Bitaxe Full Metal Premium Stand

The Bitaxe Full Metal Stand That Keeps Your Miner Stable and Running Cool

Plastic stands tip forward, trap heat against your PCB, and look like an afterthought on your desk. The bitaxe full metal stand from CryptoCloaks is fabricated from 3mm cold-rolled steel, powder coated matte black, and engineered to hold your open-source Bitcoin miner steady no matter what cooler you run on top of it.

Table of Contents

• What Is the Bitaxe Full Metal Stand
• Why CryptoCloaks
• Bitaxe Full Metal Stand Specs and Compatibility
• How It Compares
• FAQ

What Is the Bitaxe Full Metal Stand

The bitaxe full metal stand is a purpose-built operating and display stand for the Bitaxe series of open-source Bitcoin miners. Most stands flooding the market are injection-molded plastic or laser-cut acrylic. This one is different. CryptoCloaks fabricates it from 3mm cold-rolled steel, giving it a 6oz heft that keeps the entire assembly locked in position regardless of what cooler you bolt onto your board.

The design incorporates a standoff mounting system that creates a deliberate rear airflow gap between the stand surface and the Bitaxe PCB. That gap matters more than it looks. Flush-mounted plastic stands seal heat against the back of the board with nowhere to go. This stand lets ambient air circulate freely behind the PCB, which directly enables stable overclocking at higher frequencies without thermal throttling cutting your hashrate at the worst moment.

The matte black powder coat finish takes this beyond utilitarian hardware. Powder coat resists chipping from cables and desk contact better than paint, and the result is a finish that customers consistently describe as giving their Bitaxe the class it deserves. If you are going to run an open-source Bitcoin miner on your desk, it should look the part. The bitaxe full metal stand delivers that without compromise.

Why CryptoCloaks

The bitcoin hardware accessory market is flooded with generic plastic stands imported with no brand accountability and no design intention behind them. CryptoCloaks has operated in this space since 2017, building accessories specifically for the hardware the Bitcoin community actually runs. The bitaxe full metal stand is not a generic bracket retrofitted to fit. It was designed around Bitaxe dimensions and the real thermal demands of miners who push their hardware.

Ricky, the founder, personally picks, inspects, and ships every order from his shop in America. You are not buying from a fulfillment warehouse algorithm. You are buying from a builder who runs the same gear you run and cares about whether it performs correctly. That accountability shows up in the quality of the materials, the finish, and the hardware that ships in the box. Every order includes the screws and standoffs you need. Nothing extra to source.

CryptoCloaks builds a full ecosystem of hardware for the Bitaxe platform. The bitaxe full metal stand pairs naturally with everything else in the lineup. Browse all Bitaxe accessories from CryptoCloaks to see what else levels up your mining setup. Whether you are upgrading cooling, cable management, or display, there is a purpose-built option for it.

Bitaxe Full Metal Stand Specs and Compatibility

This stand is compatible with the Bitaxe Gamma, Ultra, Supra, and other models in the Bitaxe family. All mounting hardware ships in the box, so you have everything needed to install and secure your miner on arrival. The Bitaxe unit itself is sold separately.

• Material: 3mm cold-rolled steel
• Finish: Matte black powder coat
• Stand Weight: 6 oz
• Shipping Weight: 7 oz
• Dimensions: 8 × 4 × 3 in
• Hardware Included: Screws and standoffs
• Bitaxe Included: No
• SKU: CC-BA-BITAFULLMETA

The Bitaxe is a fully open-source Bitcoin mining platform built around the BM1368 ASIC chip. Learn more about the hardware this stand was designed to support at the official Bitaxe open-source Bitcoin miner project. The open-source nature of the platform means the community continues to push new board revisions and cooler upgrades, and the bitaxe full metal stand is built to handle that evolution.

How It Compares

Generic stands on Amazon undercut this stand on price by using the cheapest possible materials and skipping every feature that actually affects performance. Here is what the difference looks like side by side.

Feature	CryptoCloaks Bitaxe Full Metal Stand	Generic Competitors
Material	3mm cold-rolled steel	Plastic / acrylic
Stand Weight	6 oz	~1–2 oz
Finish	Matte black powder coat	Raw or painted plastic
Rear Airflow	Standoffs create gap for PCB cooling	Flush mount, no rear airflow
Cooler Compatibility	Stable with Argon THRML and heavy coolers	Tips forward under added weight

The weight gap tells the most important part of the story. A 1oz plastic stand cannot hold position when you add an Argon THRML or any comparable aftermarket cooler. The bitaxe full metal stand at 6oz provides the base mass and stability that heavy cooler builds demand. Additionally, the standoff system is not a feature generic manufacturers include because it adds cost and complexity to production. CryptoCloaks includes it because it meaningfully improves thermal performance for miners who overclock. Therefore, the price difference between this stand and a generic plastic option reflects a real difference in what you get, not just branding.

Frequently Asked Questions

Does this metal stand fit all Bitaxe models including the Gamma, Ultra, and Supra?

Yes. The bitaxe full metal stand is designed to accommodate the Bitaxe Gamma, Ultra, and Supra models, as well as other standard Bitaxe variants in the open-source lineup. The mounting dimensions follow the common Bitaxe board layout, and the included screws and standoffs are sized to fit the standard mounting hole pattern shared across the Bitaxe family. If you are running a newer Bitaxe revision and want to confirm fit before ordering, reach out to CryptoCloaks directly. Ricky handles support personally and can confirm compatibility for your specific board before you spend a dollar. The stand does not include a Bitaxe unit. That is sourced separately through the Bitaxe ecosystem or other open-source hardware vendors.

Will this stand hold steady with a larger aftermarket cooler like the Argon THRML installed?

Yes, and this is one of the primary reasons CryptoCloaks chose 3mm cold-rolled steel for the bitaxe full metal stand rather than following competitors into plastic. Aftermarket coolers like the Argon THRML add significant weight to the top of the Bitaxe board, shifting the center of gravity forward and upward. Lightweight plastic and acrylic stands tip under that load, which is not just an inconvenience but a real risk to your hardware. At 6oz, the bitaxe full metal stand provides a low center of gravity and a stable base that does not shift when heavier hardware sits on top. The standoff mounting system also ensures the board is positively secured to the stand rather than resting loosely on a shelf. Therefore, even with the additional mass of a substantial upgraded cooler installed, the stand holds its position reliably without adjustment or additional support.

How do the standoffs improve airflow compared to a flush-mounted plastic stand?

A flush-mounted plastic stand presses the back of the Bitaxe PCB directly against a solid surface, creating a sealed boundary that traps heat with no path for convective cooling. The standoffs included with the bitaxe full metal stand create a deliberate physical gap between the rear of the PCB and the stand body. That gap allows ambient air to circulate freely behind the board, drawing accumulated heat away from components on the back of the PCB before it builds up. For miners running stock clock settings this is a measurable improvement. However, for miners pushing higher frequencies through overclocking, rear board temperature becomes a direct constraint on performance. Reducing heat accumulation on the PCB surface allows the board to sustain higher clock rates without thermal throttling stepping in to protect the hardware. The standoff design therefore supports both the thermal ceiling and the sustained overclocking stability of your Bitaxe build.

The bitaxe full metal stand ships ready to mount, with all hardware included and zero guesswork. At $24.99, it is the last stand your Bitaxe will ever need. Bitcoin accepted. Made in America. Ships in 2-3 business days.