BitAxe Triple Miner Stand: One Compact Unit for Three Miners
Running three BitAxe miners on a cluttered desk is a real problem for the serious home miner. The BitAxe triple miner stand from CryptoCloaks fits your Supra 401, Supra 403, and Gamma 601 into one clean, fully customizable $19.99 unit so you stop stacking miners on whatever surface happens to be free.
Table of Contents
What Is the BitAxe Triple Miner Stand
The BitAxe triple miner stand is a purpose-built 3D-printed display and cooling stand designed to hold three BitAxe miners simultaneously. It supports the Supra 401, Supra 403, and Gamma 601 with confirmed fitment tested for each slot. One stand replaces three separate single-unit alternatives at a fraction of the combined cost.
Each slot holds a fully assembled BitAxe miner securely in an upright position. The spacing between slots supports natural airflow around the boards. Whether you run your cluster on a desk, a shelf, or in a dedicated mining corner, this stand brings structure to the setup. The three-slot design is not a workaround. CryptoCloaks built it from the ground up for multi-miner home rigs, and it shows in the fit.
The official BitAxe open-source Bitcoin miner project has built a strong community of home miners, hardware hackers, and long-term stackers who care about quality and open-source design. CryptoCloaks has been making accessories for that community since 2017, and the BitAxe triple miner stand reflects the same attention to detail that goes into every product Ricky ships from his shop.
Why CryptoCloaks
Most stands available on Amazon or Etsy hold one miner, come in one or two colors, and offer no upgrade path. CryptoCloaks approaches the problem differently. Ricky personally designs, prints, and ships every single order from America. He has been doing it since 2017. Quality control is not a department here. It is a one-person standard enforced on every unit before it leaves the shop.
Color customization is a major differentiator with this stand. You choose an independent color for each of the three case slots and for the stand base itself, giving you four separate selections from 25-plus filament options. Solid colors, metallic finishes, and fade filaments are all on the table. No other stand listing offers per-slot personalization across all four components. Browse the full lineup in the BitAxe accessories from CryptoCloaks collection to see every filament option available for your build.
Additionally, the built-in 60mm rear fan mount sets this BitAxe triple miner stand apart from every competitor currently on the market. Pair it with a compatible fan splitter and you get active cooling across your full three-miner cluster without drilling, modifying, or hacking anything together. That is a practical, integrated upgrade that matters when miners run continuously around the clock.
BitAxe Triple Miner Stand Specs and Compatibility
- SKU: CC-BA-BITATRIPSTAN
- Miner capacity: 3 BitAxe miners
- Compatible boards: Supra 401, Supra 403, Gamma 601
- Color options: 25+ per slot with independent selection for each of the three cases and the stand base (solid, metallic, and fade filaments available)
- Fan mount: Built-in 60mm rear fan mount, compatible with fan splitter cables
- Price: $19.99
- Rating: 5.00 out of 5 (3 verified reviews)
- Printed and shipped from: America, 2-3 business days
How It Compares
The BitAxe triple miner stand holds three miners where every competing product holds one. The table below compares it directly against the most visible stand listings on Amazon and Etsy.
| Feature | CryptoCloaks BitAxe Triple Stand | Competitors (Amazon and Etsy) |
|---|---|---|
| Miner capacity | 3 BitAxes | 1 BitAxe |
| Board compatibility | Supra 401, Supra 403, Gamma 601 | Supra 401 only (varies by listing) |
| Color customization | 25+ options per slot, all four components selected independently | 1-2 fixed colors |
| Rear fan mount | Yes, 60mm fan compatible | No |
| Price | $19.99 | Varies; handmade and Etsy listings often higher per unit for a single-miner stand |
Frequently Asked Questions
Does the BitAxe Triple Stand fit the Gamma 601 as well as the Supra models?
Yes. The BitAxe triple miner stand includes confirmed fitment for the Supra 401, Supra 403, and Gamma 601 boards. CryptoCloaks tests each board configuration before a design goes into production, so you are not guessing at clearances or hoping the dimensions happen to work. Most competitor stands target the Supra 401 only and have never published confirmed Gamma 601 compatibility. If you run a mixed fleet that includes a Gamma 601 alongside Supra models, this stand is designed for exactly that configuration. All three boards sit in the stand simultaneously, which means your entire cluster stays in one organized unit rather than spread across three separate stands or improvised setups.
Can I add active cooling to the triple stand, and what fan size do I need?
Yes. The BitAxe triple miner stand includes a built-in 60mm rear fan mount. A standard 60mm PC fan drops directly into the mount, and the design supports fan splitter cables so you can route power from your existing miner hardware without adding extra adapters or wiring overhead. Active cooling at the cluster level is not something any competing BitAxe stand on the market currently offers. For three miners running around the clock, directing additional airflow across the cluster can reduce ambient heat buildup in a meaningful way. CryptoCloaks integrated the fan mount directly into the stand design, so no drilling, cutting, or modification is required. Pick up a quality 60mm fan and it slots right in.
Can I choose a different color for each BitAxe case slot and the stand base separately?
Yes. The BitAxe triple miner stand from CryptoCloaks gives you four independent color selections: one for each of the three case slots and one for the stand base. You choose from 25-plus filament options covering solid colors, metallic finishes, and fade filaments. Therefore, you can match all four components to a single theme, run a gradient across the slots, or pick a completely different color for each piece. The Amazon listing for the CryptoCloaks single stand does not offer the per-slot customization interface that the direct site provides. Ordering through CryptoCloaks directly is the only way to get full independent color control across all four components of the BitAxe triple miner stand.
The BitAxe triple miner stand is in stock and ready to ship. Pick your colors, place your order, and let Ricky handle the printing and packing. Bitcoin accepted. Made in America. Ships in 2-3 business days.
Steve (verified owner) –
Well made, fast shipping, holds my 3 Bitaxe’s securely with rear fans attached.
Alex (verified owner) –
Super dope stand for gigachads who own 3 bitaxes
Chance Reed (verified owner) –
Exactly what I needed for one of my triple stacks. Quality print and shipped fast.