible to anyone who walks past. The Trezor Safe Mount solves both problems at $7.99 flat, with no technical skill required for installation.
Frequently Asked Questions
Will this Trezor Safe Mount work with the Trezor Safe 7?
The Trezor Safe Mount is engineered specifically for the Trezor Safe 3 and Trezor Safe 5. Newer models like the Trezor Safe 7 may carry different physical dimensions and are not confirmed compatible with this bracket. CryptoCloaks designs each mount to precise device specifications, so compatibility is never assumed based on brand family alone. If you own a Safe 7 or another newer Trezor variant, contact CryptoCloaks directly to ask whether a compatible mount exists or is currently in development. Older Trezor hardware, including the Model One and Model T, uses a different form factor entirely and will not seat correctly in this bracket. Always verify your exact device model before adding to cart to avoid a return.
Does the 3M tape option damage walls or leave residue?
3M Command-style tape is designed to release cleanly from most painted drywall, wood, and smooth surfaces when removed using the proper pull-tab method. Under typical conditions, you will see no residue and no surface damage after removal. However, results vary depending on wall surface type, paint finish, and how long the tape has been in place. Fresh paint, wallpaper, and heavily textured surfaces carry a higher risk of peeling. CryptoCloaks recommends testing a small strip of 3M tape on an inconspicuous area before committing to a permanent placement. The #8 screw option is always available as an alternative if you prefer a mechanical mount that does not rely on adhesive. Both methods hold the device securely under normal use conditions.
How durable is a 3D printed mount over the long term?
CryptoCloaks prints the Trezor Safe Mount using quality filament selected for structural reliability. Because the mount holds a lightweight device in a static position rather than bearing dynamic mechanical load, the material faces minimal stress in everyday use. Under normal indoor conditions, a properly printed mount will last for years without cracking, warping, or losing its grip on the wall surface. Extended UV exposure can affect some filament types over time, so placing the mount away from direct sunlight is a reasonable precaution. If you ever need a replacement down the line, CryptoCloaks prints every unit to order, so you can reorder an identical mount at any time. At $7.99, replacing one several years from now is a low-stakes decision.
Pick up your Trezor Safe Mount today and stop leaving your hardware exposed. Bitcoin accepted. Made in America. Ships in 2-3 business days.
Jerry Kingsbury (verified owner) –