Quick answer: What is the CryptoCloaks Jade Plus Mount?
The CryptoCloaks Jade Plus Mount is a purpose-built, 3D-printed holder for the Blockstream Jade Plus hardware wallet. It gives the device a dedicated location on a wall, desk, shelf, cabinet, or other suitable flat surface. Choose a screw-ready version or a screwless setup designed for 3M mounting tape. The mount starts at $6. Jade Plus hardware is not included.
Blockstream Jade Plus mount for a cleaner Bitcoin setup
A hardware wallet works better when you know exactly where it is. This compact Jade Plus holder keeps the device in a repeatable spot instead of leaving it loose on a desk, buried in a drawer, or mixed into a pile of cables.
The mount is shaped for the newer Jade Plus form factor shown in the product photos. Blockstream lists the Jade Plus at 65 × 30 × 12 mm, with a 1.9-inch display, camera, USB-C, Bluetooth, and SD card or USB-drive support. The original Blockstream Jade uses a different enclosure. This listing is for Jade Plus only and is not compatible with the original Jade.
Why use a dedicated Jade Plus hardware wallet holder?
A predictable home
Keep your Jade Plus in one known location near your Bitcoin signing setup.
Two mounting styles
Choose screw-ready mounting or a screwless version for a clean 3M-tape installation.
Printed to order
Made by CryptoCloaks for Bitcoin hardware setups, with optional custom colors.
Choose Screw or Screwless mounting
Screw
Select Screw when you want visible mechanical fastening points. Choose screws and anchors that match the mounting surface, and check for wiring or plumbing before drilling.
Screwless
Select Screwless for an installation designed around suitable 3M mounting tape. Adhesive mounting works best on a clean, smooth, non-porous surface. Surface preparation, temperature, tape selection, and installation direction all affect the bond.
For overhead or against-gravity placement, use the screw-ready version when maximum mechanical retention matters. Do not install the mount where a release could drop the device onto a person, a hard floor, or another object.
Jade Plus Mount color options
The standard mount is black. Optional custom colors are available through the product add-on selector for an additional $3. Because every mount is 3D printed to order, normal layer lines and slight surface variation are part of the manufacturing process.
What is included?
- One CryptoCloaks Jade Plus Mount in the selected Screw or Screwless configuration
- Your selected custom color when purchased through the add-on field
Not included: Jade Plus hardware wallet, screws, wall anchors, tools, furniture, cables, Bitcoin, or any item not explicitly listed in the selected product configuration. The Jade Plus shown in the photos demonstrates fit only.
Jade Plus Mount specifications
| Product | CryptoCloaks Jade Plus Mount |
|---|---|
| Compatible device | Blockstream Jade Plus |
| Original Blockstream Jade | Not compatible |
| Mounting choices | Screw or Screwless 3M-tape setup |
| Standard color | Black |
| Custom color | Optional available colors, +$3 |
| Manufacturing | 3D printed to order by CryptoCloaks |
| Base price | $6.00 before optional add-ons |
| Hardware wallet included | No |
About Jade Plus compatibility
This holder is designed for the Blockstream Jade Plus form factor. Blockstream lists the Jade Plus enclosure at 65 × 30 × 12 mm and offers reinforced-plastic and metal versions. Confirm that your device is a Jade Plus before ordering. Do not force an original Jade or another hardware wallet into the holder.
This CryptoCloaks mount is a physical organization accessory only. It does not generate, store, back up, recover, or secure Bitcoin keys, and it does not change the Jade Plus security model. Follow Blockstream’s official instructions for setup, firmware, signing, recovery, and device security.
Installation guide
- Confirm that your device is the Jade Plus shown in this listing, not the original Jade.
- Choose a dry location away from heat, moisture, direct sunlight, impact, and cable strain.
- For the Screw version, use fasteners and anchors suitable for the mounting surface.
- For the Screwless version, clean and dry a smooth mounting surface before applying suitable 3M mounting tape.
- Install the empty mount first and verify that it is stable.
- Insert the Jade Plus gently. Never force a device that does not match the Jade Plus form factor.
- Recheck the installation periodically, especially after temperature changes or when adhesive is used.
Explore more Bitcoin hardware mounts
Browse the CryptoCloaks Docks & Mounts collection for other purpose-built Bitcoin hardware wallet holders, including the separate original Blockstream Jade Mount.
Jade Plus Mount FAQ
Which Blockstream device does this mount fit?
It is designed for the Blockstream Jade Plus form factor shown in the product photos.
Does it fit the original Blockstream Jade?
No. The original Jade uses a different enclosure. Use the separate original Blockstream Jade Mount instead.
Is a Jade Plus hardware wallet included?
No. This listing includes the 3D-printed mount only. The device shown in the photos demonstrates fit.
What is the difference between Screw and Screwless?
The Screw version provides mechanical fastening points. The Screwless version is designed for installation with suitable 3M mounting tape on a clean, smooth surface.
Can I mount it under a desk?
Yes, if the surface and mounting method can safely support the mount and device. The screw-ready version is the stronger choice for long-term against-gravity installation.
Can I install it on a wall or inside a cabinet?
Yes, on a suitable flat surface. Use the mounting method appropriate for the surface and installation direction.
What color is the standard mount?
The standard color is black. Optional custom colors are available for an additional $3.
Does this mount improve digital security?
No. It is a physical storage and organization accessory. It does not alter the Jade Plus keys, signing process, recovery, firmware, or security model.
Is this an official Blockstream product?
No. This is an independent CryptoCloaks accessory made for the Blockstream Jade Plus hardware wallet. CryptoCloaks is not affiliated with or endorsed by Blockstream.
Where is the Jade Plus Mount made?
It is 3D printed to order by CryptoCloaks.
Reviews
There are no reviews yet.