Canaan Avalon Q Exhaust Shroud – 6″ or 8″ Duct | 3D Printed Bitcoin Miner Cooling

Canaan Avalon Q Exhaust Shroud: The Original Design

Stop blasting hot miner air sideways into your living room.

The CryptoCloaks Canaan Avalon Q exhaust shroud is the original exhaust solution designed specifically for the Canaan Avalon Q bitcoin miner. Channel your miner’s exhaust heat through a proper 6″ or 8″ flex duct — out a window, into an HVAC vent, or anywhere you need it. Customers running the Canaan Avalon Q exhaust shroud report a massive difference in ambient room temperature.

This is the shroud that started it all. Designed in-house at CryptoCloaks in Colorado, this is the original Avalon Q shroud design — not a knockoff, not a copy. Built by a real bitcoiner who mines at home and knows exactly what the problem is.

───

HOW IT FITS

Installing your Canaan Avalon Q exhaust shroud takes under 5 minutes. It slips directly onto the two existing screws on the back of your Canaan Avalon Q. Secured on the other side with zip ties for a flush, airtight fit. No drilling. No modifications. No extra tools.

Want an extra-tight seal? A strip of tape on one side finishes the job — but most customers find it unnecessary right out of the box.

───

CHOOSE YOUR DUCT SIZE

→ 6″ — Standard HVAC flex duct. Works with most window kits and dryer vent setups.
→ 8″ — Maximum airflow. If you’re running serious ducting or already know your setup, go 8″.

Not sure? Go 8″. You can always reduce with an adapter. You can’t add what isn’t there.

───

WHY PETG

Your Canaan Avalon Q exhaust shroud runs 24/7 so material quality isn’t optional. We print in PETG — not PLA. PLA softens around 140°F, which is dangerously close to the temps your Canaan Q exhaust generates during long mining sessions. PETG handles sustained heat up to 176°F without deforming.

───

THE HEAT PROBLEM NO ONE TALKS ABOUT

Most home miners underestimate how much heat a Canaan Avalon Q actually puts out. At 1,674W of power draw, you’re pumping a serious amount of warm air into whatever room it’s sitting in. In a bedroom or home office, that adds up fast — especially if you’re running it 24/7 like you should be.

Without proper exhaust ducting, you’re fighting your own HVAC system. Your AC runs harder to compensate, your electricity bill climbs, and your miner’s ambient intake temperature creeps up — which hurts efficiency and long-term hardware health.

The fix is simple: duct the exhaust out. One Canaan Avalon Q exhaust shroud, one length of flex duct, and your room stays comfortable while the miner runs flat out.

───

THE SPACE HEATER ANGLE

A lot of CryptoCloaks customers run their Avalon Q as a space heater in winter. Instead of ducting heat outside, they route it into a cold room, garage, or workshop. The Canaan Avalon Q exhaust shroud makes this easy — point the duct wherever you need the heat, not just wherever the miner happens to be facing.

It’s one of the reasons we built this in the first place. Bitcoin mining that pays you in sats AND heats your space is just efficient living.

───

COMPATIBILITY

This Canaan Avalon Q exhaust shroud is designed and tested specifically for the Canaan Avalon Q. Not a universal fit — built for this machine, by people who actually own and run this machine.

Running multiple miners? Check out our BitAxe Stand and BitAxe Gamma 601 for a complete home mining setup.

★★★★★ “Makes a huge difference in ambient room temperature by removing the heated air to the outside.” — Verified customer

★★★★★ “Fits Avalon Q well!” — Verified customer

16 reviews · 5.0 stars

—

Printed beefier than standard shrouds. 18 oz, 10×8×5 inches. Available in Orange, Yellow, White, and Black.
Made in Colorado on professional Bambu printers.
Ships in 2-3 business days.
Bitcoin accepted.

Running multiple miners? Check out our BitAxe Stand and BitAxe Gamma 601 for a complete home mining setup.