Best Blockstream Jade Wallet Mount: Screw or Screwless, $7.99
Your Blockstream Jade sits on the desk collecting scratches while you hunt for a mount that actually fits it. The Blockstream Jade wallet mount from CryptoCloaks is sized to the Jade’s exact footprint, ships from a bitcoin-native shop in America, and gives you two clean install options for $7.99.
Table of Contents
What Is the Blockstream Jade Wallet Mount
The Blockstream Jade wallet mount is a purpose-built holder machined to the Jade’s exact 3 x 2 x 1 inch body. It is not a universal cradle, not a repurposed phone stand, and not a generic clip that happens to grip it loosely. Every dimension was drawn for one device: the Blockstream Jade hardware wallet.
At checkout, you pick your install method. The screw variant uses four #8 screws and locks the mount permanently to wood, drywall, or any substrate that accepts a fastener. The screwless variant uses industrial-grade 3M tape and removes cleanly without pulling paint or leaving residue. Both versions deliver identical fit and hold. The choice is purely about your surface and your preference for permanence.
Blockstream sells the Jade through their official store, but they offer zero mounting or storage accessories. The Blockstream Jade wallet mount fills that gap. Whether your Jade lives on a standing desk, inside a cabinet, or mounted under a shelf, this holder gives it a dedicated, secure spot that keeps it accessible without looking like an afterthought.
Why CryptoCloaks
CryptoCloaks has been 3D printing bitcoin hardware since 2017. Ricky, the founder, personally picks, prints, and ships every order from his shop in America. There is no warehouse, no fulfillment contractor, and no overseas production line. When your Blockstream Jade wallet mount ships, a real person who has been in the bitcoin space for years packed it.
Every mount is printed to order. That matters because tolerances stay tight. A unit that has been sitting in a bin for six months will fit differently than one printed fresh to your order. CryptoCloaks prints fresh, calibrates regularly, and stands behind every unit it ships. The result is a jade hardware wallet mount that seats the device on the first try, every time.
CryptoCloaks builds device-specific mounts across the full range of bitcoin hardware. The MK3 ColdCard Mount is a popular companion piece for setups that run a Jade and a ColdCard side by side. The design philosophy is consistent across every product: tight tolerances, dual install options, and quality that reflects bitcoin-native standards rather than mass-production shortcuts.
Specs and Compatibility
- Compatible Device: Blockstream Jade hardware wallet
- Mount Dimensions: 3 x 2 x 1 in
- Weight: 1 oz
- Mount Options: Screw (4x #8 screws) or Screwless (3M tape)
- Material: 3D printed to order
- SKU: CC-HW-BLOCJADEMOUN
- Price: $7.99
- Origin: Made in America
The screw variant ships with four #8 screws included. The screwless variant arrives with the 3M tape pre-positioned on the back plate. Select your install method from the product options dropdown before adding to cart. No additional hardware is required beyond what ships in the package.
This Blockstream Jade wallet mount is sized for the original Jade form factor. If you own the Jade Plus, review the FAQ below before ordering to confirm fit details.
How It Compares
The market for bitcoin hardware wallet holders falls into two categories: the Blockstream official store (which sells the device but offers no mounting accessories) and generic adhesive clips on Amazon (which use universal sizing and adhesive-only installs). The Blockstream Jade wallet mount is neither of those.
| Feature | CryptoCloaks | Competitors |
|---|---|---|
| Device Fit | Precision-sized for Blockstream Jade | Universal, loose fit |
| Install Method | Screw (4x #8) or 3M tape | Adhesive only |
| Removability | Screwless variant leaves no residue | Adhesive often damages surface |
| Made for Bitcoin Users | Yes, bitcoin-native brand since 2017 | No |
| Price | $7.99 | $5 to $15 (generic sizing) |
Generic holders compete on price by cutting corners on fit. A universal cradle might cost a dollar less, but loose tolerances mean the Jade shifts over time and the install never feels intentional. Additionally, most generic options lock you into adhesive as the only mounting method. The jade mount screwless option from CryptoCloaks gives you industrial tape as a clean alternative, while the screw option gives you a permanent, load-bearing install that generic clips cannot match.
Frequently Asked Questions
Will this mount fit the Blockstream Jade Plus as well as the original Jade?
The Blockstream Jade wallet mount is dimensioned specifically for the original Blockstream Jade hardware wallet, which measures 3 x 2 x 1 inches. The Jade Plus carries a slightly different form factor, with a larger display and revised casing dimensions that do not match the original Jade’s footprint. Therefore, this mount is not guaranteed to be a snug fit for the Jade Plus. CryptoCloaks designs each holder to match the exact device specs rather than approximating a close-enough fit. If you own a Jade Plus and want a dedicated mount, contact CryptoCloaks before ordering so Ricky can confirm compatibility or point you toward the correct option. Ordering the wrong size wastes your time and costs a return shipment. When in doubt, ask first.
What surfaces can I mount the Jade to? Does it work under a desk or inside a cabinet?
The Blockstream Jade wallet mount works on any flat surface where your chosen hardware can grip. The screw variant is ideal for wood surfaces: the underside of a desk, the inside of a cabinet door, or a wall panel. Four #8 screws provide a permanent, load-bearing hold that will not shift. The screwless 3M tape variant performs best on smooth, non-porous surfaces such as metal desk legs, glass panels, or powder-coated enclosures. It is not recommended for textured drywall or rough wood, where the adhesive bond will be weaker. For under-desk installs where the mount must hold against gravity long-term, the screw version is the stronger choice. For clean desk setups where you want zero holes, the 3M tape variant holds reliably on any smooth horizontal or vertical surface.
Does the screwless version hold securely long-term, or will the 3M tape fail over time?
The jade mount screwless variant uses industrial-grade 3M tape, the same adhesive category used in automotive trim and commercial signage. On a clean, smooth surface, this bond holds firmly for years under the weight of a Blockstream Jade hardware wallet. The tape is rated for far more than the 1 oz static load this mount carries. However, long-term performance depends on surface prep. Clean the mounting surface with isopropyl alcohol before applying, press firmly for 30 seconds, and allow 24 hours for the adhesive to fully cure before loading the device into the mount. Avoid mounting on freshly painted walls before the paint has fully hardened. Follow those steps and the Blockstream Jade wallet mount will stay in place indefinitely. If the tape ever needs replacing, 3M VHB replacement strips are available at any hardware store.
Add the Blockstream Jade wallet mount to your cart and give your signing device the dedicated, secure home it deserves. Bitcoin accepted. Made in America. Ships in 2-3 business days.
Reviews
There are no reviews yet.